mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH v2] iio: adc: xilinx-ams: fix out-of-bounds accesses when parsing channels
@ 2026-10-22 14:06 Arnav Kapoor
  0 siblings, 0 replies; only message in thread
From: Arnav Kapoor @ 2026-10-22 14:06 UTC (permalink / raw)
  To: Sai Krishna Potthuri, Conall O'Griofa, Jonathan Cameron
  Cc: David Lechner, Nuno Sá,
	Andy Shevchenko, Michal Simek, Andy Shevchenko, stable,
	linux-arm-kernel, linux-iio, linux-kernel

ams_parse_firmware() allocates room for ARRAY_SIZE(ams_ps_channels) +
ARRAY_SIZE(ams_pl_channels) + ARRAY_SIZE(ams_ctrl_channels) = 51
channel specs and lets ams_init_module() fill them for the AMS node and
each of its children, without telling it how much room is left.

For the PL-SYSMON node, ams_get_ext_chan() appends one channel per
"channel@N" child after the 10 fixed PL channels. The binding allows
reg values 20..50, so a PL node can have up to 31 such children, i.e.
up to 41 PL channels, while only 31 are budgeted for it. Together with
the 13 PS and 7 AMS control channels, this writes past the end of the
buffer. Since the modules are filled in device tree order, the fixed
channel blocks copied after the PL node can overflow as well.

ams_get_ext_chan() also only checks the upper bound of reg. ext_chan is
unsigned, so a reg below 20 makes it wrap and ams_pl_channels[] is read
far out of bounds.

Pass the remaining capacity down to ams_init_module() and
ams_get_ext_chan() and fail with -ENOSPC when a module does not fit,
instead of writing past the buffer. Also reject reg values below 20, as
the binding requires.

Fixes: d5c70627a794 ("iio: adc: Add Xilinx AMS driver")
Cc: stable@vger.kernel.org
Assisted-by: LLM
Signed-off-by: Arnav Kapoor <kapoorarnav43@gmail.com>
---
Changes in v2:
- Fix the truncated subject line (Andy)
- Drop the paragraph about an earlier report, I could not find that
  thread again to reference it properly
- Pass the remaining capacity as unsigned int and drop the casts (Andy)
- Keep the ams_get_ext_chan() call on one line (Andy)
- Rebase on fixes-togreg
- Drop the bouncing @xilinx.com and @huawei.com addresses from Cc

v1: https://lore.kernel.org/all/20261021225356.625288-1-kapoorarnav43@gmail.com/

Compile-tested only (W=1); I don't have ZynqMP hardware.

 drivers/iio/adc/xilinx-ams.c | 54 ++++++++++++++++++++++++++++--------
 1 file changed, 43 insertions(+), 11 deletions(-)

diff --git a/drivers/iio/adc/xilinx-ams.c b/drivers/iio/adc/xilinx-ams.c
index 158e6133abf5..7f0f7778d6aa 100644
--- a/drivers/iio/adc/xilinx-ams.c
+++ b/drivers/iio/adc/xilinx-ams.c
@@ -144,7 +144,14 @@
 #define AMS_PL_CSTS_ACCESS_MASK		BIT(1)
 
 #define AMS_PL_MAX_FIXED_CHANNEL	10
-#define AMS_PL_MAX_EXT_CHANNEL		20
+/*
+ * The external PL channels are addressed by their channel number. The
+ * binding allows the range from AMS_PL_EXT_CHANNEL_MIN to
+ * AMS_PL_EXT_CHANNEL_MAX. AMS_PL_EXT_CHANNEL_MIN maps onto the first
+ * ams_pl_channels[] entry, AMS_PL_EXT_CHANNEL_MAX onto the last one.
+ */
+#define AMS_PL_EXT_CHANNEL_MIN		20
+#define AMS_PL_EXT_CHANNEL_MAX		50
 
 #define AMS_INIT_POLL_TIME_US		200
 #define AMS_INIT_TIMEOUT_US		10000
@@ -1142,20 +1149,31 @@ static const struct iio_chan_spec ams_ctrl_channels[] = {
 };
 
 static int ams_get_ext_chan(struct fwnode_handle *chan_node,
-			    struct iio_chan_spec *channels, int num_channels)
+			    struct iio_chan_spec *channels, int num_channels,
+			    unsigned int max_channels)
 {
 	struct iio_chan_spec *chan;
-	struct fwnode_handle *child;
 	unsigned int reg, ext_chan;
 	int ret;
 
