* [PATCH V2] xhci: Reset TI usb controller on xhci shutdown
@ 2026-10-14 22:28 wenxiong
0 siblings, 0 replies; only message in thread
From: wenxiong @ 2026-10-14 22:28 UTC (permalink / raw)
To: mathias.nyman, gregkh
Cc: linux-usb, linux-kernel, stable, wenxiong, Wen Xiong
From: Wen Xiong <wenxiong@linux.ibm.com>
Fixes kexec boot. Without a hard reset, TI pci usb chips will fail to
initialize in a kexec booted kernel.
Signed-off-by: Wen Xixong <wenxiong@linux.ibm.com>
---
drivers/usb/host/xhci-pci.c | 11 ++++++++++-
drivers/usb/host/xhci.h | 1 +
2 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index a8889081ae82..36191639bf43 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -479,8 +479,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
pdev->device == PCI_DEVICE_ID_ASMEDIA_3042_XHCI)
xhci->quirks |= XHCI_RESET_ON_RESUME;
- if (pdev->vendor == PCI_VENDOR_ID_TI && pdev->device == 0x8241)
+ if (pdev->vendor == PCI_VENDOR_ID_TI && pdev->device == 0x8241) {
xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_7;
+ xhci->quirks |= XHCI_RESET_ON_SHUTDOWN;
+ }
if ((pdev->vendor == PCI_VENDOR_ID_BROADCOM ||
pdev->vendor == PCI_VENDOR_ID_CAVIUM) &&
@@ -950,6 +952,13 @@ static void xhci_pci_shutdown(struct usb_hcd *hcd)
/* Yet another workaround for spurious wakeups at shutdown with HSW */
if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
pci_set_power_state(pdev, PCI_D3hot);
+
+ /*
+ * TI xHCI controllers fail to initialize in a kexec
+ * kernel without a PCI function reset
+ */
+ if (xhci->quirks & XHCI_RESET_ON_SHUTDOWN)
+ pci_reset_function_locked(pdev);
}
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index c7bfa7f028d3..e94a38e5f4ac 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1647,6 +1647,7 @@ struct xhci_hcd {
#define XHCI_CDNS_SCTX_QUIRK BIT_ULL(48)
#define XHCI_ETRON_HOST BIT_ULL(49)
#define XHCI_LIMIT_ENDPOINT_INTERVAL_9 BIT_ULL(50)
+#define XHCI_RESET_ON_SHUTDOWN BIT_ULL(51)
unsigned int num_active_eps;
unsigned int limit_active_eps;
--
2.52.0
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2026-10-14 22:29 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-10-14 22:28 [PATCH V2] xhci: Reset TI usb controller on xhci shutdown wenxiong
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®