[PATCH v1 0/2] usb: tegra: separate schema and adjust OTG logic

[PATCH v1 0/2] usb: tegra: separate schema and adjust OTG logic

[Svyatoslav Ryhel]

Separate Tegra specific USB controller props into a dedicated schema.
Adjust USB OTG mode behavior with extcon use.

Jordan Viknar (1):
  usb: phy: tegra: Disable internal USB sensing if extcon is used

Svyatoslav Ryhel (1):
  dt-bindings: usb: Move Tegra-specific Chipidea USB properties into a
    dedicated schema

 .../bindings/usb/chipidea,usb2-tegra.yaml     | 88 +++++++++++++++++++
 .../devicetree/bindings/usb/ci-hdrc-usb2.yaml | 22 -----
 drivers/usb/phy/phy-tegra-usb.c               | 55 ++++++++++++
 include/linux/usb/tegra_usb_phy.h             |  1 +
 4 files changed, 144 insertions(+), 22 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/chipidea,usb2-tegra.yaml

-- 
2.53.0

[PATCH v1 1/2] dt-bindings: usb: Move Tegra-specific Chipidea USB properties into a dedicated schema

[Svyatoslav Ryhel]

Move all Tegra-specific Chipidea devices and their properties into a
dedicated schema file, by analogy with i.MX.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
 .../bindings/usb/chipidea,usb2-tegra.yaml     | 88 +++++++++++++++++++
 .../devicetree/bindings/usb/ci-hdrc-usb2.yaml | 22 -----
 2 files changed, 88 insertions(+), 22 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/chipidea,usb2-tegra.yaml

diff --git a/Documentation/devicetree/bindings/usb/chipidea,usb2-tegra.yaml b/Documentation/devicetree/bindings/usb/chipidea,usb2-tegra.yaml
new file mode 100644
index 0000000000000..78046f8a63ad5
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/chipidea,usb2-tegra.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/chipidea,usb2-tegra.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra USB2 ChipIdea USB controller
+
+maintainers:
+  - Svyatoslav Ryhel <clamor95@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-ehci
+          - nvidia,tegra20-udc
+          - nvidia,tegra30-ehci
+          - nvidia,tegra30-udc
+          - nvidia,tegra114-udc
+          - nvidia,tegra124-udc
+      - items:
+          - enum:
+              - nvidia,tegra114-ehci
+              - nvidia,tegra124-ehci
+              - nvidia,tegra210-ehci
+          - const: nvidia,tegra30-ehci
+
+  operating-points-v2:
+    description: A phandle to the OPP table containing the performance states.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  nvidia,phy:
+    description: phandle of usb phy that connects to the port. Use "phys" instead.
+    $ref: /schemas/types.yaml#/definitions/phandle
+    deprecated: true
+
+  nvidia,needs-double-reset:
+    description: Indicates double reset or not.
+    type: boolean
+    deprecated: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+
+allOf:
+  - $ref: chipidea,usb2-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra30-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    usb@7d000000 {
+        compatible = "nvidia,tegra30-udc";
+        reg = <0x7d000000 0x4000>;
+        interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+        phy_type = "utmi";
+        clocks = <&tegra_car TEGRA30_CLK_USBD>;
+        resets = <&tegra_car 22>;
+        reset-names = "usb";
+        phys = <&phy1>;
+        power-domains = <&pd_core>;
+        operating-points-v2 = <&usbd_dvfs_opp_table>;
+
+        dr_mode = "otg";
+
+        hnp-disable;
+        srp-disable;
+        adp-disable;
+
+        usb-role-switch;
+        extcon = <&charger>, <&extcon>; /* vbus, id */
+        vbus-supply = <&usb_otg_vbus>;
+
+        port {
+            usb_in: endpoint {
+                remote-endpoint = <&connector_out>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml
index 620b564914d43..b73bea61dcac0 100644
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml
@@ -17,20 +17,8 @@ properties:
           - chipidea,usb2
           - lsi,zevio-usb
           - nuvoton,npcm750-udc
-          - nvidia,tegra20-ehci
-          - nvidia,tegra20-udc
-          - nvidia,tegra30-ehci
-          - nvidia,tegra30-udc
-          - nvidia,tegra114-udc
-          - nvidia,tegra124-udc
           - nxp,s32g2-usb
           - qcom,ci-hdrc
-      - items:
-          - enum:
-              - nvidia,tegra114-ehci
-              - nvidia,tegra124-ehci
-              - nvidia,tegra210-ehci
-          - const: nvidia,tegra30-ehci
       - items:
           - const: xlnx,zynq-usb-2.20a
           - const: chipidea,usb2
@@ -66,16 +54,6 @@ properties:
           - description: register offset
           - description: phy index
 
