mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH v1] arm64: dts: colibri-imx8x-aster: Enable I2C bus
@ 2026-10-22 16:17 Francesco Dolcini
  2026-10-22 21:32 ` Frank.Li
  0 siblings, 1 reply; 2+ messages in thread
From: Francesco Dolcini @ 2026-10-22 16:17 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Frank Li,
	Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam
  Cc: Francesco Dolcini, devicetree, imx, linux-arm-kernel, linux-kernel

From: Francesco Dolcini <francesco.dolcini@toradex.com>

The Colibri standard I2C bus (SODIMM 194/196) is available on the Aster
carrier board on the 40-pin extension header X20, the Arduino UNO header
X18 and the capacitive touch connector X3, with pull-ups on the carrier.

Enable the bus to allow userspace access to I2C devices connected
through this interface.

Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
---
 arch/arm64/boot/dts/freescale/imx8x-colibri-aster.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-aster.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-aster.dtsi
index f7bbb2153ae0..11b1d45e5dfd 100644
--- a/arch/arm64/boot/dts/freescale/imx8x-colibri-aster.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-aster.dtsi
@@ -26,6 +26,11 @@ &fec1 {
 	status = "okay";
 };
 
+/* Colibri I2C */
+&i2c1 {
+	status = "okay";
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog0>;
-- 
2.47.3


^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [PATCH v1] arm64: dts: colibri-imx8x-aster: Enable I2C bus
  2026-10-22 16:17 [PATCH v1] arm64: dts: colibri-imx8x-aster: Enable I2C bus Francesco Dolcini
@ 2026-10-22 21:32 ` Frank.Li
  0 siblings, 0 replies; 2+ messages in thread
From: Frank.Li @ 2026-10-22 21:32 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Sascha Hauer,
	Pengutronix Kernel Team, Fabio Estevam, Francesco Dolcini
  Cc: Frank Li, Francesco Dolcini, devicetree, imx, linux-arm-kernel,
	linux-kernel

From: Frank Li <Frank.Li@nxp.com>


On Thu, 22 Oct 2026 18:17:06 +0200, Francesco Dolcini wrote:
> The Colibri standard I2C bus (SODIMM 194/196) is available on the Aster
> carrier board on the 40-pin extension header X20, the Arduino UNO header
> X18 and the capacitive touch connector X3, with pull-ups on the carrier.
>
> Enable the bus to allow userspace access to I2C devices connected
> through this interface.
>
> [...]

Applied to imx/dt64-intend, will see in linux-next after v7.4-rc1,
thanks!

[1/1] arm64: dts: colibri-imx8x-aster: Enable I2C bus
      commit: ae05b3817c0c5216b829ee4a096adc3833bc33b1

Best regards,
--
Frank Li <Frank.Li@nxp.com>

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2026-10-22 21:32 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-10-22 16:17 [PATCH v1] arm64: dts: colibri-imx8x-aster: Enable I2C bus Francesco Dolcini
2026-10-22 21:32 ` Frank.Li

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®