* [PATCH v2 2/2] ASoC: codecs: add support for Everest ES7202 PDM ADC
2026-10-21 12:45 [PATCH v2 0/2] ASoC: codecs: Add Everest ES7202 support Jun Yan
2026-10-21 12:45 ` [PATCH v2 1/2] dt-bindings: sound: add Everest ES7202 Jun Yan
@ 2026-10-21 12:45 ` Jun Yan
1 sibling, 0 replies; 3+ messages in thread
From: Jun Yan @ 2026-10-21 12:45 UTC (permalink / raw)
To: Liam Girdwood, Mark Brown, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Jaroslav Kysela, Takashi Iwai, Heiko Stuebner
Cc: linux-sound, devicetree, linux-kernel, Jun Yan, linux-arm-kernel,
linux-rockchip
Add support for the Everest ES7202, a 2-channel PDM analog-to-digital
converter controlled over I2C. The device outputs PDM data to the SoC
PDM controller and is configured through registers for supply voltage,
analog front-end and per-channel PGA gain.
Based on the Rockchip BSP driver[1] by Binyuan Lan <lby@rock-chips.com>
(committed by Tao Huang <huangtao@rock-chips.com>), originally written
by David Yang <yangxiaohua@everest-semi.com>.
[1] https://github.com/rockchip-linux/kernel/blob/develop-6.1/sound/soc/codecs/es7202.c
Link: https://archive.org/details/es-7202-ds
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
---
sound/soc/codecs/Kconfig | 10 ++
sound/soc/codecs/Makefile | 2 +
sound/soc/codecs/es7202.c | 367 ++++++++++++++++++++++++++++++++++++++
sound/soc/codecs/es7202.h | 131 ++++++++++++++
4 files changed, 510 insertions(+)
create mode 100644 sound/soc/codecs/es7202.c
create mode 100644 sound/soc/codecs/es7202.h
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index ba59dabeeccd..c1eeebd12cf0 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -1274,6 +1274,16 @@ config SND_SOC_HDMI_CODEC
config SND_SOC_ES7134
tristate "Everest Semi ES7134 CODEC"
+config SND_SOC_ES7202
+ tristate "Everest Semi ES7202 CODEC"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ Enable support for the Everest Semiconductor ES7202, a 2-channel
+ PDM analog-to-digital converter controlled over I2C. The device
+ outputs PDM data to a SoC PDM controller and is configured through
+ registers for supply voltage, analog front-end and PGA gain.
+
config SND_SOC_ES7241
tristate "Everest Semi ES7241 CODEC"
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index 3826f9e4fce8..2a56fad9073a 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -129,6 +129,7 @@ snd-soc-da732x-y := da732x.o
snd-soc-da9055-y := da9055.o
snd-soc-dmic-y := dmic.o
snd-soc-es7134-y := es7134.o
+snd-soc-es7202-y := es7202.o
snd-soc-es7241-y := es7241.o
snd-soc-es83xx-dsm-common-y := es83xx-dsm-common.o
snd-soc-es8311-y := es8311.o
@@ -577,6 +578,7 @@ obj-$(CONFIG_SND_SOC_DA732X) += snd-soc-da732x.o
obj-$(CONFIG_SND_SOC_DA9055) += snd-soc-da9055.o
obj-$(CONFIG_SND_SOC_DMIC) += snd-soc-dmic.o
obj-$(CONFIG_SND_SOC_ES7134) += snd-soc-es7134.o
+obj-$(CONFIG_SND_SOC_ES7202) += snd-soc-es7202.o
obj-$(CONFIG_SND_SOC_ES7241) += snd-soc-es7241.o
obj-$(CONFIG_SND_SOC_ES83XX_DSM_COMMON) += snd-soc-es83xx-dsm-common.o
obj-$(CONFIG_SND_SOC_ES8311) += snd-soc-es8311.o
diff --git a/sound/soc/codecs/es7202.c b/sound/soc/codecs/es7202.c
new file mode 100644
index 000000000000..36fb9f687f24
--- /dev/null
+++ b/sound/soc/codecs/es7202.c
@@ -0,0 +1,367 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 Everest Semiconductor Co Ltd.,
+ * Copyright (C) 2026 Jun Yan <jerrysteve1101@gmail.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/tlv.h>
+#include "es7202.h"
+
+/*
+ * The main supply voltage selects the analog front-end configuration:
+ * below this threshold the device is configured for 1.8 V, otherwise 3.3 V.
