[PATCH 0/5] Enable soundcard on Motorola Edge 30

[PATCH 0/5] Enable soundcard on Motorola Edge 30

[Val Packett]

This series enables sound support on motorola-dubai, at least the
speakers.. The WCD that handles microphones and analog USB-C sound
is left out because it would first need:
https://lore.kernel.org/all/20260522-kodiak-elite-macros-v1-1-487661ac1270@fairphone.com/

The senary MI2S patches were previously part of:
https://lore.kernel.org/all/20260506204142.659778-1-val@packett.cool/

and that series mixed up too many things and got bogged down due to
the TDM stuff that's not relevant to this device..

Thanks,
~val

---


Val Packett (5):
  ASoC: qcom: qdsp6: q6routing: add Senary MI2S ports
  ASoC: qcom: sm8250: add Senary MI2S RX support
  ASoC: dt-bindings: qcom,sm8250: Add Motorola Edge 30 sound card
  ASoC: qcom: sm8250: Add motorola-dubai soundcard compatible
  arm64: dts: qcom: motorola-dubai: Add sound card with aw88261 speakers

 .../bindings/sound/qcom,sm8250.yaml           |   1 +
 .../qcom/sm7325-motorola-dubai-common.dtsi    | 119 ++++++++++++++++++
 sound/soc/qcom/qdsp6/q6routing.c              |  11 ++
 sound/soc/qcom/sm8250.c                       |   9 ++
 4 files changed, 140 insertions(+)

-- 
2.55.0

[PATCH 1/5] ASoC: qcom: qdsp6: q6routing: add Senary MI2S ports

[Val Packett]

This commit adds support for senary MI2S mixers.

Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Val Packett <val@packett.cool>
---
 sound/soc/qcom/qdsp6/q6routing.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/sound/soc/qcom/qdsp6/q6routing.c b/sound/soc/qcom/qdsp6/q6routing.c
index d076c99f197f..ea511200c8d7 100644
--- a/sound/soc/qcom/qdsp6/q6routing.c
+++ b/sound/soc/qcom/qdsp6/q6routing.c
@@ -68,6 +68,7 @@
 	{ mix_name, "SEC_MI2S_TX", "SEC_MI2S_TX" },	\
 	{ mix_name, "QUAT_MI2S_TX", "QUAT_MI2S_TX" },	\
 	{ mix_name, "QUIN_MI2S_TX", "QUIN_MI2S_TX" },	\
+	{ mix_name, "SEN_MI2S_TX", "SEN_MI2S_TX" },	\
 	{ mix_name, "TERT_MI2S_TX", "TERT_MI2S_TX" },		\
 	{ mix_name, "SLIMBUS_0_TX", "SLIMBUS_0_TX" },		\
 	{ mix_name, "SLIMBUS_1_TX", "SLIMBUS_1_TX" },		\
@@ -152,6 +153,9 @@
 	SOC_SINGLE_EXT("QUIN_MI2S_TX", QUINARY_MI2S_TX,			\
 		id, 1, 0, msm_routing_get_audio_mixer,			\
 		msm_routing_put_audio_mixer),				\
+	SOC_SINGLE_EXT("SEN_MI2S_TX", SENARY_MI2S_TX,			\
+		id, 1, 0, msm_routing_get_audio_mixer,			\
+		msm_routing_put_audio_mixer),				\
 	SOC_SINGLE_EXT("SLIMBUS_0_TX", SLIMBUS_0_TX,			\
 		id, 1, 0, msm_routing_get_audio_mixer,			\
 		msm_routing_put_audio_mixer),				\
@@ -563,6 +567,9 @@ static const struct snd_kcontrol_new quaternary_mi2s_rx_mixer_controls[] = {
 static const struct snd_kcontrol_new quinary_mi2s_rx_mixer_controls[] = {
 	Q6ROUTING_RX_MIXERS(QUINARY_MI2S_RX) };
 
