[PATCH] firmware: tegra: bpmp: populate debugfs in the background

[PATCH] firmware: tegra: bpmp: populate debugfs in the background

[Austin Schuh]

Populating the BPMP debugfs mirror takes a series of synchronous BPMP
requests, several per directory.  On an Orin Nano (Tegra234) the tree has
about 10,800 entries, and the BPMP probe doesn't return for over five
seconds.  Every device that gets its clocks, resets or power domains from
the BPMP waits for it, which on Tegra234 is nearly all of them, so PCIe,
NVMe and the root filesystem all come up five seconds late.

Commit c7fc690da6f1 ("firmware: tegra: bpmp: Allow BPMP debugfs population
to be skipped") lets a system that doesn't need the mirror turn it off with
tegra_bpmp.debugfs=0.  A system that does use it, for instance to set
clocks from userspace at boot, still pays the full cost.

Nothing in the kernel uses the mirror, and the probe already only logs an
error from it, so populate it from a workqueue instead.  It isn't an
async_schedule() job, since kernel_init() waits for all of those before it
starts init.  Userspace that reads the mirror right after boot may find it
still being filled in.

Measured with initcall_debug on an Orin Nano running 6.18.39 with
NVIDIA's patches: the BPMP probe returns after 1.2 seconds instead of
6.36 seconds.

Assisted-by: LLM
Signed-off-by: Austin Schuh <austin.linux@gmail.com>
---

Notes:
    Based on tegra/for-7.4/firmware (1bbcf4a19f14).  Built for arm64, W=1,
    no new warnings.  The timing is from the same change on 6.18.39 with
    NVIDIA's patches (where the probe also has the VDK check), which is what
    our board runs; I haven't booted this branch on it.

 drivers/firmware/tegra/bpmp.c | 35 ++++++++++++++++++++++++++++++++---
 1 file changed, 32 insertions(+), 3 deletions(-)

diff --git a/drivers/firmware/tegra/bpmp.c b/drivers/firmware/tegra/bpmp.c
index d3508e98e338..535ebbd55a6f 100644
--- a/drivers/firmware/tegra/bpmp.c
+++ b/drivers/firmware/tegra/bpmp.c
@@ -16,6 +16,7 @@
 #include <linux/semaphore.h>
 #include <linux/sched/clock.h>
 #include <linux/slab.h>
+#include <linux/workqueue.h>
 
 #include <soc/tegra/bpmp.h>
 #include <soc/tegra/bpmp-abi.h>
@@ -1052,8 +1053,26 @@ int tegra_bpmp_init_dt_providers(struct tegra_bpmp *bpmp)
 	return 0;
 }
 
+struct tegra_bpmp_debugfs_work {
+	struct work_struct work;
+	struct tegra_bpmp *bpmp;
+};
+
+static void tegra_bpmp_debugfs_work_fn(struct work_struct *work)
+{
+	struct tegra_bpmp_debugfs_work *dw =
+		container_of(work, struct tegra_bpmp_debugfs_work, work);
+	int err;
+
+	err = tegra_bpmp_init_debugfs(dw->bpmp);
+	if (err < 0)
+		dev_err(dw->bpmp->dev, "debugfs initialization failed: %d\n",
+			err);
+}
+
 static int tegra_bpmp_probe(struct platform_device *pdev)
 {
+	struct tegra_bpmp_debugfs_work *debugfs_work;
 	struct tegra_bpmp *bpmp;
 	char tag[TAG_SZ];
 	int err;
@@ -1089,9 +1108,19 @@ static int tegra_bpmp_probe(struct platform_device *pdev)
 	if (err < 0)
 		dev_err(&pdev->dev, "failed to initialize sysfs: %d\n", err);
 
-	err = tegra_bpmp_init_debugfs(bpmp);
-	if (err < 0)
-		dev_err(&pdev->dev, "debugfs initialization failed: %d\n", err);
+	/*
+	 * Mirroring the BPMP's debugfs tree takes several requests per
+	 * directory, which on Tegra234 adds up to seconds.  Nothing else
+	 * waits for it, so do it in the background rather than hold up every
+	 * device that depends on the BPMP.
+	 */
+	debugfs_work = devm_kzalloc(&pdev->dev, sizeof(*debugfs_work),
+				    GFP_KERNEL);
+	if (debugfs_work) {
+		debugfs_work->bpmp = bpmp;
+		INIT_WORK(&debugfs_work->work, tegra_bpmp_debugfs_work_fn);
+		queue_work(system_dfl_long_wq, &debugfs_work->work);
+	}
 
 	return 0;
 

base-commit: 1bbcf4a19f1495f769b69e9569d8c1e81df074f5
-- 
2.47.3