From: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
To: "Maxime Ripard" <mripard@kernel.org>,
"Dave Stevenson" <dave.stevenson@raspberrypi.com>,
"Maíra Canal" <mcanal@igalia.com>,
"Raspberry Pi Kernel Maintenance" <kernel-list@raspberrypi.com>,
"Maarten Lankhorst" <maarten.lankhorst@linux.intel.com>,
"Thomas Zimmermann" <tzimmermann@suse.de>,
"David Airlie" <airlied@gmail.com>,
"Simona Vetter" <simona@ffwll.ch>
Cc: kernel@collabora.com, dri-devel@lists.freedesktop.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 1/8] drm/vc4: hdmi: Use common TMDS char rate constants
Date: Tue, 13 Oct 2026 01:37:41 +0300 [thread overview]
Message-ID: <20261013-vc4-common-scramb-v2-1-a41d15e131ad@collabora.com> (raw)
In-Reply-To: <20261013-vc4-common-scramb-v2-0-a41d15e131ad@collabora.com>
Replace HDMI_14_MAX_TMDS_CLK defined locally with
HDMI_1_3_TMDS_CHAR_RATE_MAX_HZ provided by linux/hdmi.h. Note this
incorrectly referenced HDMI 1.4, as the 340 MHz maximum TMDS character
rate was actually introduced in HDMI 1.3.
Similarly, use HDMI_2_0_TMDS_CHAR_RATE_MAX_HZ instead of the 600000000
magic number.
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 17 ++++++++---------
1 file changed, 8 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 3a90dbb61f4e..8e4623ccc4f8 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -45,6 +45,7 @@
#include <linux/clk.h>
#include <linux/component.h>
#include <linux/gpio/consumer.h>
+#include <linux/hdmi.h>
#include <linux/i2c.h>
#include <linux/of.h>
#include <linux/of_address.h>
@@ -113,8 +114,6 @@
#define HSM_MIN_CLOCK_FREQ 120000000
#define CEC_CLOCK_FREQ 40000
-#define HDMI_14_MAX_TMDS_CLK (340 * 1000 * 1000)
-
static bool vc4_hdmi_supports_scrambling(struct vc4_hdmi *vc4_hdmi)
{
struct drm_display_info *display = &vc4_hdmi->connector.display_info;
@@ -137,7 +136,7 @@ static bool vc4_hdmi_mode_needs_scrambling(const struct drm_display_mode *mode,
{
unsigned long long clock = drm_hdmi_compute_mode_clock(mode, bpc, fmt);
- return clock > HDMI_14_MAX_TMDS_CLK;
+ return clock > HDMI_1_3_TMDS_CHAR_RATE_MAX_HZ;
}
static int vc4_hdmi_debugfs_regs(struct seq_file *m, void *unused)
@@ -1728,7 +1727,7 @@ vc4_hdmi_connector_clock_valid(const struct drm_connector *connector,
if (clock > vc4_hdmi->variant->max_pixel_clock)
return MODE_CLOCK_HIGH;
- if (!vc4->hvs->vc5_hdmi_enable_hdmi_20 && clock > HDMI_14_MAX_TMDS_CLK)
+ if (!vc4->hvs->vc5_hdmi_enable_hdmi_20 && clock > HDMI_1_3_TMDS_CHAR_RATE_MAX_HZ)
return MODE_CLOCK_HIGH;
/* 4096x2160@60 is not reliable without overclocking core */
@@ -3254,7 +3253,7 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
* vc4_hdmi_disable_scrambling() will thus run at boot, make
* sure it's disabled, and avoid any inconsistency.