+ */
+#define ES7202_SUPPLY_1V8_MAX_UV 1980000
+#define ES7202_SUPPLY_3V3_DEFAULT_UV 3300000
+
+struct es7202_priv {
+ struct regmap *regmap;
+ struct regulator *supply;
+ struct gpio_desc *reset_gpio;
+ unsigned int supply_uv;
+};
+
+static bool es7202_volatile_reg(struct device *dev, unsigned int reg)
+{
+ /* status and device-id registers are read-only, never cached */
+ return reg == ES7202_CHIP_STA ||
+ reg == ES7202_DEV_ID1 ||
+ reg == ES7202_DEV_ID0;
+}
+
+static const struct reg_default es7202_reg_defaults[] = {
+ { ES7202_RESET, 0x10 },
+ { ES7202_SOFT_MODE, 0x00 },
+ { ES7202_CLK_DIV, 0x04 },
+ { ES7202_CLK_EN, 0x00 },
+ { ES7202_T1_VMID, 0x01 },
+ { ES7202_T2_VMID, 0x18 },
+ { ES7202_PDM_INF_CTL, 0x30 },
+ { ES7202_MISC_CTL, 0x02 },
+ { ES7202_ANALOG_EN, 0xff },
+ { ES7202_BIAS_VMID, 0x0c },
+ { ES7202_PGA1_BIAS, 0x55 },
+ { ES7202_PGA2_BIAS, 0x55 },
+ { ES7202_MOD1_BIAS, 0x8c },
+ { ES7202_MOD2_BIAS, 0x33 },
+ { ES7202_VREFP_BIAS, 0x33 },
+ { ES7202_VMMOD_BIAS, 0x33 },
+ { ES7202_MODS_BIAS, 0x44 },
+ { ES7202_ANALOG_LP1, 0x00 },
+ { ES7202_ANALOG_LP2, 0x00 },
+ { ES7202_ANALOG_MISC1, 0x00 },
+ { ES7202_ANALOG_MISC2, 0xf8 },
+ { ES7202_PGA1, 0x18 },
+ { ES7202_PGA2, 0x18 },
+};
+
+static const struct regmap_config es7202_regmap = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = ES7202_DEV_ID0,
+ .reg_defaults = es7202_reg_defaults,
+ .num_reg_defaults = ARRAY_SIZE(es7202_reg_defaults),
+ .volatile_reg = es7202_volatile_reg,
+ .cache_type = REGCACHE_MAPLE,
+};
+
+/*
+ * PGA gain per the datasheet: code 0 is 0 dB, codes 1..10 step +3 dB from
+ * 2.25 dB, and codes 11 and 12 are 30.75 dB and 32.25 dB respectively. As
+ * the steps are not uniform, a linear TLV (the vendor driver's
+ * DECLARE_TLV_DB_SCALE(mic_boost_tlv, 0, 300, 0)) would misreport the gain,
+ * so use a piecewise range matching the datasheet instead.
