[PATCH] iio: common: cros_ec_sensors: use sensor_scale union member for CALIBSCALE

[PATCH] iio: common: cros_ec_sensors: use sensor_scale union member for CALIBSCALE

[Arnav Kapoor]

The IIO_CHAN_INFO_CALIBSCALE read and write paths send
MOTIONSENSE_CMD_SENSOR_SCALE, but set the flags through the
sensor_offset member of the request union, while the scale values in
the write path are filled through sensor_scale.

This only works because the sensor_offset and sensor_scale structs of
struct ec_params_motion_sense happen to place flags at the same offset.
Use the sensor_scale member that matches the command, so all fields of
the request are set through the same struct.

No functional change.

Assisted-by: LLM
Signed-off-by: Arnav Kapoor <kapoorarnav43@gmail.com>
---
Compile-tested only (W=1); I don't have ChromeOS EC hardware. Both
union members place flags at the same offset, so the generated host
command is unchanged.

 drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
index 551b86236abc..2839714f5bc8 100644
--- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
@@ -70,7 +70,7 @@ static int cros_ec_sensors_read(struct iio_dev *indio_dev,
 		break;
 	case IIO_CHAN_INFO_CALIBSCALE:
 		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_SCALE;
-		st->core.param.sensor_offset.flags = 0;
+		st->core.param.sensor_scale.flags = 0;
 
 		ret = cros_ec_motion_send_host_cmd(&st->core, 0);
 		if (ret == -EPROTO || ret == -EOPNOTSUPP) {
@@ -178,8 +178,7 @@ static int cros_ec_sensors_write(struct iio_dev *indio_dev,
 		/* Send to EC for each axis, even if not complete */
 
 		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_SCALE;
-		st->core.param.sensor_offset.flags =
-			MOTION_SENSE_SET_OFFSET;
+		st->core.param.sensor_scale.flags = MOTION_SENSE_SET_OFFSET;
 		for (i = CROS_EC_SENSOR_X; i < CROS_EC_SENSOR_MAX_AXIS; i++)
 			st->core.param.sensor_scale.scale[i] =
 				st->core.calib[i].scale;
-- 
2.53.0

Re: [PATCH] iio: common: cros_ec_sensors: use sensor_scale union member for CALIBSCALE

[Joshua Crofts]

On Sun, 11 Oct 2026 10:24:08 +0530
Arnav Kapoor <kapoorarnav43@gmail.com> wrote:

> The IIO_CHAN_INFO_CALIBSCALE read and write paths send
> MOTIONSENSE_CMD_SENSOR_SCALE, but set the flags through the
> sensor_offset member of the request union, while the scale values in
> the write path are filled through sensor_scale.
> 
> This only works because the sensor_offset and sensor_scale structs of
> struct ec_params_motion_sense happen to place flags at the same offset.
> Use the sensor_scale member that matches the command, so all fields of
> the request are set through the same struct.
> 
> No functional change.
> 
> Assisted-by: LLM
> Signed-off-by: Arnav Kapoor <kapoorarnav43@gmail.com>
> ---

Please add a Fixes tag. Otherwise looks good to me!

Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>

-- 
Kind regards,
Joshua Crofts