[PATCH v3 0/2] arm64: dts: qcom: sda660-inforce-ifc6560: fix the ADV7535 interrupt

[Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>]

The ADV7535 HDMI bridge on the IFC6560 fails to probe because its
interrupt points at the wrong PMIC: the ADV7535 is wired to PM660
GPIO11, while the DT uses PM660L GPIO11, a power control output driven
by the bootloader. Point the interrupt at the PM660 and configure the
pad as an input instead of relying on its bootloader state.

---
Changes in v3:
- Moved the interrupt to PM660 PMIC.
- Moved the pinctrl state to the PM660 and added the output-disable
  property, dropping the review.
- Link to v2: https://patch.msgid.link/20261019-ifc6560-adv-v2-1-ade625df3fe3@oss.qualcomm.com

Changes in v2:
- Dropped extra empty line (Konrad)
- Added a note about pull-up for the IRQ line present on the PCB.
- Link to v1: https://patch.msgid.link/20260920-ifc6560-adv-v1-1-89b1435d00c2@oss.qualcomm.com

To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konradybcio@kernel.org>
To: Abel Vesa <abelvesa@kernel.org>
To: Rob Herring <robh@kernel.org>
To: Krzysztof Kozlowski <krzk+dt@kernel.org>
To: Conor Dooley <conor+dt@kernel.org>
To: Dmitry Baryshkov <lumag@kernel.org>
To: Marijn Suijten <marijn.suijten@somainline.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

---
Dmitry Baryshkov (2):
      arm64: dts: qcom: sda660-inforce-ifc6560: fix ADV7535 interrupt parent
      arm64: dts: qcom: sda660-inforce-ifc6560: fix ADV7535 interrupt pin

 arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)
---
base-commit: 2efb7a11f1aa4d2dc285fe2680cca22cb9f72f64
change-id: 20260920-ifc6560-adv-b8ed1242008b

Best regards,
--  
With best wishes
Dmitry