mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: chitranshmandhaniya@gmail.com
To: hansg@kernel.org, ilpo.jarvinen@linux.intel.com
Cc: platform-driver-x86@vger.kernel.org,
	linux-kernel@vger.kernel.org, Chitransh_Mandhaniya@dell.com
Subject: [PATCH v2 1/2] platform/x86: dell-uart-backlight: extract dell_uart_bl_receive_data() helper
Date: Thu, 15 Oct 2026 13:13:38 +0530	[thread overview]
Message-ID: <20261015074339.27388-2-chitranshmandhaniya@gmail.com> (raw)
In-Reply-To: <20261015074339.27388-1-chitranshmandhaniya@gmail.com>

From: Chitransh Mandhaniya <Chitransh_Mandhaniya@dell.com>

Move the response-byte processing and checksum validation out of
dell_uart_bl_receive() into a new dell_uart_bl_receive_data() helper.

No functional change. This is a preparatory refactor so that a
follow-up patch can call the helper again after resyncing on a stray
byte from the EC.

Signed-off-by: Chitransh Mandhaniya <Chitransh_Mandhaniya@dell.com>
---
 .../platform/x86/dell/dell-uart-backlight.c   | 42 ++++++++++++-------
 1 file changed, 27 insertions(+), 15 deletions(-)

diff --git a/drivers/platform/x86/dell/dell-uart-backlight.c b/drivers/platform/x86/dell/dell-uart-backlight.c
index f323a667dc2d..b61499d7b3f8 100644
--- a/drivers/platform/x86/dell/dell-uart-backlight.c
+++ b/drivers/platform/x86/dell/dell-uart-backlight.c
@@ -205,20 +205,13 @@ static const struct backlight_ops dell_uart_backlight_ops = {
 	.get_brightness = dell_uart_get_brightness_op,
 };
 
-static size_t dell_uart_bl_receive(struct serdev_device *serdev, const u8 *data, size_t len)
+/* Process received UART data; returns bytes consumed or -1 if incomplete. */
+static int dell_uart_bl_receive_data(struct dell_uart_backlight *dell_bl,
+				     const u8 *data, size_t len)
 {
-	struct dell_uart_backlight *dell_bl = serdev_device_get_drvdata(serdev);
 	size_t i;
 	u8 csum;
 
-	dev_dbg(dell_bl->dev, "Recv: %*ph\n", (int)len, data);
-
-	/* Throw away unexpected bytes / remainder of response after an error */
-	if (dell_bl->status != -EBUSY) {
-		dev_warn(dell_bl->dev, "Bytes received out of band, dropping them.\n");
-		return len;
-	}
-
 	i = 0;
 	while (i < len && dell_bl->resp_idx != dell_bl->resp_len) {
 		dell_bl->resp[dell_bl->resp_idx] = data[i++];
@@ -231,7 +224,7 @@ static size_t dell_uart_bl_receive(struct serdev_device *serdev, const u8 *data,
 				dev_err(dell_bl->dev, "Response length %d out if range %d - %d\n",
 					dell_bl->resp_len, MIN_RESP_LEN, dell_bl->resp_max_len);
 				dell_bl->status = -EIO;
-				goto wakeup;
+				return i;
 			}
 			break;
 		case RESP_CMD: /* CMD byte */
@@ -239,7 +232,7 @@ static size_t dell_uart_bl_receive(struct serdev_device *serdev, const u8 *data,
 				dev_err(dell_bl->dev, "Response cmd 0x%02x != pending 0x%02x\n",
 					dell_bl->resp[RESP_CMD], dell_bl->pending_cmd);
 				dell_bl->status = -EIO;
-				goto wakeup;
+				return i;
 			}
 			break;
 		}
@@ -247,7 +240,7 @@ static size_t dell_uart_bl_receive(struct serdev_device *serdev, const u8 *data,
 	}
 
 	if (dell_bl->resp_idx != dell_bl->resp_len)
-		return len; /* Response not complete yet */
+		return -1; /* Response not complete yet */
 
 	csum = dell_uart_checksum(dell_bl->resp, dell_bl->resp_len - 1);
 	if (dell_bl->resp[dell_bl->resp_len - 1] == csum) {
@@ -257,11 +250,30 @@ static size_t dell_uart_bl_receive(struct serdev_device *serdev, const u8 *data,
 			dell_bl->resp[dell_bl->resp_len - 1], csum);
 		dell_bl->status = -EIO;
 	}
-wakeup:
-	wake_up(&dell_bl->wait_queue);
 	return i;
 }
 
+static size_t dell_uart_bl_receive(struct serdev_device *serdev, const u8 *data, size_t len)
+{
+	struct dell_uart_backlight *dell_bl = serdev_device_get_drvdata(serdev);
+	int ret;
+
+	dev_dbg(dell_bl->dev, "Recv: %*ph\n", (int)len, data);
+
+	/* Throw away unexpected bytes / remainder of response after an error */
+	if (dell_bl->status != -EBUSY) {
+		dev_warn(dell_bl->dev, "Bytes received out of band, dropping them.\n");
+		return len;
+	}
+
+	ret = dell_uart_bl_receive_data(dell_bl, data, len);
+	if (ret < 0)
+		return len; /* Response not complete yet */
+
+	wake_up(&dell_bl->wait_queue);
+	return ret;
+}
+
 static const struct serdev_device_ops dell_uart_bl_serdev_ops = {
 	.receive_buf = dell_uart_bl_receive,
 	.write_wakeup = serdev_device_write_wakeup,
-- 
2.43.0


  reply	other threads:[~2026-10-15  7:44 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-04 11:03 [PATCH] platform/x86: dell-uart-backlight: recover from stray EC response byte chitranshmandhaniya
2026-10-14 11:50 ` Ilpo Järvinen
2026-10-15  7:43 ` [PATCH v2 0/2] " chitranshmandhaniya
2026-10-15  7:43   ` chitranshmandhaniya [this message]
2026-10-15  7:43   ` [PATCH v2 2/2] " chitranshmandhaniya
2026-10-15 10:12     ` Ilpo Järvinen
2026-10-15 10:24     ` Ilpo Järvinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261015074339.27388-2-chitranshmandhaniya@gmail.com \
    --to=chitranshmandhaniya@gmail.com \
    --cc=Chitransh_Mandhaniya@dell.com \
    --cc=hansg@kernel.org \
    --cc=ilpo.jarvinen@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=platform-driver-x86@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®