[PATCH v3 1/2] arm64: dts: qcom: sda660-inforce-ifc6560: fix ADV7535 interrupt parent

[Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>]

Probing the ADV7535 HDMI bridge fails on the IFC6560:

  gpio gpiochip3: (800f000.spmi:pmic@2:gpio@c000): gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ
  gpio gpiochip3: (800f000.spmi:pmic@2:gpio@c000): unable to lock HW IRQ 10 for IRQ

The bridge's interrupt line, HDMI_INT_N, is wired to GPIO11 of the PM660,
not of the PM660L. PM660L GPIO11 is LPKs_CTRL, an output which the
bootloader drives high, so gpiochip_lock_as_irq() refuses to turn it
into an interrupt and requesting the interrupt fails.

Point the interrupt at the PM660 GPIO.

Fixes: 34279d6e3f32 ("arm64: dts: qcom: sdm660: Add initial Inforce IFC6560 board support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
index 9e14f53b552e..eef4cab8c200 100644
--- a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
+++ b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
@@ -167,7 +167,7 @@ adv7533: hdmi@39 {
 		reg = <0x39>, <0x66>;
 		reg-names = "main", "edid";
 
-		interrupt-parent = <&pm660l_gpios>;
+		interrupt-parent = <&pm660_gpios>;
 		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
 
 		clocks = <&rpmcc RPM_SMD_BB_CLK2>;

-- 
2.47.3