mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Karthik S <karthik.s@oss.qualcomm.com>
To: Srinivas Kandagatla <srini@kernel.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konradybcio@kernel.org>,
	Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: linux-sound@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Karthik S <karthik.s@oss.qualcomm.com>
Subject: [PATCH v1 0/5] ASoC: qcom: Add Shikra IQS LT9611UXD EVK audio support
Date: Thu, 22 Oct 2026 15:13:08 +0530	[thread overview]
Message-ID: <20261022094313.1074873-1-karthik.s@oss.qualcomm.com> (raw)

This series adds audio support for the Shikra IQS EVK board variant
that uses the LT9611UXD HDMI bridge as an I2S audio codec instead of
the MAX98091 codec used on the base Shikra IQS EVK.

The Shikra IQS platform uses modem-DSP based audio processing. The
base IQS variant uses a third-party MAX98091 codec. This series adds
support for a board subtype where the LT9611UXD HDMI bridge takes the
place of the MAX98091 on the primary I2S bus, allowing HDMI audio
output without the on-board codec.

Changes included in this series:
- Patch 1/5: Add the shikra-iqs-lt9611uxd-sndcard compatible to the
  DT binding
- Patch 2/5: Add the DT overlay for the LT9611UXD EVK variant, with a
  label fix to shikra-iqs-evk.dts and Makefile entry
- Patch 3/5: Extend q6apm frontend DAI to support 32-bit sample format
- Patch 4/5: Conditionally skip S16_LE fixup for MI2S and DisplayPort
  DAIs so they can negotiate format freely
- Patch 5/5: Add shikra-iqs-lt9611uxd-evk compatible to the sc8280xp
  machine driver

Dependencies:
- https://lore.kernel.org/all/20260910-shikra-machine-v2-v2-0-9bf6bad589d8@oss.qualcomm.com/
  Shikra IQS base machine driver support (precon)
- https://lore.kernel.org/all/20260910231642.1794948-9-mohammad.rafi.shaik@oss.qualcomm.com/
  LT9611UXD DAI/codec driver support

Signed-off-by: Karthik S <karthik.s@oss.qualcomm.com>
---
Karthik S (5):
  ASoC: dt-bindings: qcom,sm8250: Add shikra-iqs-lt9611uxd-evk sound card
  arm64: dts: qcom: shikra-iqs: Add LT9611UXD HDMI audio overlay
  ASoC: qcom: q6apm-dai: Add 32-bit sample format support
  ASoC: qcom: sc8280xp: Conditionally set S16_LE format in hw_params fixup
  ASoC: qcom: sc8280xp: Add shikra-iqs-lt9611uxd-evk compatible support

 .../devicetree/bindings/sound/qcom,sm8250.yaml     | 43 ++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/Makefile                  |  4 ++
 arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts        |  2 +-
 .../boot/dts/qcom/shikra-iqs-lt9611uxd-evk.dtso    | 36 ++++++++++++++++++
 sound/soc/qcom/qdsp6/q6apm-dai.c                   |  9 ++++-
 sound/soc/qcom/sc8280xp.c                          | 22 ++++++++++-
 6 files changed, 112 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm64/boot/dts/qcom/shikra-iqs-lt9611uxd-evk.dtso

--
2.34.1


             reply	other threads:[~2026-10-22 10:03 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-22  9:43 Karthik S [this message]
2026-10-22  9:43 ` [PATCH v1 1/5] ASoC: dt-bindings: qcom,sm8250: Add shikra-iqs-lt9611uxd-evk sound card Karthik S
2026-10-22 16:17   ` Ajay Kumar Nandam
2026-10-22  9:43 ` [PATCH v1 2/5] arm64: dts: qcom: shikra-iqs: Add LT9611UXD HDMI audio overlay Karthik S
2026-10-22 10:31   ` Dmitry Baryshkov
2026-10-22  9:43 ` [PATCH v1 3/5] ASoC: qcom: q6apm-dai: Add 32-bit sample format support Karthik S
2026-10-22  9:43 ` [PATCH v1 4/5] ASoC: qcom: sc8280xp: Conditionally set S16_LE format in hw_params fixup Karthik S
2026-10-22  9:43 ` [PATCH v1 5/5] ASoC: qcom: sc8280xp: Add shikra-iqs-lt9611uxd-evk compatible support Karthik S
2026-10-22 16:07   ` Ajay Kumar Nandam
2026-10-22 13:02 ` [PATCH v1 0/5] ASoC: qcom: Add Shikra IQS LT9611UXD EVK audio support Mark Brown
  -- strict thread matches above, loose matches on Subject: below --
2026-10-22  7:42 Karthik S

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261022094313.1074873-1-karthik.s@oss.qualcomm.com \
    --to=karthik.s@oss.qualcomm.com \
    --cc=andersson@kernel.org \
    --cc=broonie@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=konradybcio@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=robh@kernel.org \
    --cc=srini@kernel.org \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®