* [PATCH net-next] r8169: clear TX LPI on RTL8168h at link up after phylink conversion
@ 2026-10-20 16:15 Sasha Levin
0 siblings, 0 replies; only message in thread
From: Sasha Levin @ 2026-10-20 16:15 UTC (permalink / raw)
To: Heiner Kallweit, nic_swsd
Cc: Javen Xu, Oleksij Rempel, Dennis Piecha, Andrew Lunn,
David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
netdev, linux-kernel
Commit 3cdeaef1754a ("r8169: disable EEE on RTL8168h/8111h") disables
EEE on RTL_GIGA_MAC_VER_46 with phy_disable_eee() but keeps the version
EEE-capable, so that link up still calls rtl_enable_tx_lpi(tp, false)
and clears the MAC TX-LPI bits (ERI 0x1b0[1:0]). rtl_hw_start_8168h_1()
does not clear them, so a warm reboot from an EEE-active state could
otherwise leave TX-LPI asserted while the PHY no longer negotiates EEE.
In net-next, commit 8a3c76523e44 ("r8169: add support for phylink")
moved link handling to phylink, and rtl_mac_link_up() does not touch
the TX-LPI bits. The merge of net into net-next kept the
phy_disable_eee() quirk and its comment, but not the link-up clear it
depends on. The only remaining clear is rtl_mac_disable_tx_lpi(), which
phylink calls from phylink_deactivate_lpi() only after
phylink_activate_lpi() has enabled LPI. With EEE disabled on this chip
that never happens, so the bits are never cleared and the comment in
r8169_mdio_register() no longer holds.
Clear TX-LPI explicitly in rtl_mac_link_up() for RTL_GIGA_MAC_VER_46.
Fixes: f49defea7668 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net")
Link: https://lore.kernel.org/all/0e0b727e94d046b19ad463e7a1a9fe68@realsil.com.cn/
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
llminus, an LLM-assisted merge conflict resolution tool, found this while
resolving the same net/net-next conflict in our integration tree. Not tested
on RTL8168h hardware, and the warm reboot case was not reproduced.
Javen's proposal in the linked thread, returning no LPI capabilities for this
version, has the same gap: phylink then calls neither LPI op.
drivers/net/ethernet/realtek/r8169_main.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
index 88354e7570f00..cd4ebc654dd0b 100644
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -6428,6 +6428,8 @@ static void rtl_mac_link_up(struct phylink_config *config,
tp->speed = speed;
rtl_link_chg_patch(tp, speed);
+ if (tp->mac_version == RTL_GIGA_MAC_VER_46)
+ rtl_enable_tx_lpi(tp, false);
/*
* Note: This hardware does not support forcing flow control.
--
2.53.0
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2026-10-20 16:15 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-10-20 16:15 [PATCH net-next] r8169: clear TX LPI on RTL8168h at link up after phylink conversion Sasha Levin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®