+static const struct snd_kcontrol_new senary_mi2s_rx_mixer_controls[] = {
+	Q6ROUTING_RX_MIXERS(SENARY_MI2S_RX) };
+
 static const struct snd_kcontrol_new tertiary_mi2s_rx_mixer_controls[] = {
 	Q6ROUTING_RX_MIXERS(TERTIARY_MI2S_RX) };
 
@@ -825,6 +832,9 @@ static const struct snd_soc_dapm_widget msm_qdsp6_widgets[] = {
 	SND_SOC_DAPM_MIXER("QUIN_MI2S_RX Audio Mixer", SND_SOC_NOPM, 0, 0,
 			   quinary_mi2s_rx_mixer_controls,
 			   ARRAY_SIZE(quinary_mi2s_rx_mixer_controls)),
+	SND_SOC_DAPM_MIXER("SEN_MI2S_RX Audio Mixer", SND_SOC_NOPM, 0, 0,
+			   senary_mi2s_rx_mixer_controls,
+			   ARRAY_SIZE(senary_mi2s_rx_mixer_controls)),
 	SND_SOC_DAPM_MIXER("TERT_MI2S_RX Audio Mixer", SND_SOC_NOPM, 0, 0,
 			   tertiary_mi2s_rx_mixer_controls,
 			   ARRAY_SIZE(tertiary_mi2s_rx_mixer_controls)),
@@ -1038,6 +1048,7 @@ static const struct snd_soc_dapm_route intercon[] = {
 	Q6ROUTING_RX_DAPM_ROUTE("SLIMBUS_6_RX Audio Mixer", "SLIMBUS_6_RX"),
 	Q6ROUTING_RX_DAPM_ROUTE("QUAT_MI2S_RX Audio Mixer", "QUAT_MI2S_RX"),
 	Q6ROUTING_RX_DAPM_ROUTE("QUIN_MI2S_RX Audio Mixer", "QUIN_MI2S_RX"),
+	Q6ROUTING_RX_DAPM_ROUTE("SEN_MI2S_RX Audio Mixer", "SEN_MI2S_RX"),
 	Q6ROUTING_RX_DAPM_ROUTE("TERT_MI2S_RX Audio Mixer", "TERT_MI2S_RX"),
 	Q6ROUTING_RX_DAPM_ROUTE("SEC_MI2S_RX Audio Mixer", "SEC_MI2S_RX"),
 	Q6ROUTING_RX_DAPM_ROUTE("PRI_MI2S_RX Audio Mixer", "PRI_MI2S_RX"),
-- 
2.55.0

[PATCH 2/5] ASoC: qcom: sm8250: add Senary MI2S RX support

[Val Packett]

Add support for the SENARY_MI2S_RX DAI which is used on some devices to
send audio data to speaker amplifiers.

Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Val Packett <val@packett.cool>
---
 sound/soc/qcom/sm8250.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/sound/soc/qcom/sm8250.c b/sound/soc/qcom/sm8250.c
index 76dc3a3f4a31..2d49b04cb1f6 100644
--- a/sound/soc/qcom/sm8250.c
+++ b/sound/soc/qcom/sm8250.c
@@ -112,6 +112,14 @@ static int sm8250_snd_startup(struct snd_pcm_substream *substream)
 		snd_soc_dai_set_fmt(cpu_dai, fmt);
 		snd_soc_dai_set_fmt(codec_dai, codec_dai_fmt);
 		break;
+	case SENARY_MI2S_RX:
+		codec_dai_fmt |= SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_I2S;
+		snd_soc_dai_set_sysclk(cpu_dai,
+			Q6AFE_LPASS_CLK_ID_SEN_MI2S_IBIT,
+			MI2S_BCLK_RATE, SNDRV_PCM_STREAM_PLAYBACK);
+		snd_soc_dai_set_fmt(cpu_dai, fmt);
+		snd_soc_dai_set_fmt(codec_dai, codec_dai_fmt);
+		break;
 	case LPI_MI2S_RX_0:
 		codec_dai_fmt |= SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_I2S;
 		snd_soc_dai_set_sysclk(cpu_dai,
-- 
2.55.0

[PATCH 3/5] ASoC: dt-bindings: qcom,sm8250: Add Motorola Edge 30 sound card

[Val Packett]

Document the bindings for the sound card on motorola-dubai which uses the
Elite DSP architecture.