-  nvidia,phy:
-    description: phandle of usb phy that connects to the port. Use "phys" instead.
-    $ref: /schemas/types.yaml#/definitions/phandle
-    deprecated: true
-
-  nvidia,needs-double-reset:
-    description: Indicates double reset or not.
-    type: boolean
-    deprecated: true
-
   ulpi:
     type: object
     additionalProperties: false
-- 
2.53.0

[PATCH v1 2/2] usb: phy: tegra: Disable internal USB sensing if extcon is used

[Svyatoslav Ryhel]

From: Jordan Viknar <jordanviknar@gmail.com>

The Tegra USB PHY features four VBUS sensors: A_VBUS_VLD, A_SESS_VLD,
B_SESS_VLD, and B_SESS_END. This allows the SoC to detect mode switches
and natively work with OTG. On some devices, instead of relying on Tegra's
own mechanism, some type of extcon detection chip may be used, which
conflicts with the native Tegra implementation.

Add extcon parsing from the linked USB controller. If such a property
exists, switch VBUS sensors to software mode and set their values to SET.
This indicates that the VBUS sensors are not required by the USB
controller, which uses extcon for detection instead.

This fixes all devices that have OTG mode set with extcon for Tegra20
(LG Optimus 2X P990), Tegra30 (LG Optimus 4X P880 and Vu P895),
Tegra114 (Nvidia Tegra Note 7), and Tegra124 (Xiaomi Mi Pad). All listed
devices were tested.

Assisted-by: Claude Sonnet 5
Signed-off-by: Jordan Viknar <jordanviknar@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
 drivers/usb/phy/phy-tegra-usb.c   | 55 +++++++++++++++++++++++++++++++
 include/linux/usb/tegra_usb_phy.h |  1 +
 2 files changed, 56 insertions(+)

diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c
index 00443a7beaeb0..d3faeb6619454 100644
--- a/drivers/usb/phy/phy-tegra-usb.c
+++ b/drivers/usb/phy/phy-tegra-usb.c
@@ -16,6 +16,7 @@
 #include <linux/iopoll.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/resource.h>
@@ -68,9 +69,18 @@
 #define   UHSIC_PHY_ENABLE			BIT(19)
 
 #define USB_PHY_VBUS_SENSORS			0x404
+#define   B_SESS_VLD_SW_EN			BIT(11)
+#define   B_SESS_VLD_SW_VALUE			BIT(12)
 #define   B_SESS_VLD_WAKEUP_EN			BIT(14)
+#define   A_SESS_VLD_SW_EN			BIT(19)
+#define   A_SESS_VLD_SW_VALUE			BIT(20)
 #define   A_SESS_VLD_WAKEUP_EN			BIT(22)
+#define   A_VBUS_VLD_SW_EN			BIT(27)
+#define   A_VBUS_VLD_SW_VALUE			BIT(28)
 #define   A_VBUS_VLD_WAKEUP_EN			BIT(30)
+#define VBUS_SENSORS_SW_OVERRIDE		(B_SESS_VLD_SW_EN | B_SESS_VLD_SW_VALUE | \
+						 A_SESS_VLD_SW_EN | A_SESS_VLD_SW_VALUE | \
+						 A_VBUS_VLD_SW_EN | A_VBUS_VLD_SW_VALUE)
 
