[PATCH 0/6] Fix SATA support for NSP SoCs

[Florian Fainelli <florian.fainelli@broadcom.com>]

This patch series fixes SATA on the Northstar Plus (BCM58xxx/8831x)
which was broken due to a number of things:

- the SATA PHY assumed separate PCB windows when a shared one is used
  for this generation of SoCs
- the clock/reset (IDM) was not being configured by the driver which
  meant that depending upon what the boot loader did, or did not, we
  could have had the AHCI controller still in reset by then
- on some reference boards, the AHCI controller is not DMA coherent,
  assuming so leads to all sorts of timeouts, data corruption, etc.

Since this touches several subsystems: DT, PHY, AHCI and DTS, I would be
keen on having Damien merge all of those via his tree if acceptable by
the DT and PHY maintainers, I am OK either way for Broadcom SoC.

Thanks!

Florian Fainelli (6):
  phy: broadcom: brcm-sata: Keep NSP ports in the shared PCB window
  dt-bindings: ata: sata-brcm: Describe the NSP IDM registers
  ata: ahci_brcm: Initialize the NSP interface clock and reset
  ARM: dts: broadcom: Add the NSP SATA IDM registers
  ARM: dts: broadcom: Use noncoherent SATA DMA on BCM958625HR
  ARM: dts: broadcom: Enable SATA on BCM958625HR

 .../bindings/ata/brcm,sata-brcm.yaml          | 20 ++++++++++-
 arch/arm/boot/dts/broadcom/bcm-nsp.dtsi       |  7 ++--
 arch/arm/boot/dts/broadcom/bcm958625hr.dts    |  5 +++
 drivers/ata/ahci_brcm.c                       | 34 +++++++++++++++++++
 drivers/phy/broadcom/phy-brcm-sata.c          |  5 +--
 5 files changed, 65 insertions(+), 6 deletions(-)

-- 
2.53.0