[PATCH v5 2/4] media: imagination: e5010: Fix clk never enabled without CONFIG_PM

[<b-brnich@ti.com>]

From: Brandon Brnich <b-brnich@ti.com>

clk_prepare_enable is not called anywhere unless CONFIG_PM is set. This
means without CONFIG_PM, the JPEG Encoder will not function properly.

Add this call during the probe sequence to properly configure the device.
If video_registration fails after clk is enabled, clk would be left on.
Make a label to cover this case.

Fixes: a1e294045885 ("media: imagination: Add E5010 JPEG Encoder driver")
Cc: stable@vger.kernel.org
Signed-off-by: Brandon Brnich <b-brnich@ti.com>
---
 .../media/platform/imagination/e5010-jpeg-enc.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/imagination/e5010-jpeg-enc.c b/drivers/media/platform/imagination/e5010-jpeg-enc.c
index 628d3ee35fb83..b8e24f816648d 100644
--- a/drivers/media/platform/imagination/e5010-jpeg-enc.c
+++ b/drivers/media/platform/imagination/e5010-jpeg-enc.c
@@ -1101,10 +1101,18 @@ static int e5010_probe(struct platform_device *pdev)
 
 	pm_runtime_enable(dev);
 
+	if (!pm_runtime_enabled(dev)) {
+		ret = clk_prepare_enable(e5010->clk);
+		if (ret) {
+			dev_err_probe(dev, ret, "failed to enable clock\n");
+			goto fail_after_v4l2_m2m_init;
+		}
+	}
+
 	ret = video_register_device(e5010->vdev, VFL_TYPE_VIDEO, 0);
 	if (ret) {
 		dev_err_probe(dev, ret, "failed to register video device\n");
-		goto fail_after_video_register_device;
+		goto fail_after_clock_enable;
 	}
 
 	v4l2_info(&e5010->v4l2_dev, "Device registered as /dev/video%d\n",
@@ -1112,6 +1120,11 @@ static int e5010_probe(struct platform_device *pdev)
 
 	return 0;
 
+fail_after_clock_enable:
+	if (pm_runtime_enabled(dev))
+		pm_runtime_disable(dev);
+	else
+		clk_disable_unprepare(e5010->clk);
 fail_after_v4l2_m2m_init:
 	v4l2_m2m_release(e5010->m2m_dev);
 fail_after_v4l2_register:
@@ -1126,6 +1139,8 @@ static void e5010_remove(struct platform_device *pdev)
 	struct e5010_dev *e5010 = platform_get_drvdata(pdev);
 
 	pm_runtime_disable(e5010->dev);
+	if (!pm_runtime_status_suspended(&pdev->dev))
+		clk_disable_unprepare(e5010->clk);
 	video_unregister_device(e5010->vdev);
 	v4l2_m2m_release(e5010->m2m_dev);
 	v4l2_device_unregister(&e5010->v4l2_dev);
-- 
2.43.0