[PATCH 2/3] clk: nuvoton: ma35d1: use the generic divider for the ADC clock

[Joey Lu <a0987203069@gmail.com>]

The ADC clock divider implements rate = parent_rate / (2 * (N + 1)),
which is what the generic clk divider already provides with
CLK_DIVIDER_EVEN_INTEGERS. Use it with CLK_DIVIDER_ROUND_CLOSEST, as the
dedicated driver did, instead of a private clk_ops implementation. This
also keeps the rate request propagation handled by
divider_determine_rate().

The dedicated driver additionally OR'd a caller-supplied mask bit into
the divider register on every set_rate(). Its only caller passed a
bitmask (0x1ffff) rather than a bit index, which made BIT() shift by an
out-of-range amount, and nothing requires an extra bit to be forced, so
that behavior is not carried over.

Signed-off-by: Joey Lu <a0987203069@gmail.com>
---
 drivers/clk/nuvoton/clk-ma35d1.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/nuvoton/clk-ma35d1.c b/drivers/clk/nuvoton/clk-ma35d1.c
index 09e6ceeb2c556..523493e42e38c 100644
--- a/drivers/clk/nuvoton/clk-ma35d1.c
+++ b/drivers/clk/nuvoton/clk-ma35d1.c
@@ -1014,10 +1014,11 @@ static int ma35d1_clocks_probe(struct platform_device *pdev)
 	hws[QEI2_GATE] = ma35d1_clk_gate(dev, "qei2_gate", "pclk1",
 					 clk_base + REG_CLK_APBCLK2, 14);
 
-	hws[ADC_DIV] = ma35d1_reg_adc_clkdiv(dev, "adc_div", hws[PCLK0],
-					     &ma35d1_lock, 0,
-					     clk_base + REG_CLK_CLKDIV4,
-					     4, 17, 0x1ffff);
+	hws[ADC_DIV] = devm_clk_hw_register_divider_parent_hw(dev, "adc_div", hws[PCLK0], 0,
+							      clk_base + REG_CLK_CLKDIV4, 4, 17,
+							      CLK_DIVIDER_EVEN_INTEGERS |
+							      CLK_DIVIDER_ROUND_CLOSEST,
+							      &ma35d1_lock);
 	hws[ADC_GATE] = ma35d1_clk_gate(dev, "adc_gate", "adc_div",
 					clk_base + REG_CLK_APBCLK2, 24);
 
-- 
2.43.0