+ */
+static const DECLARE_TLV_DB_RANGE(mic_boost_tlv,
+ 0, 0, TLV_DB_SCALE_ITEM(0, 0, 0),
+ 1, 10, TLV_DB_SCALE_ITEM(225, 300, 0),
+ 11, 11, TLV_DB_SCALE_ITEM(3075, 0, 0),
+ 12, 12, TLV_DB_SCALE_ITEM(3225, 0, 0),
+);
+
+static const struct snd_kcontrol_new es7202_controls[] = {
+ SOC_SINGLE_TLV("PGA1 Capture Volume", ES7202_PGA1, 0, 0x0c, 0,
+ mic_boost_tlv),
+ SOC_SINGLE_TLV("PGA2 Capture Volume", ES7202_PGA2, 0, 0x0c, 0,
+ mic_boost_tlv),
+};
+
+static const struct snd_soc_dapm_widget es7202_dapm_widgets[] = {
+ SND_SOC_DAPM_INPUT("MIC1"),
+ SND_SOC_DAPM_INPUT("MIC2"),
+ SND_SOC_DAPM_ADC("ADC", "Capture", SND_SOC_NOPM, 0, 0),
+};
+
+static const struct snd_soc_dapm_route es7202_dapm_routes[] = {
+ { "ADC", NULL, "MIC1" },
+ { "ADC", NULL, "MIC2" },
+};
+
+static int es7202_mute_pdm(struct es7202_priv *es7202, bool mute)
+{
+ return regmap_update_bits(es7202->regmap, ES7202_PDM_INF_CTL,
+ ES7202_PDM_INF_CTL_MUTE,
+ mute ? ES7202_PDM_INF_CTL_MUTE : 0);
+}
+
+static int es7202_hw_init(struct es7202_priv *es7202)
+{
+ struct regmap *regmap = es7202->regmap;
+ bool is_1v8 = es7202->supply_uv > 0 &&
+ es7202->supply_uv <= ES7202_SUPPLY_1V8_MAX_UV;
+ /*
+ * Power-up sequence from the vendor driver.
+ * The analog front-end is configured for the actual supply voltage
+ * (1.8 V vs 3.3 V) and the analog blocks are ramped out of
+ * power-down in stages.
+ */
+ const struct reg_sequence init_seq[] = {
+ { ES7202_SOFT_MODE, ES7202_MODE_SOFT_MODE_SEL },
+ { ES7202_ANALOG_MISC1, ES7202_ANALOG_MISC1_OFFSETSEL1 |
+ (is_1v8 ? 0 : ES7202_ANALOG_MISC1_SUPPLYSEL) },
+
+ /* analog on, rest powered down */
+ { ES7202_ANALOG_EN, ES7202_ANALOG_EN_PDN_ADCVREFGEN |
+ ES7202_ANALOG_EN_MODTOP1_RST |
+ ES7202_ANALOG_EN_MODTOP2_RST |
+ ES7202_ANALOG_EN_PDN_MOD1 |
+ ES7202_ANALOG_EN_PDN_MOD2 |
+ ES7202_ANALOG_EN_PDN_PGA1 |
+ ES7202_ANALOG_EN_PDN_PGA2 },
+
+ { ES7202_BIAS_VMID, FIELD_PREP(ES7202_BIAS_ADCBIAS_SWH1, 3) |
+ ES7202_BIAS_ENDITHER |
+ FIELD_PREP(ES7202_BIAS_VMIDSEL, 3) },
+
+ /* VREFGEN on; 3.3 V also drops MODTOP reset */
+ { ES7202_ANALOG_EN, is_1v8 ?
