mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH] iio: trigger: fix use-after-free in current_trigger_store() on concurrent writers
@ 2026-10-26 10:02 Yu Zhang
  0 siblings, 0 replies; only message in thread
From: Yu Zhang @ 2026-10-26 10:02 UTC (permalink / raw)
  To: Jonathan Cameron
  Cc: David Lechner, Nuno Sá,
	Andy Shevchenko, linux-iio, linux-kernel, stable, Yu Zhang

current_trigger_store() holds iio_dev_opaque->mlock only around the
INDIO_BUFFER_TRIGGERED / trig_readonly checks and then drops it. The rest
runs unlocked: it reads the current trigger into oldtrig, acquires the new
one by name, stores it into indio_dev->trig, and drops the old trigger's
reference with iio_trigger_put().

sysfs does not serialize writes to the same attribute issued through
different open file descriptors (each open has its own kernfs_open_file),
so two threads can run current_trigger_store() on the same
.../trigger/current_trigger concurrently. Both read the same oldtrig, both
overwrite indio_dev->trig, and both call iio_trigger_put(oldtrig). The
extra put drops the trigger's refcount to zero while it is still in use,
frees it, and a concurrent writer then dereferences the freed trigger.

With two sets of writers hammering current_trigger between two software
triggers on an iio_dummy device, KASAN reports:

  refcount_t: addition on 0; use-after-free.
  WARNING: CPU: 3 PID: 3467 at refcount_warn_saturate+0xbb/0xe0
   kobject_get+0xf6/0x100
   current_trigger_store+0x15c/0x4b0
  ...
  BUG: KASAN: slab-use-after-free in current_trigger_store+0x168/0x4b0
  Freed by task 3468:
   kobject_put+0x125/0x220
   current_trigger_store+0x2cc/0x4b0
  Allocated by task 3454:
   __iio_trigger_alloc+0xc7/0x100
  ...
  Oops: general protection fault
   __module_get+0x27/0xd0
   current_trigger_store+0x192/0x4b0

Hold mlock across the whole operation so that reading oldtrig, swapping
indio_dev->trig and dropping the reference are atomic with respect to
other writers (and to buffer enable, which the -EBUSY check guards).
Acquiring the new trigger with iio_trigger_acquire_by_name() under mlock
is safe: it only takes iio_trigger_list_lock, and the buffer path already
calls iio_trigger_{attach,detach}_poll_func() with mlock held.

Cc: stable@vger.kernel.org
Signed-off-by: Yu Zhang <yuz08559@gmail.com>
---
 drivers/iio/industrialio-trigger.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/iio/industrialio-trigger.c b/drivers/iio/industrialio-trigger.c
index 76926fe..9241cd6 100644
--- a/drivers/iio/industrialio-trigger.c
+++ b/drivers/iio/industrialio-trigger.c
@@ -441,17 +441,18 @@ static ssize_t current_trigger_store(struct device *dev,
 {
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev);
-	struct iio_trigger *oldtrig = indio_dev->trig;
+	struct iio_trigger *oldtrig;
 	struct iio_trigger *trig;
 	int ret;
 
-	scoped_guard(mutex, &iio_dev_opaque->mlock) {
-		if (iio_dev_opaque->currentmode == INDIO_BUFFER_TRIGGERED)
-			return -EBUSY;
-		if (iio_dev_opaque->trig_readonly)
-			return -EPERM;
-	}
+	guard(mutex)(&iio_dev_opaque->mlock);
+
+	if (iio_dev_opaque->currentmode == INDIO_BUFFER_TRIGGERED)
+		return -EBUSY;
+	if (iio_dev_opaque->trig_readonly)
+		return -EPERM;
 
+	oldtrig = indio_dev->trig;
 	trig = iio_trigger_acquire_by_name(buf);
 	if (oldtrig == trig) {
 		ret = len;
-- 
2.43.0


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2026-10-26 10:03 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-10-26 10:02 [PATCH] iio: trigger: fix use-after-free in current_trigger_store() on concurrent writers Yu Zhang

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®