[PATCH 0/2] hwmon: (pmbus/max20830) add MAX20810/15 and LTM4739/40

[PATCH 0/2] hwmon: (pmbus/max20830) add MAX20810/15 and LTM4739/40

[Carlos Jones Jr]

This series adds support for four additional members of the MAX20830
PMBus regulator family to the existing max20830 driver:

  - MAX20810 (10A) and MAX20815 (15A)
  - LTM4739 and LTM4740, the LTM-series module equivalents of the
    MAX20810 and MAX20815 respectively

All four share the MAX20830 PMBus command set and telemetry, so support
amounts to accepting their IC_DEVICE_ID and documenting the parts; no new
register handling is required. The LTM4739/LTM4740 modules are built
around the MAX20810/MAX20815 dies and report the die's IC_DEVICE_ID by
design ("MAX20810B" / "MAX20815B"), which the driver matches at probe.
Device-tree matching uses the existing adi,max20830 fallback compatible,
so no new of_match entries are needed.

Patch 1 adds the device-tree binding compatibles; patch 2 adds the
driver support and documentation.

Carlos Jones Jr (2):
  dt-bindings: hwmon: max20830: Add MAX20810, MAX20815, LTM4739, LTM4740
  hwmon: (pmbus/max20830) Add support for MAX20810, MAX20815, LTM4739,
    LTM4740

 .../bindings/hwmon/pmbus/adi,max20830.yaml    |  4 ++
 Documentation/hwmon/max20830.rst              | 51 ++++++++++++++++---
 drivers/hwmon/pmbus/max20830.c                |  4 +-
 3 files changed, 52 insertions(+), 7 deletions(-)


base-commit: e1b3c2630d5b8bc755fe4ba86d20d08c734eb504
-- 
2.43.0

[PATCH 1/2] dt-bindings: hwmon: max20830: Add MAX20810, MAX20815, LTM4739, LTM4740

[Carlos Jones Jr]

The MAX20810 (10A) and MAX20815 (15A) are members of the same device
family as the MAX20830, sharing an identical PMBus command set and
telemetry (VIN, VOUT, IOUT, TEMP). The LTM4739 and LTM4740 are the
LTM-series module equivalents of the MAX20810 and MAX20815 respectively.

All variants use the existing adi,max20830 fallback compatible.

Signed-off-by: Carlos Jones Jr <carlosjr.jones@analog.com>
---
 .../devicetree/bindings/hwmon/pmbus/adi,max20830.yaml         | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/adi,max20830.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/adi,max20830.yaml
index cc50a4ee44a2..8194108d61e3 100644
--- a/Documentation/devicetree/bindings/hwmon/pmbus/adi,max20830.yaml
+++ b/Documentation/devicetree/bindings/hwmon/pmbus/adi,max20830.yaml
@@ -26,6 +26,10 @@ properties:
       - const: adi,max20830
       - items:
           - enum:
+              - adi,ltm4739
+              - adi,ltm4740
+              - adi,max20810
+              - adi,max20815
               - adi,max20830c
               - adi,max20840c
           - const: adi,max20830
-- 
2.43.0

[PATCH 2/2] hwmon: (pmbus/max20830) Add support for MAX20810, MAX20815, LTM4739, LTM4740

[Carlos Jones Jr]

Add support for additional members of the MAX20830 family:
- MAX20810: 2.7V-16V input, up to 10A output
- MAX20815: 2.7V-16V input, up to 15A output
- LTM4739:  3V-15V input, up to 10A output
- LTM4740:  3V-15V input, up to 15A output

The LTM4739 and LTM4740 are the LTM-series equivalents of the MAX20810
and MAX20815 respectively. All share the MAX20830 PMBus command set and
telemetry, so no new register handling is required; they are accepted by
matching their IC_DEVICE_ID.

The LTM4739 and LTM4740 are uModules built around the MAX20810/MAX20815
dies and therefore report the die's IC_DEVICE_ID by design: "MAX20810B"
and "MAX20815B" respectively. Match on those identifiers rather than on
the module part names.

Matching is via the existing adi,max20830 fallback compatible; no new
of_match entries are needed.

Signed-off-by: Carlos Jones Jr <carlosjr.jones@analog.com>
---
 Documentation/hwmon/max20830.rst | 51 ++++++++++++++++++++++++++++----
 drivers/hwmon/pmbus/max20830.c   |  4 ++-
 2 files changed, 48 insertions(+), 7 deletions(-)

diff --git a/Documentation/hwmon/max20830.rst b/Documentation/hwmon/max20830.rst
index b850f3b6e40d..7c4f27f40d60 100644
--- a/Documentation/hwmon/max20830.rst
+++ b/Documentation/hwmon/max20830.rst
@@ -5,6 +5,38 @@ Kernel driver max20830
 
 Supported chips:
 