+ (ES7202_ANALOG_EN_MODTOP1_RST |
+ ES7202_ANALOG_EN_MODTOP2_RST |
+ ES7202_ANALOG_EN_PDN_MOD1 |
+ ES7202_ANALOG_EN_PDN_MOD2 |
+ ES7202_ANALOG_EN_PDN_PGA1 |
+ ES7202_ANALOG_EN_PDN_PGA2) :
+ (ES7202_ANALOG_EN_PDN_MOD1 |
+ ES7202_ANALOG_EN_PDN_MOD2 |
+ ES7202_ANALOG_EN_PDN_PGA1 |
+ ES7202_ANALOG_EN_PDN_PGA2) },
+
+ { ES7202_ANALOG_EN, 0 },
+ { ES7202_MOD1_BIAS, FIELD_PREP(ES7202_MOD1_BIAS_SW0, 5) |
+ FIELD_PREP(ES7202_MOD1_BIAS_SW1, 8) },
+ { ES7202_CLK_DIV, FIELD_PREP(ES7202_CLK_DIV_MCLK_DIV, 1) },
+ { ES7202_T2_VMID, 0x01 },
+ { ES7202_MISC_CTL, ES7202_MISC_DSM_DITHER_ON },
+ { ES7202_RESET, ES7202_RESET_CSM_ON },
+ { ES7202_CLK_EN, ES7202_CLK_ANA_CLK_ON | ES7202_CLK_MCLK_ON },
+ { ES7202_BIAS_VMID, FIELD_PREP(ES7202_BIAS_ADCBIAS_SWH1, 3) |
+ ES7202_BIAS_ENDITHER |
+ FIELD_PREP(ES7202_BIAS_VMIDSEL, 2) },
+
+ /* keep the PDM outputs muted until a capture stream starts */
+ { ES7202_PDM_INF_CTL, ES7202_PDM_NEG_DATA_VALID |
+ ES7202_PDM_POS_DATA_VALID |
+ ES7202_PDM_INF_CTL_MUTE },
+ };
+ return regmap_multi_reg_write(regmap, init_seq, ARRAY_SIZE(init_seq));
+}
+
+static int es7202_mute_stream(struct snd_soc_dai *dai, int mute, int stream)
+{
+ struct snd_soc_component *component = dai->component;
+ struct es7202_priv *es7202 = snd_soc_component_get_drvdata(component);
+
+ if (stream == SNDRV_PCM_STREAM_PLAYBACK)
+ return 0;
+
+ return es7202_mute_pdm(es7202, mute);
+}
+
+static const struct snd_soc_dai_ops es7202_dai_ops = {
+ .mute_stream = es7202_mute_stream,
+};
+
+static struct snd_soc_dai_driver es7202_dai = {
+ .name = "es7202-hifi",
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_8000_96000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ },
+ .ops = &es7202_dai_ops,
+};
+
+static int es7202_suspend(struct snd_soc_component *component)
+{
+ struct es7202_priv *es7202 = snd_soc_component_get_drvdata(component);
+
+ return es7202_mute_pdm(es7202, true);
+}
+
+static int es7202_resume(struct snd_soc_component *component)
+{
+ struct es7202_priv *es7202 = snd_soc_component_get_drvdata(component);
+ int ret;
+
+ /* re-run the power-up sequence to bring the analog front-end back up */
+ ret = es7202_hw_init(es7202);
+ if (ret)
+ return ret;
+
+ regcache_mark_dirty(es7202->regmap);
+ return regcache_sync(es7202->regmap);
+}
+
+static const struct snd_soc_component_driver es7202_component_driver = {
+ .controls = es7202_controls,
+ .num_controls = ARRAY_SIZE(es7202_controls),
+ .dapm_widgets = es7202_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(es7202_dapm_widgets),
+ .dapm_routes = es7202_dapm_routes,
+ .num_dapm_routes = ARRAY_SIZE(es7202_dapm_routes),
+ .suspend = es7202_suspend,
+ .resume = es7202_resume,
+ .idle_bias_on = 1,
+ .endianness = 1,
