mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH ath-next] wifi: ath11k: update rx_channel on a channel switch
@ 2026-10-25  0:32 Christopher Griffin via B4 Relay
  0 siblings, 0 replies; only message in thread
From: Christopher Griffin via B4 Relay @ 2026-10-25  0:32 UTC (permalink / raw)
  To: Jeff Johnson; +Cc: linux-wireless, ath11k, linux-kernel, Christopher Griffin

From: Christopher Griffin <christophergriffin05@gmail.com>

ath11k keeps the radio's current channel in ar->rx_channel: survey dumps
flag that channel as in use, and only for it is the bss channel info
requested. ath11k_mac_op_add_chanctx() sets it, but a channel switch
(CSA, or hostapd's switch_chan) goes through ath11k_mac_update_vif_chan(),
which leaves it at the old channel ("TODO: Update ar->rx_channel"). After
a switch the survey keeps marking the old channel as in use and never
refreshes the new one.

Set it to the new context's channel, as ath10k does in its
ath10k_mac_update_vif_chan(). ath11k uses one channel context per radio,
so every vif in the switch moves to the same channel.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.9.0.1-02146-QCAHKSWPL_SILICONZ-1

Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Christopher Griffin <christophergriffin05@gmail.com>
---
Found on an Arista C-260 (IPQ8074) while chasing a wrong survey noise
floor; the noise floor fix itself is sent separately ("wifi: ath11k:
report the measured noise floor of the channel in use") and relies on
this one after a channel switch.
---
 drivers/net/wireless/ath/ath11k/mac.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 1a237adaa..57873c875 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -7800,7 +7800,11 @@ ath11k_mac_update_vif_chan(struct ath11k *ar,
 	 * should be available for the channel switch now.
 	 */
 
-	/* TODO: Update ar->rx_channel */
+	if (n_vifs) {
+		spin_lock_bh(&ar->data_lock);
+		ar->rx_channel = vifs[0].new_ctx->def.chan;
+		spin_unlock_bh(&ar->data_lock);
+	}
 
 	for (i = 0; i < n_vifs; i++) {
 		arvif = ath11k_vif_to_arvif(vifs[i].vif);

---
base-commit: cd026e68fdbf88b9cc522b76c7a9d92c9a41f709
change-id: 20261024-ath11k-rx-channel-switch-4ae05c7a827c

Best regards,
--  
Christopher Griffin <christophergriffin05@gmail.com>



^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2026-10-25  0:32 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-10-25  0:32 [PATCH ath-next] wifi: ath11k: update rx_channel on a channel switch Christopher Griffin via B4 Relay

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®