[PATCH v3 RESEND 0/3] Bluetooth: btmtk: fix ISO data reception

[Chris Lu <chris.lu@mediatek.com>]

Resend due to rebase: the base this series was previously posted against
no longer exists in bluetooth-next's history, which is why it failed to
apply. Rebased onto current bluetooth-next; no content changes from v3.

Two fixes for btmtk_recv_isopkt(), found while debugging LE Audio on
MT7925, plus an update to the ISO data transmission setting. The function
is shared by every MediaTek USB controller that supports ISO data, so none
of this is specific to that part.

Patch 1 drops the zero padding that the ISO interrupt IN endpoint appends
to each transfer instead of parsing it as ISO packets.

Patch 2 bounds Data_Total_Length by hdev->iso_mtu.

Patch 3 updates the mt79xx ISO data transmission setting.

The three hunks do not overlap, so any prefix of the series applies on its
own.

Changes in v3 RESEND:
- Resend due to rebase. No content changes.

Changes in v3:
- Patch 1: instead of dropping a packet solely because Data_Total_Length
  is zero, also confirm that the rest of the transfer is zero-filled
  before treating it as padding.
- Patch 2, 3: unchanged.

Changes in v2:
- Patch 2 reworked and retitled.
- Patch 3 added.

Based on bluetooth-next.

Chris Lu (3):
  Bluetooth: btmtk: drop zero-length ISO packets from endpoint padding
  Bluetooth: btmtk: bound the ISO payload length by the controller's MTU
  Bluetooth: btmtk: derive the firmware ISO setting from
    MTK_ISO_THRESHOLD

 drivers/bluetooth/btmtk.c | 44 ++++++++++++++++++++++++++++++++++-----
 1 file changed, 39 insertions(+), 5 deletions(-)

-- 
2.45.2