From: James Hilliard <james.hilliard1@gmail.com>
To: "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
"Jiri Slaby" <jirislaby@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Andy Shevchenko" <andriy.shevchenko@linux.intel.com>,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>,
"Chen-Yu Tsai" <wens@kernel.org>,
"Jernej Skrabec" <jernej.skrabec@gmail.com>,
"Samuel Holland" <samuel@sholland.org>
Cc: linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org,
devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev,
James Hilliard <james.hilliard1@gmail.com>
Subject: [PATCH v2 3/3] arm64: dts: allwinner: h616: identify the UART integration
Date: Fri, 23 Oct 2026 15:19:29 -0600 [thread overview]
Message-ID: <20261023-submit-h616-uart-fifo-v1-v2-3-af0593504635@gmail.com> (raw)
In-Reply-To: <20261023-submit-h616-uart-fifo-v1-v2-0-af0593504635@gmail.com>
Use the H616 UART compatible for all six controllers so the driver can
select their fixed 256-byte FIFO configuration and register layout.
Retain the generic DesignWare compatible as a fallback for older kernels.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
---
arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
index c6b3a3f8359a..b4b2f85726e0 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
@@ -550,7 +550,7 @@ mmc2: mmc@4022000 {
};
uart0: serial@5000000 {
- compatible = "snps,dw-apb-uart";
+ compatible = "allwinner,sun50i-h616-uart", "snps,dw-apb-uart";
reg = <0x05000000 0x400>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
@@ -563,7 +563,7 @@ uart0: serial@5000000 {
};
uart1: serial@5000400 {
- compatible = "snps,dw-apb-uart";
+ compatible = "allwinner,sun50i-h616-uart", "snps,dw-apb-uart";
reg = <0x05000400 0x400>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
@@ -576,7 +576,7 @@ uart1: serial@5000400 {
};
uart2: serial@5000800 {
- compatible = "snps,dw-apb-uart";
+ compatible = "allwinner,sun50i-h616-uart", "snps,dw-apb-uart";
reg = <0x05000800 0x400>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
@@ -589,7 +589,7 @@ uart2: serial@5000800 {
};
uart3: serial@5000c00 {
- compatible = "snps,dw-apb-uart";
+ compatible = "allwinner,sun50i-h616-uart", "snps,dw-apb-uart";
reg = <0x05000c00 0x400>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
@@ -602,7 +602,7 @@ uart3: serial@5000c00 {
};
uart4: serial@5001000 {
- compatible = "snps,dw-apb-uart";
+ compatible = "allwinner,sun50i-h616-uart", "snps,dw-apb-uart";
reg = <0x05001000 0x400>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
@@ -615,7 +615,7 @@ uart4: serial@5001000 {
};
uart5: serial@5001400 {
- compatible = "snps,dw-apb-uart";
+ compatible = "allwinner,sun50i-h616-uart", "snps,dw-apb-uart";
reg = <0x05001400 0x400>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
--
2.53.0
prev parent reply other threads:[~2026-10-23 21:19 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-23 21:19 [PATCH v2 0/3] serial: 8250_dw: describe the Allwinner H616 UART configuration James Hilliard
2026-10-23 21:19 ` [PATCH v2 1/3] dt-bindings: serial: snps-dw-apb-uart: add Allwinner H616 James Hilliard
2026-10-23 21:19 ` [PATCH v2 2/3] serial: 8250_dw: configure the Allwinner H616 UART James Hilliard
2026-10-24 10:54 ` Andy Shevchenko
2026-10-23 21:19 ` James Hilliard [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261023-submit-h616-uart-fifo-v1-v2-3-af0593504635@gmail.com \
--to=james.hilliard1@gmail.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=jernej.skrabec@gmail.com \
--cc=jirislaby@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=robh@kernel.org \
--cc=samuel@sholland.org \
--cc=wens@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®