+};
+
+static void es7202_disable_supply(void *data)
+{
+ regulator_disable(data);
+}
+
+static int es7202_i2c_probe(struct i2c_client *i2c)
+{
+ struct device *dev = &i2c->dev;
+ struct es7202_priv *es7202;
+ unsigned int id1, id0, device_id;
+ int ret;
+ int voltage;
+
+ es7202 = devm_kzalloc(dev, sizeof(*es7202), GFP_KERNEL);
+ if (!es7202)
+ return -ENOMEM;
+
+ i2c_set_clientdata(i2c, es7202);
+
+ es7202->regmap = devm_regmap_init_i2c(i2c, &es7202_regmap);
+ if (IS_ERR(es7202->regmap))
+ return dev_err_probe(dev, PTR_ERR(es7202->regmap),
+ "failed to init regmap\n");
+
+ es7202->reset_gpio = devm_gpiod_get_optional(dev, "reset",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(es7202->reset_gpio))
+ return dev_err_probe(dev, PTR_ERR(es7202->reset_gpio),
+ "failed to get reset gpio\n");
+
+ es7202->supply = devm_regulator_get_optional(dev, "vdd");
+ if (IS_ERR(es7202->supply)) {
+ if (PTR_ERR(es7202->supply) != -ENODEV)
+ return dev_err_probe(dev, PTR_ERR(es7202->supply),
+ "failed to get supply\n");
+
+ es7202->supply = NULL;
+ es7202->supply_uv = ES7202_SUPPLY_3V3_DEFAULT_UV;
+ } else {
+ ret = regulator_enable(es7202->supply);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "failed to enable supply\n");
+
+ ret = devm_add_action_or_reset(dev, es7202_disable_supply,
+ es7202->supply);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "failed to add supply disable action\n");
+
+ voltage = regulator_get_voltage(es7202->supply);
+ if (voltage < 0)
+ es7202->supply_uv = ES7202_SUPPLY_3V3_DEFAULT_UV;
+ else
+ es7202->supply_uv = voltage;
+ }
+
+ /* take the device out of reset */
+ gpiod_set_value_cansleep(es7202->reset_gpio, 0);
+ usleep_range(1000, 2000);
+
+ /* verify the chip is present by reading its device id */
+ ret = regmap_read(es7202->regmap, ES7202_DEV_ID1, &id1);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to read device id\n");
+ ret = regmap_read(es7202->regmap, ES7202_DEV_ID0, &id0);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to read device id\n");
+
+ device_id = (id1 << 8) | id0;
+ if (device_id != ES7202_DEVICE_ID)
+ return dev_err_probe(dev, -ENODEV,
+ "unexpected device id 0x%04x, expected 0x%04x\n",
+ device_id, ES7202_DEVICE_ID);
+
+ ret = es7202_hw_init(es7202);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to init device\n");
+
+ return devm_snd_soc_register_component(dev, &es7202_component_driver,
+ &es7202_dai, 1);
+}
+
+static void es7202_i2c_remove(struct i2c_client *i2c)
+{
+ struct es7202_priv *es7202 = i2c_get_clientdata(i2c);
+
+ es7202_mute_pdm(es7202, true);
+}
+
+static void es7202_i2c_shutdown(struct i2c_client *i2c)
+{
+ struct es7202_priv *es7202 = i2c_get_clientdata(i2c);
+