+  * Analog Devices LTM4739
+
+    Prefix: 'ltm4739'
+
+    Addresses scanned: -
+
+    Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ltm4739.pdf
+
+  * Analog Devices LTM4740
+
+    Prefix: 'ltm4740'
+
+    Addresses scanned: -
+
+    Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ltm4740.pdf
+
+  * Analog Devices MAX20810
+
+    Prefix: 'max20810'
+
+    Addresses scanned: -
+
+    Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max20810.pdf
+
+  * Analog Devices MAX20815
+
+    Prefix: 'max20815'
+
+    Addresses scanned: -
+
+    Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max20815.pdf
+
   * Analog Devices MAX20830
 
     Prefix: 'max20830'
@@ -37,13 +69,20 @@ Author:
 Description
 -----------
 
-This driver supports hardware monitoring for Analog Devices MAX20830, MAX20830C
-and MAX20840C. These are Step-Down Switching Regulator with PMBus Interface.
+This driver supports hardware monitoring for Analog Devices MAX20810, MAX20815,
+MAX20830, MAX20830C, MAX20840C, LTM4739, and LTM4740 Step-Down Switching
+Regulators with PMBus Interface.
+
+The MAX20810 and LTM4739 are 10A fully integrated step-down DC-DC switching
+regulators (2.7V-16V and 3V-15V input respectively). The MAX20815 and LTM4740
+provide up to 15A. The MAX20830 and MAX20830C provide up to 30A. The MAX20840C
+provides up to 40A. Through the PMBus interface, all devices can monitor
+input/output voltages, output current and temperature.
 
-MAX20830, and MAX20830C are 2.7V to 16V, 30A fully integrated step-down DC-DC
-switching regulators. MAX20840C is similar but can reach 40A. Through the PMBus
-interface, these devices can monitor input/output voltages, output current and
-temperature.
+LTM4739 and LTM4740 are the LTM-family equivalents of MAX20810 and MAX20815
+respectively, sharing an identical PMBus command set. These modules report the
+underlying die's IC_DEVICE_ID by design ("MAX20810B" and "MAX20815B"
+respectively), which the driver matches during probe.
 
 The driver is a client driver to the core PMBus driver. Please see
 Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
diff --git a/drivers/hwmon/pmbus/max20830.c b/drivers/hwmon/pmbus/max20830.c
index 4d25a084af09..7cfcf1fe01e1 100644
--- a/drivers/hwmon/pmbus/max20830.c
+++ b/drivers/hwmon/pmbus/max20830.c
@@ -21,6 +21,8 @@ struct max20830_data {
 };
 
 static const char * const supported_chip_ids[] = {
+	"MAX20810B",	/* also reported by the LTM4739 module */
+	"MAX20815B",	/* also reported by the LTM4740 module */
 	"MAX20830",
 	"MAX20830C",
 	"MAX20840C",
@@ -34,7 +36,7 @@ static const char * const supported_chip_ids[] = {
  * like in1_max, in1_crit, etc. will not be available. Only in1_input (the
  * scaled output voltage) is supported.
  *
- * MAX20830 uses an external resistor divider for voltage sensing:
+ * MAX20830 family uses an external resistor divider for voltage sensing:
  * - VOUT_COMMAND and VOUT_MAX set the reference voltage at the feedback pin
  * - READ_VOUT reports the feedback voltage, which needs to be scaled for actual
  *   output voltage
-- 
2.43.0

Re: [PATCH 2/2] hwmon: (pmbus/max20830) Add support for MAX20810, MAX20815, LTM4739, LTM4740

[Guenter Roeck]

Hi,

On 10/25/26 22:02, Carlos Jones Jr wrote:
> Add support for additional members of the MAX20830 family:
> - MAX20810: 2.7V-16V input, up to 10A output
> - MAX20815: 2.7V-16V input, up to 15A output
> - LTM4739:  3V-15V input, up to 10A output
> - LTM4740:  3V-15V input, up to 15A output
> 
> The LTM4739 and LTM4740 are the LTM-series equivalents of the MAX20810
> and MAX20815 respectively. All share the MAX20830 PMBus command set and
> telemetry, so no new register handling is required; they are accepted by
> matching their IC_DEVICE_ID.
> 
> The LTM4739 and LTM4740 are uModules built around the MAX20810/MAX20815
> dies and therefore report the die's IC_DEVICE_ID by design: "MAX20810B"
> and "MAX20815B" respectively. Match on those identifiers rather than on
> the module part names.
> 

According to the datasheets, MAX20810 reports "MAX20810", and MAX20815 reports
"MAX20815". I find no reference to the "B" variants on the Analog Web page.

LTM4739, according to its datasheet, reports "LTM4739”, and LTM4740 reports
"LTM4740".

Please explain the discrepancy.

Thanks,
Guenter

Re: [PATCH 1/2] dt-bindings: hwmon: max20830: Add MAX20810, MAX20815, LTM4739, LTM4740

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 75 bytes --]

Acked-by: Conor Dooley <conor.dooley@microchip.com>
pw-bot: not-applicable

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]