 #define USB_PHY_VBUS_WAKEUP_ID			0x408
 #define   ID_INT_EN				BIT(0)
@@ -621,6 +631,10 @@ static int utmi_phy_power_on(struct tegra_usb_phy *phy)
 		val = readl_relaxed(base + USB_PHY_VBUS_SENSORS);
 		val &= ~(A_VBUS_VLD_WAKEUP_EN | A_SESS_VLD_WAKEUP_EN);
 		val &= ~(B_SESS_VLD_WAKEUP_EN);
+
+		if (phy->has_extcon)
+			val |= VBUS_SENSORS_SW_OVERRIDE;
+
 		writel_relaxed(val, base + USB_PHY_VBUS_SENSORS);
 
 		val = readl_relaxed(base + UTMIP_BAT_CHRG_CFG0);
@@ -727,6 +741,12 @@ static int utmi_phy_power_off(struct tegra_usb_phy *phy)
 					   val, !(val & VBUS_WAKEUP_STS),
 					   5000, 100000);
 
+	if (phy->has_extcon) {
+		val = readl_relaxed(base + USB_PHY_VBUS_SENSORS);
+		val &= ~VBUS_SENSORS_SW_OVERRIDE;
+		writel_relaxed(val, base + USB_PHY_VBUS_SENSORS);
+	}
+
 	utmi_phy_clk_disable(phy);
 
 	/* PHY won't resume if reset is asserted */
@@ -1456,6 +1476,34 @@ static int tegra_usb_phy_parse_pmc(struct device *dev,
 	return 0;
 }
 
+static int tegra_usb_phy_parse_controller(struct device *dev,
+					  struct tegra_usb_phy *phy)
+{
+	struct device_node *usb_node;
+	char *node_path;
+	u64 addr;
+	int ret;
+
+	ret = of_property_read_reg(dev->of_node, 0, &addr, NULL);
+	if (ret) {
+		dev_err(dev, "Failed to read reg entry 0: %d\n", ret);
+		return ret;
+	}
+
+	node_path = devm_kasprintf(dev, GFP_KERNEL, "/usb@%08llx", addr);
+	if (!node_path)
+		return -ENOMEM;
+
+	usb_node = of_find_node_by_path(node_path);
+	if (!usb_node)
+		return -ENODEV;
+
+	phy->has_extcon = of_property_present(usb_node, "extcon");
+	of_node_put(usb_node);
+
+	return 0;
+}
+
 static const struct tegra_phy_soc_config tegra20_soc_config = {
 	.utmi_pll_config_in_car_module = false,
 	.has_hostpc = false,
@@ -1552,6 +1600,13 @@ static int tegra_usb_phy_probe(struct platform_device *pdev)
 		return err;
 	}
 
+	if (tegra_phy->mode == USB_DR_MODE_OTG) {
+		err = tegra_usb_phy_parse_controller(&pdev->dev, tegra_phy);
+		if (err)
+			return dev_err_probe(&pdev->dev, err,
+					     "Failed to get controller\n");
+	}
+
 	tegra_phy->phy_type = of_usb_get_phy_mode(np);
 	switch (tegra_phy->phy_type) {
 	case USBPHY_INTERFACE_MODE_UTMI:
diff --git a/include/linux/usb/tegra_usb_phy.h b/include/linux/usb/tegra_usb_phy.h
index 6343f88df5de8..4bb20e39003ab 100644
--- a/include/linux/usb/tegra_usb_phy.h
+++ b/include/linux/usb/tegra_usb_phy.h
@@ -87,6 +87,7 @@ struct tegra_usb_phy {
 	bool wakeup_enabled;
 	bool pad_wakeup;
 	bool powered_on;
+	bool has_extcon;
 };
 
 #endif /* __TEGRA_USB_PHY_H */
-- 
2.53.0

Re: [PATCH v1 1/2] dt-bindings: usb: Move Tegra-specific Chipidea USB properties into a dedicated schema

[Rob Herring]

On Sun, Oct 04, 2026 at 07:52:03PM +0300, Svyatoslav Ryhel wrote:
> Move all Tegra-specific Chipidea devices and their properties into a
> dedicated schema file, by analogy with i.MX.

