From: <b-brnich@ti.com>
To: <devarsht@ti.com>, <mchehab@kernel.org>, <hverkuil@kernel.org>,
<nicolas.dufresne@collabora.com>,
<benjamin.gaignard@collabora.com>, <linux-media@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Cc: <b-brnich@ti.com>
Subject: [PATCH v5 4/4] media: imagination: e5010: Enable autosuspend for runtime PM
Date: Thu, 22 Oct 2026 14:15:03 -0500 [thread overview]
Message-ID: <20261022191503.1025072-5-b-brnich@ti.com> (raw)
In-Reply-To: <20261022191503.1025072-1-b-brnich@ti.com>
From: Brandon Brnich <b-brnich@ti.com>
Current implementation only has one call to turn the device on -
start_streaming. This can waste power of device as the device can be in
STREAM_ON state, but no buffers are actually being submitted.
Need to set last_context_run to NULL in resume hook. This will trigger
QP value updates during next call to device_run.
Signed-off-by: Brandon Brnich <b-brnich@ti.com>
---
.../platform/imagination/e5010-jpeg-enc.c | 50 +++++++++----------
.../platform/imagination/e5010-jpeg-enc.h | 1 +
2 files changed, 26 insertions(+), 25 deletions(-)
diff --git a/drivers/media/platform/imagination/e5010-jpeg-enc.c b/drivers/media/platform/imagination/e5010-jpeg-enc.c
index c25ab9627518e..228137243f749 100644
--- a/drivers/media/platform/imagination/e5010-jpeg-enc.c
+++ b/drivers/media/platform/imagination/e5010-jpeg-enc.c
@@ -976,6 +976,7 @@ static irqreturn_t e5010_irq(int irq, void *data)
v4l2_m2m_job_finish(e5010->m2m_dev, ctx->fh.m2m_ctx);
dprintk(e5010, 3, "ctx: 0x%p Finish job\n", ctx);
+ pm_runtime_put_autosuspend(e5010->dev);
job_unlock:
spin_unlock(&e5010->hw_lock);
@@ -1099,6 +1100,8 @@ static int e5010_probe(struct platform_device *pdev)
goto fail_after_v4l2_m2m_init;
}
+ pm_runtime_set_autosuspend_delay(dev, JPEG_AUTOSUSPEND_DELAY_MS);
+ pm_runtime_use_autosuspend(dev);
pm_runtime_enable(dev);
if (!pm_runtime_enabled(dev)) {
@@ -1107,6 +1110,11 @@ static int e5010_probe(struct platform_device *pdev)
dev_err_probe(dev, ret, "failed to enable clock\n");
goto fail_after_v4l2_m2m_init;
}
+ ret = e5010_init_device(e5010);
+ if (ret) {
+ dev_err_probe(dev, ret, "failed to init device\n");
+ goto fail_after_clock_enable;
+ }
}
ret = video_register_device(e5010->vdev, VFL_TYPE_VIDEO, 0);
@@ -1121,10 +1129,12 @@ static int e5010_probe(struct platform_device *pdev)
return 0;
fail_after_clock_enable:
- if (pm_runtime_enabled(dev))
+ if (pm_runtime_enabled(dev)) {
pm_runtime_disable(dev);
- else
+ pm_runtime_dont_use_autosuspend(dev);
+ } else {
clk_disable_unprepare(e5010->clk);
+ }
fail_after_v4l2_m2m_init:
v4l2_m2m_release(e5010->m2m_dev);
fail_after_v4l2_register:
@@ -1139,6 +1149,7 @@ static void e5010_remove(struct platform_device *pdev)
struct e5010_dev *e5010 = platform_get_drvdata(pdev);
pm_runtime_disable(e5010->dev);
+ pm_runtime_dont_use_autosuspend(e5010->dev);
if (!pm_runtime_status_suspended(&pdev->dev))
clk_disable_unprepare(e5010->clk);
video_unregister_device(e5010->vdev);
@@ -1304,31 +1315,13 @@ static int e5010_encoder_cmd(struct file *file, void *priv,
static int e5010_start_streaming(struct vb2_queue *q, unsigned int count)
{
struct e5010_context *ctx = vb2_get_drv_priv(q);
- int ret;
struct e5010_q_data *queue = get_queue(ctx, q->type);
v4l2_m2m_update_start_streaming_state(ctx->fh.m2m_ctx, q);
queue->sequence = 0;
- ret = pm_runtime_resume_and_get(ctx->e5010->dev);
- if (ret < 0) {