*/
- if (variant->max_pixel_clock > HDMI_14_MAX_TMDS_CLK)
+ if (variant->max_pixel_clock > HDMI_1_3_TMDS_CHAR_RATE_MAX_HZ)
vc4_hdmi->scdc_enabled = true;
ret = variant->init_resources(drm, vc4_hdmi);
@@ -3384,7 +3383,7 @@ static const struct vc4_hdmi_variant bcm2711_hdmi0_variant = {
.encoder_type = VC4_ENCODER_TYPE_HDMI0,
.debugfs_name = "hdmi0_regs",
.card_name = "vc4-hdmi-0",
- .max_pixel_clock = 600000000,
+ .max_pixel_clock = HDMI_2_0_TMDS_CHAR_RATE_MAX_HZ,
.registers = vc5_hdmi_hdmi0_fields,
.num_registers = ARRAY_SIZE(vc5_hdmi_hdmi0_fields),
.phy_lane_mapping = {
@@ -3413,7 +3412,7 @@ static const struct vc4_hdmi_variant bcm2711_hdmi1_variant = {
.encoder_type = VC4_ENCODER_TYPE_HDMI1,
.debugfs_name = "hdmi1_regs",
.card_name = "vc4-hdmi-1",
- .max_pixel_clock = HDMI_14_MAX_TMDS_CLK,
+ .max_pixel_clock = HDMI_1_3_TMDS_CHAR_RATE_MAX_HZ,
.registers = vc5_hdmi_hdmi1_fields,
.num_registers = ARRAY_SIZE(vc5_hdmi_hdmi1_fields),
.phy_lane_mapping = {
@@ -3442,7 +3441,7 @@ static const struct vc4_hdmi_variant bcm2712_hdmi0_variant = {
.encoder_type = VC4_ENCODER_TYPE_HDMI0,
.debugfs_name = "hdmi0_regs",
.card_name = "vc4-hdmi-0",
- .max_pixel_clock = 600000000,
+ .max_pixel_clock = HDMI_2_0_TMDS_CHAR_RATE_MAX_HZ,
.registers = vc6_hdmi_hdmi0_fields,
.num_registers = ARRAY_SIZE(vc6_hdmi_hdmi0_fields),
.phy_lane_mapping = {
@@ -3469,7 +3468,7 @@ static const struct vc4_hdmi_variant bcm2712_hdmi1_variant = {
.encoder_type = VC4_ENCODER_TYPE_HDMI1,
.debugfs_name = "hdmi1_regs",
.card_name = "vc4-hdmi-1",
- .max_pixel_clock = 600000000,
+ .max_pixel_clock = HDMI_2_0_TMDS_CHAR_RATE_MAX_HZ,
.registers = vc6_hdmi_hdmi1_fields,
.num_registers = ARRAY_SIZE(vc6_hdmi_hdmi1_fields),
.phy_lane_mapping = {
--
2.55.0
next prev parent reply other threads:[~2026-10-12 22:38 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-12 22:37 [PATCH v2 0/8] drm/vc4: hdmi: Convert to common HDMI 2.0 scrambling infrastructure Cristian Ciocaltea
2026-10-12 22:37 ` Cristian Ciocaltea [this message]
2026-10-12 22:37 ` [PATCH v2 2/8] drm/vc4: hdmi: Bump BCM2835 max pixel clock to 165 MHz Cristian Ciocaltea
2026-10-13 0:16 ` Cristian Ciocaltea
2026-10-13 15:59 ` Dave Stevenson
2026-10-13 16:58 ` Cristian Ciocaltea
2026-10-12 22:37 ` [PATCH v2 3/8] drm/vc4: hdmi: Switch to drm_hdmi_mode_needs_scrambling() Cristian Ciocaltea
2026-10-12 22:37 ` [PATCH v2 4/8] drm/vc4: hdmi: Switch to .force_ctx() connector helper Cristian Ciocaltea
2026-10-12 22:37 ` [PATCH v2 5/8] drm/vc4: hdmi: Propagate -EDEADLK to the top level Cristian Ciocaltea
2026-10-12 22:37 ` [PATCH v2 6/8] drm/vc4: hdmi: Convert to drmm_connector_hdmi_init() Cristian Ciocaltea
2026-10-12 22:37 ` [PATCH v2 7/8] drm/vc4: hdmi: Convert to common HDMI 2.0 scrambling infrastructure Cristian Ciocaltea
2026-10-12 22:37 ` [PATCH v2 8/8] drm/vc4: hdmi: Defer pixel clock validation to HDMI helpers Cristian Ciocaltea
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261013-vc4-common-scramb-v2-1-a41d15e131ad@collabora.com \
--to=cristian.ciocaltea@collabora.com \
--cc=airlied@gmail.com \
--cc=dave.stevenson@raspberrypi.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=kernel-list@raspberrypi.com \
--cc=kernel@collabora.com \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mcanal@igalia.com \
--cc=mripard@kernel.org \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®