+ es7202_mute_pdm(es7202, true);
+}
+
+static const struct of_device_id es7202_of_match[] = {
+ { .compatible = "everest,es7202" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, es7202_of_match);
+
+static const struct i2c_device_id es7202_i2c_id[] = {
+ { "es7202" },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, es7202_i2c_id);
+
+static struct i2c_driver es7202_i2c_driver = {
+ .driver = {
+ .name = "es7202",
+ .of_match_table = es7202_of_match,
+ },
+ .probe = es7202_i2c_probe,
+ .remove = es7202_i2c_remove,
+ .shutdown = es7202_i2c_shutdown,
+ .id_table = es7202_i2c_id,
+};
+module_i2c_driver(es7202_i2c_driver);
+
+MODULE_DESCRIPTION("Everest Semi ES7202 PDM ADC ALSA SoC Codec Driver");
+MODULE_AUTHOR("David Yang <yangxiaohua@everest-semi.com>");
+MODULE_AUTHOR("Jun Yan <jerrysteve1101@gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/es7202.h b/sound/soc/codecs/es7202.h
new file mode 100644
index 000000000000..f268722febcc
--- /dev/null
+++ b/sound/soc/codecs/es7202.h
@@ -0,0 +1,131 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2020 Everest Semiconductor Co Ltd.,
+ * Copyright (C) 2026 Jun Yan <jerrysteve1101@gmail.com>
+ */
+
+#ifndef _ES7202_H
+#define _ES7202_H
+
+#include <linux/bits.h>
+
+/* Register addresses */
+#define ES7202_RESET 0x00
+#define ES7202_SOFT_MODE 0x01
+#define ES7202_CLK_DIV 0x02
+#define ES7202_CLK_EN 0x03
+#define ES7202_T1_VMID 0x04
+#define ES7202_T2_VMID 0x05
+#define ES7202_CHIP_STA 0x06
+#define ES7202_PDM_INF_CTL 0x07
+#define ES7202_MISC_CTL 0x08
+#define ES7202_ANALOG_EN 0x10
+#define ES7202_BIAS_VMID 0x11
+#define ES7202_PGA1_BIAS 0x12
+#define ES7202_PGA2_BIAS 0x13
+#define ES7202_MOD1_BIAS 0x14
+#define ES7202_MOD2_BIAS 0x15
+#define ES7202_VREFP_BIAS 0x16
+#define ES7202_VMMOD_BIAS 0x17
+#define ES7202_MODS_BIAS 0x18
+#define ES7202_ANALOG_LP1 0x19
+#define ES7202_ANALOG_LP2 0x1a
+#define ES7202_ANALOG_MISC1 0x1b
+#define ES7202_ANALOG_MISC2 0x1c
+#define ES7202_PGA1 0x1d
+#define ES7202_PGA2 0x1e
+#define ES7202_DEV_ID1 0xfd
+#define ES7202_DEV_ID0 0xfe
+
+#define ES7202_DEVICE_ID 0x7201
+
+#define ES7202_RESET_RST_REGS BIT(5)
+#define ES7202_RESET_RST_DIG BIT(4)
+#define ES7202_RESET_SEQ_DIS BIT(1)
+#define ES7202_RESET_CSM_ON BIT(0)
+
+#define ES7202_MODE_SOFT_MODE_SEL BIT(0)
+
+#define ES7202_CLK_DIV_MCLK_DIV GENMASK(3, 0) /* 0/1 = /16 ... 15 = /240 */
+
+#define ES7202_CLK_MCLK_INVERT BIT(2)
+#define ES7202_CLK_ANA_CLK_ON BIT(1)
+#define ES7202_CLK_MCLK_ON BIT(0)
+
+#define ES7202_CHIP_STA_CSM_STATE GENMASK(5, 4)
+#define ES7202_CHIP_STA_FORCE_CSM GENMASK(2, 0)
+
+#define ES7202_PDM_NEG_DATA_VALID BIT(5)
+#define ES7202_PDM_POS_DATA_VALID BIT(4)
+#define ES7202_PDM_CHN_CROSS BIT(3)
+#define ES7202_PDM_IF_DLY BIT(2)
