[PATCH RFC 0/2] riscv: dts: spacemit: Enable PowerVR GPU on OrangePi RV2

[PATCH RFC 0/2] riscv: dts: spacemit: Enable PowerVR GPU on OrangePi RV2

[Iker Pedrosa]

Enable the Imagination PowerVR Rogue GPU (BXE-2-32) on the SpacemiT K1
SoC for the OrangePi RV2 board.

This series depends on:
- Yixun Lan's power domain series [1], which provides the genpd-based
  GPU power domain driver required for proper power sequencing.
- Baihui Liang's dt-bindings patch [2], which adds the spacemit,k1-gpu
  compatible string to the img,powervr-rogue binding.

The GPU firmware is not yet available upstream. A copy can be found
at [3].

With this series applied on top of [1] and [2], the full GPU bring-up
path works end-to-end on hardware:
- Power domain: GPU power island on/off via APMU
- Clock: GPU clock enabled/gated through CCU
- Reset: GPU reset line deasserted
- Firmware: PowerVR RISC-V firmware loads and signals ready
- DMA: dma-ranges correctly maps CPU-to-GPU physical addresses
- DRM: kernel exposes /dev/dri/card0 and /dev/dri/renderD128
- IRQ: GPU interrupt registered, firmware watchdog running

Userspace rendering requires Mesa's PowerVR Vulkan driver
(imagination-experimental).

[1] https://lore.kernel.org/linux-riscv/20261008-04-k3-pm-support-v2-0-6f778a53dd2d@kernel.org/
[2] https://lore.kernel.org/linux-riscv/20261015-spacemit-gpu-binding-v1-1-a7a23c7e7788@linux.spacemit.com/
[2] https://gitlab.freedesktop.org/imagination/linux-firmware/-/blob/powervr/powervr/rogue_36.29.52.182_v1.fw

Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
---
Iker Pedrosa (2):
      riscv: dts: spacemit: k1: add PowerVR GPU device node
      riscv: dts: spacemit: k1-orangepi-rv2: enable GPU

 arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts |  4 ++++
 arch/riscv/boot/dts/spacemit/k1.dtsi             | 12 ++++++++++++
 2 files changed, 16 insertions(+)
---
base-commit: 7e986b457d43edf8dd3eb3f6c34e55e92cd545f3
change-id: 20260413-orangepi-gpu-02d839d6506f

Best regards,
-- 
Iker Pedrosa <ikerpedrosam@gmail.com>

[PATCH RFC 1/2] riscv: dts: spacemit: k1: add PowerVR GPU device node

[Iker Pedrosa]

Add device tree node for the Imagination Technologies PowerVR Rogue GPU
(BVNC 36.29.52.182 / BXE-2-32) found in the Spacemit K1 SoC.

The GPU is located at address 0xcac00000 and uses:
- CLK_GPU for core clock from APMU controller
- RESET_GPU for reset control from APMU controller
- K1_PMDOMAIN_GPU for power management from syscon_apmu provider
- IRQ 75 for interrupt handling

Disabled by default; boards enable it individually.

Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
---
 arch/riscv/boot/dts/spacemit/k1.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi
index 3fabfd34114b..82cade2f76fe 100644
--- a/arch/riscv/boot/dts/spacemit/k1.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k1.dtsi
@@ -5,6 +5,7 @@
 
 #include <dt-bindings/clock/spacemit,k1-syscon.h>
 #include <dt-bindings/phy/phy.h>
+#include <dt-bindings/power/spacemit,k1-power.h>
 
 #include "k1-pdma.h"
 
@@ -1119,6 +1120,17 @@ multimedia-bus {
 			#size-cells = <2>;
 			dma-ranges = <0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>,
 				     <0x0 0x80000000 0x1 0x00000000 0x3 0x80000000>;
+
+			gpu: gpu@cac00000 {
+				compatible = "spacemit,k1-gpu", "img,img-bxe-2-32", "img,img-rogue";
+				reg = <0x0 0xcac00000 0x0 0x80000>;
+				interrupts = <75>;
+				clocks = <&syscon_apmu CLK_GPU>;
+				clock-names = "core";
+				resets = <&syscon_apmu RESET_GPU>;
+				power-domains = <&syscon_apmu K1_PMDOMAIN_GPU>;
+				status = "disabled";
+			};
 		};
 
 		network-bus {

-- 
2.56.0

[PATCH RFC 2/2] riscv: dts: spacemit: k1-orangepi-rv2: enable GPU

[Iker Pedrosa]

Enable the PowerVR Rogue GPU on the OrangePi RV2 board by setting the
GPU device node status to "okay".

The GPU will use the clock, reset, and power management resources
defined in the k1.dtsi SoC device tree.

Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
---
 arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts b/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts
index b907a1396b21..cc375dd1a77d 100644
--- a/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts
@@ -384,3 +384,7 @@ &sdhci0 {
 	sd-uhs-sdr104;
 	status = "okay";
 };
+
+&gpu {
+	status = "okay";
+};

-- 
2.56.0