Signed-off-by: Val Packett <val@packett.cool>
---
 Documentation/devicetree/bindings/sound/qcom,sm8250.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
index fc7bccdace0f..c76c9c670bc1 100644
--- a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
@@ -36,6 +36,7 @@ properties:
           - ayaneo,pocket-s2-sndcard
           - fairphone,fp4-sndcard
           - fairphone,fp5-sndcard
+          - motorola,dubai-sndcard
           - qcom,apq8096-sndcard
           - qcom,glymur-sndcard
           - qcom,qcm6490-idp-sndcard
-- 
2.55.0

[PATCH 4/5] ASoC: qcom: sm8250: Add motorola-dubai soundcard compatible

[Val Packett]

Add a compatible for the SM7325-based Motorola Edge 30 which can use this
machine driver.

Signed-off-by: Val Packett <val@packett.cool>
---
 sound/soc/qcom/sm8250.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/soc/qcom/sm8250.c b/sound/soc/qcom/sm8250.c
index 2d49b04cb1f6..5866f1f34b3d 100644
--- a/sound/soc/qcom/sm8250.c
+++ b/sound/soc/qcom/sm8250.c
@@ -215,6 +215,7 @@ static int sm8250_platform_probe(struct platform_device *pdev)
 static const struct of_device_id snd_sm8250_dt_match[] = {
 	{ .compatible = "fairphone,fp4-sndcard", .data = "sm7225" },
 	{ .compatible = "fairphone,fp5-sndcard", .data = "qcm6490" },
+	{ .compatible = "motorola,dubai-sndcard", .data = "sm7325" },
 	{ .compatible = "qcom,qrb2210-sndcard", .data = "qcm2290" },
 	{ .compatible = "qcom,qrb4210-rb2-sndcard", .data = "sm4250" },
 	{ .compatible = "qcom,qrb5165-rb5-sndcard", .data = "sm8250" },
-- 
2.55.0

[PATCH 5/5] arm64: dts: qcom: motorola-dubai: Add sound card with aw88261 speakers

[Val Packett]

Enable the sndcard node with three MultiMedia frontends, a USB offload
RX link, and two Awinic AW88261 speaker amps on senary MI2S.

While here, use the correct compatible for audiocc for this phone,
and remove references to power-domains from a 'reserved' node.

Signed-off-by: Val Packett <val@packett.cool>
---
 .../qcom/sm7325-motorola-dubai-common.dtsi    | 119 ++++++++++++++++++
 1 file changed, 119 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm7325-motorola-dubai-common.dtsi b/arch/arm64/boot/dts/qcom/sm7325-motorola-dubai-common.dtsi
index 3860ab8508a0..1e1c195de1af 100644
--- a/arch/arm64/boot/dts/qcom/sm7325-motorola-dubai-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm7325-motorola-dubai-common.dtsi
@@ -16,6 +16,8 @@
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
 
 #include "sm7325.dtsi"
 #include "pm7325.dtsi"
@@ -699,6 +701,40 @@ &gpu_zap_shader {
 	firmware-name = "qcom/sm7325/motorola/dubai/a660_zap.mbn";
 };
 
+&i2c1 {
+	clock-frequency = <100000>;
+
+	status = "okay";
+
+	/* Bottom speaker */
+	aw88261_r: audio-codec@34 {
+		compatible = "awinic,aw88261";
+		reg = <0x34>;
+
+		dvdd-supply = <&vreg_l18b_1p8>;
+		sound-name-prefix = "Amplifier R";
+		firmware-name = "qcom/sm7325/motorola/dubai/aw88261_acf.bin";
+
+		awinic,audio-channel = <0>;
+
+		#sound-dai-cells = <0>;
+	};
+
+	/* Top speaker / ear speaker */
+	aw88261_l: audio-codec@35 {
+		compatible = "awinic,aw88261";
+		reg = <0x35>;
+
+		dvdd-supply = <&vreg_l18b_1p8>;
+		sound-name-prefix = "Amplifier L";
+		firmware-name = "qcom/sm7325/motorola/dubai/aw88261_acf.bin";
+
+		awinic,audio-channel = <1>;
+
+		#sound-dai-cells = <0>;
+	};
+};
+
 &i2c4 {
 	clock-frequency = <100000>;
 