- v4l2_err(&ctx->e5010->v4l2_dev, "failed to power up jpeg\n");
- goto fail;
- }
-
- ret = e5010_init_device(ctx->e5010);
- if (ret) {
- v4l2_err(&ctx->e5010->v4l2_dev, "failed to Enable e5010 device\n");
- goto fail;
- }
-
return 0;
-
-fail:
- e5010_vb2_buffers_return(q, VB2_BUF_STATE_QUEUED);
-
- return ret;
}
static void e5010_stop_streaming(struct vb2_queue *q)
@@ -1344,8 +1337,6 @@ static void e5010_stop_streaming(struct vb2_queue *q)
v4l2_m2m_has_stopped(ctx->fh.m2m_ctx)) {
v4l2_event_queue_fh(&ctx->fh, &e5010_eos_event);
}
-
- pm_runtime_put_sync(ctx->e5010->dev);
}
static void e5010_device_run(void *priv)
@@ -1358,7 +1349,6 @@ static void e5010_device_run(void *priv)
unsigned long flags;
int num_planes = ctx->out_queue.fmt->num_planes;
- spin_lock_irqsave(&e5010->hw_lock, flags);
s_vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
WARN_ON(!s_vb);
d_vb = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
@@ -1366,6 +1356,14 @@ static void e5010_device_run(void *priv)
if (!s_vb || !d_vb)
goto no_ready_buf_err;
+ ret = pm_runtime_resume_and_get(e5010->dev);
+ if (ret < 0) {
+ dev_err(e5010->dev, "Device failed to turn on\n");
+ goto no_ready_buf_err;
+ }
+
+ spin_lock_irqsave(&e5010->hw_lock, flags);
+
s_vb->sequence = ctx->out_queue.sequence++;
d_vb->sequence = ctx->cap_queue.sequence++;
@@ -1487,7 +1485,8 @@ static void e5010_device_run(void *priv)
device_busy_err:
e5010_reset(e5010->dev, e5010->core_base, e5010->mmu_base);
-
+ spin_unlock_irqrestore(&e5010->hw_lock, flags);
+ pm_runtime_put_autosuspend(e5010->dev);
no_ready_buf_err:
if (s_vb) {
v4l2_m2m_src_buf_remove_by_buf(ctx->fh.m2m_ctx, s_vb);
@@ -1501,7 +1500,6 @@ static void e5010_device_run(void *priv)
v4l2_m2m_buf_done(d_vb, VB2_BUF_STATE_ERROR);
}
v4l2_m2m_job_finish(e5010->m2m_dev, ctx->fh.m2m_ctx);
- spin_unlock_irqrestore(&e5010->hw_lock, flags);
}
#ifdef CONFIG_PM
@@ -1523,6 +1521,8 @@ static int e5010_runtime_resume(struct device *dev)
return ret;
}
+ e5010->last_context_run = NULL;
+
return 0;
}
diff --git a/drivers/media/platform/imagination/e5010-jpeg-enc.h b/drivers/media/platform/imagination/e5010-jpeg-enc.h
index da57bc1baa464..807821ded127e 100644
--- a/drivers/media/platform/imagination/e5010-jpeg-enc.h
+++ b/drivers/media/platform/imagination/e5010-jpeg-enc.h
@@ -23,6 +23,7 @@
#define DEFAULT_HEIGHT 480
#define E5010_MODULE_NAME "e5010"
#define JPEG_MAX_BYTES_PER_PIXEL 2
+#define JPEG_AUTOSUSPEND_DELAY_MS 100
/* JPEG marker definitions */
#define START_OF_IMAGE 0xFFD8
--
2.43.0
prev parent reply other threads:[~2026-10-22 19:16 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-22 19:14 [PATCH v5 0/4] E5010 Probe Cleanup and Adding autosuspend b-brnich
2026-10-22 19:15 ` [PATCH v5 1/4] media: imagination: e5010: release m2m device on probe failure b-brnich
2026-10-22 19:15 ` [PATCH v5 2/4] media: imagination: e5010: Fix clk never enabled without CONFIG_PM b-brnich
2026-10-22 19:15 ` [PATCH v5 3/4] media: imagination: e5010: Move e5010_init_device to Runtime Resume Hook b-brnich
2026-10-22 19:15 ` b-brnich [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261022191503.1025072-5-b-brnich@ti.com \
--to=b-brnich@ti.com \
--cc=benjamin.gaignard@collabora.com \
--cc=devarsht@ti.com \
--cc=hverkuil@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=nicolas.dufresne@collabora.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®