I don't really see the point given it is only 2 deprecated properties. 
Maybe those can be removed? Depends if they are deprecated and still 
used or deprecated and removed from .dts files years ago.

Rob

Re: [PATCH v1 1/2] dt-bindings: usb: Move Tegra-specific Chipidea USB properties into a dedicated schema

[Svyatoslav Ryhel]

вт, 27 жовт. 2026 р. о 00:29 Rob Herring <robh@kernel.org> пише:
>
> On Sun, Oct 04, 2026 at 07:52:03PM +0300, Svyatoslav Ryhel wrote:
> > Move all Tegra-specific Chipidea devices and their properties into a
> > dedicated schema file, by analogy with i.MX.
>
> I don't really see the point given it is only 2 deprecated properties.
> Maybe those can be removed? Depends if they are deprecated and still
> used or deprecated and removed from .dts files years ago.
>

The ci-hdrc-usb2.yaml schema contains properties that are not
applicable to Tegra, and conversely, Tegra-specific properties are not
applicable to qcom, nxp, nuvoton, etc.

The 'nvidia,needs-double-reset' property is required for Tegra20 and
Tegra30, and it is still actively in use, as you can see here [1]. Its
marked deprecated state appears to be incorrect, as it should simply
be restricted to Tegra20 and Tegra30.

The 'nvidia,phy' property is still used across all ARMv7 Tegra
generations + Tegra210, as the Chipidea driver has not yet been
converted to use the generic property. Therefore, while it is marked
as deprecated, it remains in active use.

The example I added is from Tegra30, which in the real devicetree uses
both properties, so I've included them here as well. With your
permission, I can remove the Tegra-specific parts from
ci-hdrc-usb2.yaml and tailor the proposed schema to better fit the
current state.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/arch/arm/boot/dts/nvidia/tegra30.dtsi?h=next-20261026#n1146

> Rob

Re: [PATCH v1 1/2] dt-bindings: usb: Move Tegra-specific Chipidea USB properties into a dedicated schema

[Rob Herring]

On Tue, Oct 27, 2026 at 10:51:52AM +0200, Svyatoslav Ryhel wrote:
> вт, 27 жовт. 2026 р. о 00:29 Rob Herring <robh@kernel.org> пише:
> >
> > On Sun, Oct 04, 2026 at 07:52:03PM +0300, Svyatoslav Ryhel wrote:
> > > Move all Tegra-specific Chipidea devices and their properties into a
> > > dedicated schema file, by analogy with i.MX.
> >
> > I don't really see the point given it is only 2 deprecated properties.
> > Maybe those can be removed? Depends if they are deprecated and still
> > used or deprecated and removed from .dts files years ago.
> >
> 
> The ci-hdrc-usb2.yaml schema contains properties that are not
> applicable to Tegra, and conversely, Tegra-specific properties are not
> applicable to qcom, nxp, nuvoton, etc.
> 
> The 'nvidia,needs-double-reset' property is required for Tegra20 and
> Tegra30, and it is still actively in use, as you can see here [1]. Its
> marked deprecated state appears to be incorrect, as it should simply
> be restricted to Tegra20 and Tegra30.
> 
> The 'nvidia,phy' property is still used across all ARMv7 Tegra
> generations + Tegra210, as the Chipidea driver has not yet been
> converted to use the generic property. Therefore, while it is marked
> as deprecated, it remains in active use.
> 
> The example I added is from Tegra30, which in the real devicetree uses
> both properties, so I've included them here as well. With your
> permission, I can remove the Tegra-specific parts from
> ci-hdrc-usb2.yaml and tailor the proposed schema to better fit the
> current state.

Okay, please add these details to the commit msg.

Rob