@@ -732,6 +768,11 @@ &ipa {
 	status = "okay";
 };
 
+&lpass_audiocc {
+	compatible = "qcom,qcm6490-lpassaudiocc";
+	/delete-property/ power-domains;
+};
+
 &pm7250b_adc {
 	channel@4e {
 		reg = <ADC5_AMUX_THM2_100K_PU>;
@@ -972,10 +1013,22 @@ &pon_resin {
 	status = "okay";
 };
 
+&q6afedai {
+	dai@147 {
+		reg = <SENARY_MI2S_RX>;
+		qcom,sd-lines = <0>;
+	};
+};
+
 &qfprom {
 	vcc-supply = <&vdd_qfprom>;
 };
 
+&qup_i2c1_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
 &qup_spi13_cs {
 	drive-strength = <6>;
 	bias-pull-down;
@@ -1066,6 +1119,72 @@ &rmtfs_mem {
 		    <QCOM_SCM_VMID_NAV>;
 };
 
+&sound {
+	compatible = "motorola,dubai-sndcard";
+	model = "Motorola-dubai";
+
+	pinctrl-0 = <&lpass_i2s2_active>;
+	pinctrl-1 = <&lpass_i2s2_sleep>;
+	pinctrl-names = "default",
+			"sleep";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	i2s-dai-link {
+		link-name = "Senary MI2S Playback";
+
+		codec {
+			sound-dai = <&aw88261_l>, <&aw88261_r>;
+		};
+
+		cpu {
+			sound-dai = <&q6afedai SENARY_MI2S_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+
+	usb-dai-link {
+		link-name = "USB Playback";
+
+		codec {
+			sound-dai = <&q6usbdai USB_RX>;
+		};
+
+		cpu {
+			sound-dai = <&q6afedai USB_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+};
+
 &spi13 {
 	status = "okay";
 
-- 
2.55.0

Re: (subset) [PATCH 0/5] Enable soundcard on Motorola Edge 30

[Mark Brown]

On Fri, 16 Oct 2026 04:31:48 -0300, Val Packett wrote:
> Enable soundcard on Motorola Edge 30
> 
> This series enables sound support on motorola-dubai, at least the
> speakers.. The WCD that handles microphones and analog USB-C sound
> is left out because it would first need:
> https://lore.kernel.org/all/20260522-kodiak-elite-macros-v1-1-487661ac1270@fairphone.com/
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-7.4

Thanks!

[1/5] ASoC: qcom: qdsp6: q6routing: add Senary MI2S ports
      https://git.kernel.org/broonie/sound/c/2b20c976bb63
[2/5] ASoC: qcom: sm8250: add Senary MI2S RX support
      https://git.kernel.org/broonie/sound/c/41c6eb15291f
[3/5] ASoC: dt-bindings: qcom,sm8250: Add Motorola Edge 30 sound card
      https://git.kernel.org/broonie/sound/c/a0f1887655af
[4/5] ASoC: qcom: sm8250: Add motorola-dubai soundcard compatible
      https://git.kernel.org/broonie/sound/c/32c9d661dab0

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

Re: [PATCH 3/5] ASoC: dt-bindings: qcom,sm8250: Add Motorola Edge 30 sound card

[Krzysztof Kozlowski]

On Fri, Oct 16, 2026 at 04:31:51AM -0300, Val Packett wrote:
> Document the bindings for the sound card on motorola-dubai which uses the
> Elite DSP architecture.
> 
> Signed-off-by: Val Packett <val@packett.cool>
> ---
>  Documentation/devicetree/bindings/sound/qcom,sm8250.yaml | 1 +

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

Best regards,
Krzysztof