[PATCH] arm64: dts: qcom: monaco-ac-evk: Describe the PCIe M.2 Key E connector

[Wei Deng <wei.deng@oss.qualcomm.com>]

The Monaco AC EVK has a PCIe M.2 Mechanical Key E connector to
connect wireless connectivity cards over PCIe and UART interfaces. Hence,
describe the connector node and link it with the PCIe 0 Root Port and
UART2 nodes through graph port/endpoint.

The port/endpoint nodes are defined inline in the board file rather
than as empty anchor nodes in the SoC DTSI, so that
of_graph_is_present() only returns true for boards that have an M.2
Key E connector present, preventing unintended pwrseq probe on boards
with soldered wireless chips (e.g. qcs8300-ride).

The connector's 3.3V supply is described as a fixed always-on regulator
(vreg_wcn_3p3), which is required by the pcie-m2-e-connector binding.

Also add the serial1 = &uart2 alias, which is required for the
Bluetooth serdev device to be enumerated on the UART2 interface.

Signed-off-by: Wei Deng <wei.deng@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/monaco-ac-evk.dts | 60 ++++++++++++++++++++++
 1 file changed, 60 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/monaco-ac-evk.dts b/arch/arm64/boot/dts/qcom/monaco-ac-evk.dts
index 6f3c3ffefe34..3780642fe483 100644
--- a/arch/arm64/boot/dts/qcom/monaco-ac-evk.dts
+++ b/arch/arm64/boot/dts/qcom/monaco-ac-evk.dts
@@ -21,6 +21,7 @@ aliases {
 		ethernet0 = &ethernet0;
 		i2c1 = &i2c1;
 		serial0 = &uart7;
+		serial1 = &uart2;
 		serial2 = &uart6;
 	};
 
@@ -47,6 +48,38 @@ usb2_con_hs_ep: endpoint {
 		};
 	};
 
+	connector-3 {
+		compatible = "pcie-m2-e-connector";
+		vpcie3v3-supply = <&vreg_wcn_3p3>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				m2_e_pcie_ep: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&pcieport0_ep>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				m2_e_uart_ep: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&uart2_ep>;
+				};
+			};
+		};
+	};
+
 	dmic: audio-codec-0 {
 		compatible = "dmic-codec";
 		#sound-dai-cells = <0>;
@@ -91,6 +124,17 @@ usb2_vbus: regulator-usb2-vbus {
 		enable-active-high;
 	};
 
+	vreg_wcn_3p3: regulator-wcn-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	sound {
 		compatible = "qcom,qcs8275-sndcard";
 		model = "MONACO-EVK";
@@ -657,6 +701,12 @@ &pcie1_phy {
 &pcieport0 {
 	reset-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+
+	port {
+		pcieport0_ep: endpoint {
+			remote-endpoint = <&m2_e_pcie_ep>;
+		};
+	};
 };
 
 &pcieport1 {
@@ -875,6 +925,16 @@ expander4_int: expander4-int-state {
 	};
 };
 
+&uart2 {
+	status = "okay";
+
+	port {
+		uart2_ep: endpoint {
+			remote-endpoint = <&m2_e_uart_ep>;
+		};
+	};
+};
+
 &uart6 {
 	status = "okay";
 };
-- 
2.34.1