Re: [PATCH 0/6] Fix SATA support for NSP SoCs

[Florian Fainelli <florian.fainelli@broadcom.com>]

On 10/21/26 09:55, Florian Fainelli wrote:
> This patch series fixes SATA on the Northstar Plus (BCM58xxx/8831x)
> which was broken due to a number of things:
> 
> - the SATA PHY assumed separate PCB windows when a shared one is used
>    for this generation of SoCs
> - the clock/reset (IDM) was not being configured by the driver which
>    meant that depending upon what the boot loader did, or did not, we
>    could have had the AHCI controller still in reset by then
> - on some reference boards, the AHCI controller is not DMA coherent,
>    assuming so leads to all sorts of timeouts, data corruption, etc.
> 
> Since this touches several subsystems: DT, PHY, AHCI and DTS, I would be
> keen on having Damien merge all of those via his tree if acceptable by
> the DT and PHY maintainers, I am OK either way for Broadcom SoC.

Argh, looks like I submitted patches 5 and 6 twice after I had 
re-ordered them, the correct order is in the cover letter:

ARM: dts: broadcom: Use noncoherent SATA DMA on BCM958625HR
ARM: dts: broadcom: Enable SATA on BCM958625HR

Will wait for feedback and resubmit if necessary. Thanks!
-- 
Florian