-	fwnode_for_each_child_node(chan_node, child) {
+	fwnode_for_each_child_node_scoped(chan_node, child) {
 		ret = fwnode_property_read_u32(child, "reg", &reg);
-		if (ret || reg > AMS_PL_MAX_EXT_CHANNEL + 30)
+		if (ret)
+			continue;
+
+		/*
+		 * Anything outside of the range of channel numbers allowed
+		 * by the binding is not a valid channel.
+		 */
+		if (reg < AMS_PL_EXT_CHANNEL_MIN ||
+		    reg > AMS_PL_EXT_CHANNEL_MAX)
 			continue;
 
+		if (num_channels >= max_channels)
+			return -ENOSPC;
+
 		chan = &channels[num_channels];
-		ext_chan = reg + AMS_PL_MAX_FIXED_CHANNEL - 30;
+		ext_chan = reg - AMS_PL_EXT_CHANNEL_MIN;
 		memcpy(chan, &ams_pl_channels[ext_chan], sizeof(*channels));
 
 		if (fwnode_property_read_bool(child, "xlnx,bipolar"))
@@ -1183,7 +1201,8 @@ static void ams_iounmap_pl(void *data)
 
 static int ams_init_module(struct iio_dev *indio_dev,
 			   struct fwnode_handle *fwnode,
-			   struct iio_chan_spec *channels)
+			   struct iio_chan_spec *channels,
+			   unsigned int max_channels)
 {
 	struct device *dev = indio_dev->dev.parent;
 	struct ams *ams = iio_priv(indio_dev);
@@ -1191,6 +1210,9 @@ static int ams_init_module(struct iio_dev *indio_dev,
 	int ret;
 
 	if (fwnode_device_is_compatible(fwnode, "xlnx,zynqmp-ams-ps")) {
+		if (max_channels < ARRAY_SIZE(ams_ps_channels))
+			return -ENOSPC;
+
 		ams->ps_base = fwnode_iomap(fwnode, 0);
 		if (!ams->ps_base)
 			return -ENXIO;
@@ -1202,6 +1224,9 @@ static int ams_init_module(struct iio_dev *indio_dev,
 		memcpy(channels, ams_ps_channels, sizeof(ams_ps_channels));
 		num_channels = ARRAY_SIZE(ams_ps_channels);
 	} else if (fwnode_device_is_compatible(fwnode, "xlnx,zynqmp-ams-pl")) {
+		if (max_channels < AMS_PL_MAX_FIXED_CHANNEL)
+			return -ENOSPC;
+
 		ams->pl_base = fwnode_iomap(fwnode, 0);
 		if (!ams->pl_base)
 			return -ENXIO;
@@ -1213,9 +1238,14 @@ static int ams_init_module(struct iio_dev *indio_dev,
 		/* Copy only first 10 fix channels */
 		memcpy(channels, ams_pl_channels, AMS_PL_MAX_FIXED_CHANNEL * sizeof(*channels));
 		num_channels += AMS_PL_MAX_FIXED_CHANNEL;
-		num_channels = ams_get_ext_chan(fwnode, channels,
-						num_channels);
+		ret = ams_get_ext_chan(fwnode, channels, num_channels, max_channels);
+		if (ret < 0)
+			return ret;
+		num_channels = ret;
 	} else if (fwnode_device_is_compatible(fwnode, "xlnx,zynqmp-ams")) {
+		if (max_channels < ARRAY_SIZE(ams_ctrl_channels))
+			return -ENOSPC;
+
 		/* add AMS channels to iio device channels */
 		memcpy(channels, ams_ctrl_channels, sizeof(ams_ctrl_channels));
 		num_channels += ARRAY_SIZE(ams_ctrl_channels);
@@ -1245,7 +1275,7 @@ static int ams_parse_firmware(struct iio_dev *indio_dev)
 		return -ENOMEM;
 
 	if (fwnode_device_is_available(fwnode)) {
-		ret = ams_init_module(indio_dev, fwnode, ams_channels);
+		ret = ams_init_module(indio_dev, fwnode, ams_channels, ams_size);
 		if (ret < 0)
 			return ret;
 
@@ -1253,7 +1283,9 @@ static int ams_parse_firmware(struct iio_dev *indio_dev)
 	}
 
 	device_for_each_child_node_scoped(dev, child) {
-		ret = ams_init_module(indio_dev, child, ams_channels + num_channels);
+		ret = ams_init_module(indio_dev, child,
+				      ams_channels + num_channels,
+				      ams_size - num_channels);
 		if (ret < 0)
 			return ret;
 

base-commit: 2ef6f5c4ee56e90c237c5f7687f09e635f7d30a9
-- 
2.53.0


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2026-10-22 14:06 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-10-22 14:06 [PATCH v2] iio: adc: xilinx-ams: fix out-of-bounds accesses when parsing channels Arnav Kapoor

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®