* [PATCH] arm64: dts: rockchip: Enable I2C2 on UNIHIKER M10 V1.2
@ 2026-10-10 23:28 Miotsuki Mizuno
0 siblings, 0 replies; only message in thread
From: Miotsuki Mizuno @ 2026-10-10 23:28 UTC (permalink / raw)
To: heiko
Cc: conor+dt, devicetree, krzk+dt, linux-arm-kernel, linux-kernel,
linux-rockchip, robh
The onboard resistive touchscreen controller is connected to I2C2.
Enable the controller at the tested 400 kHz bus frequency. Its GPIO2_A2
and GPIO2_A3 pinmux is provided by rk3308.dtsi.
Keep the bus enablement separate from the touchscreen device node so
it can be reviewed without depending on the pending NS2009 binding
and driver. The controller-only configuration was booted on M10 V1.2
with no NS2009 device instantiated.
Signed-off-by: Mizuno Miotsuki <founder@crepuse.com>
---
arch/arm64/boot/dts/rockchip/rk3308-unihiker-m10-v1.2.dts | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3308-unihiker-m10-v1.2.dts b/arch/arm64/boot/dts/rockchip/rk3308-unihiker-m10-v1.2.dts
index 270ea970c95a..0c03f118378a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308-unihiker-m10-v1.2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3308-unihiker-m10-v1.2.dts
@@ -131,6 +131,11 @@ &emmc {
status = "okay";
};
+&i2c2 {
+ clock-frequency = <400000>;
+ status = "okay";
+};
+
&io_domains {
vccio0-supply = <&vcc_io>;
vccio1-supply = <&vcc_io>;
base-commit: ae965b9856f033145e292b0c29082a26bcc45efd
--
2.56.0
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2026-10-10 23:28 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-10-10 23:28 [PATCH] arm64: dts: rockchip: Enable I2C2 on UNIHIKER M10 V1.2 Miotsuki Mizuno
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®