+#define ES7202_PDM_DATA2_MUTE BIT(1)
+#define ES7202_PDM_DATA1_MUTE BIT(0)
+#define ES7202_PDM_INF_CTL_MUTE (ES7202_PDM_DATA2_MUTE | \
+ ES7202_PDM_DATA1_MUTE)
+
+#define ES7202_MISC_CLKDET_RST_DIS BIT(2)
+#define ES7202_MISC_DSM_DITHER_ON BIT(1)
+#define ES7202_MISC_PDN_CLKDET BIT(0)
+
+#define ES7202_ANALOG_EN_PDN_ANA BIT(7)
+#define ES7202_ANALOG_EN_PDN_ADCVREFGEN BIT(6)
+#define ES7202_ANALOG_EN_MODTOP1_RST BIT(5)
+#define ES7202_ANALOG_EN_MODTOP2_RST BIT(4)
+#define ES7202_ANALOG_EN_PDN_MOD1 BIT(3)
+#define ES7202_ANALOG_EN_PDN_MOD2 BIT(2)
+#define ES7202_ANALOG_EN_PDN_PGA1 BIT(1)
+#define ES7202_ANALOG_EN_PDN_PGA2 BIT(0)
+
+#define ES7202_BIAS_ADCBIAS_SWH0 GENMASK(7, 6)
+#define ES7202_BIAS_ENDITHER BIT(5)
+#define ES7202_BIAS_ADCBIAS_SWH1 GENMASK(3, 2)
+#define ES7202_BIAS_VMIDSEL GENMASK(1, 0) /* 0 = off, 1 = 50k, 2 = 500k, 3 = 5k */
+
+/* bias levels 0x12-0x18 (SW0 for 1.8 V, SW1 for 3.3 V) */
+#define ES7202_PGA1_BIAS_SW0 GENMASK(7, 4)
+#define ES7202_PGA1_BIAS_SW1 GENMASK(3, 0)
+#define ES7202_PGA2_BIAS_SW0 GENMASK(7, 4)
+#define ES7202_PGA2_BIAS_SW1 GENMASK(3, 0)
+#define ES7202_MOD1_BIAS_SW0 GENMASK(7, 4)
+#define ES7202_MOD1_BIAS_SW1 GENMASK(3, 0)
+#define ES7202_MOD2_BIAS_SW0 GENMASK(7, 4)
+#define ES7202_MOD2_BIAS_SW1 GENMASK(3, 0)
+#define ES7202_VREFP_BIAS_SW0 GENMASK(7, 4)
+#define ES7202_VREFP_BIAS_SW1 GENMASK(3, 0)
+#define ES7202_VMMOD_BIAS_SW0 GENMASK(7, 4)
+#define ES7202_VMMOD_BIAS_SW1 GENMASK(3, 0)
+#define ES7202_MODS_BIAS_SW0 GENMASK(7, 4)
+#define ES7202_MODS_BIAS_SW1 GENMASK(3, 0)
+
+#define ES7202_LP1_LP_VRP BIT(7)
+#define ES7202_LP1_LP_VRPOUT BIT(6)
+#define ES7202_LP1_LP_VMMOD1 BIT(5)
+#define ES7202_LP1_LP_VMMOD2 BIT(4)
+#define ES7202_LP1_LP_MODS1 BIT(3)
+#define ES7202_LP1_LP_MODS2 BIT(2)
+#define ES7202_LP1_LP_MODI1 BIT(1)
+#define ES7202_LP1_LP_MODI2 BIT(0)
+
+#define ES7202_LP2_LP_PGA1 BIT(5)
+#define ES7202_LP2_LP_PGA2 BIT(4)
+#define ES7202_LP2_PDN_DETCT BIT(3)
+
+#define ES7202_ANALOG_MISC1_OFFSETSEL1 BIT(6)
+#define ES7202_ANALOG_MISC1_OFFSETSEL0 BIT(5)
+#define ES7202_ANALOG_MISC1_SUPPLYSEL BIT(4) /* 0 = 1.8 V, 1 = 3.3 V */
+#define ES7202_ANALOG_MISC1_DITHERSEL GENMASK(2, 0)
+
+#define ES7202_ANALOG_MISC2_VX2OFF_SW0 BIT(7)
+#define ES7202_ANALOG_MISC2_VX1SEL_SW0 BIT(6)
+#define ES7202_ANALOG_MISC2_VMIDLOW_SW0 GENMASK(5, 4)
+#define ES7202_ANALOG_MISC2_VX2OFF_SW1 BIT(3)
+#define ES7202_ANALOG_MISC2_VX1SEL_SW1 BIT(2)
+#define ES7202_ANALOG_MISC2_VMIDLOW_SW1 GENMASK(1, 0)
+
+#define ES7202_PGA_SELMIC1 BIT(4)
+#define ES7202_PGA_MIC1_GAIN GENMASK(3, 0)
+#define ES7202_PGA_SELMIC2 BIT(4)
+#define ES7202_PGA_MIC2_GAIN GENMASK(3, 0)
+
+#endif
--
2.56.0
^ permalink raw reply [flat|nested] 3+ messages in thread