[PATCH V2 1/2] ARM: dts: imx6ull-dhcor-maveo-box: Remove unused SPI device

[PATCH V2 1/2] ARM: dts: imx6ull-dhcor-maveo-box: Remove unused SPI device

[Christoph Niedermaier]

On the maveo box, the SPI pins are connected to connector X10,
but no device is connected. The device "dhcom-board" was used
only to test the hardware, but was not removed afterward. So
remove this device to accurately represent the current hardware
configuration here. Also remove the okay status, since there
are no longer any devices defined in the interface.

Fixes: 145e2732a5e9 ("ARM: dts: imx6ull-dhcor: Add Marantec maveo box")
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
---
Cc: Rob Herring <robh@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Frank Li <Frank.Li@nxp.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Marek Vasut <marex@nabladev.com>
Cc: devicetree@vger.kernel.org
Cc: imx@lists.linux.dev
Cc: kernel@dh-electronics.com
Cc: linux-kernel@vger.kernel.org
---
V2: - Remove also okay status
---
 arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-maveo-box.dts | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-maveo-box.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-maveo-box.dts
index 047f7b2d8526..0b48de79c595 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-maveo-box.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-maveo-box.dts
@@ -59,15 +59,6 @@ &ecspi4 {
 	cs-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
 	pinctrl-0 = <&pinctrl_ecspi4>;
 	pinctrl-names = "default";
-	status = "okay";
-
-	spidev@0 {
-		compatible = "dh,dhcom-board";
-		reg = <0>;
-		spi-cpha;
-		spi-cpol;
-		spi-max-frequency = <54000000>;
-	};
 };
 
 &gpio1 {
-- 
2.30.2

[PATCH V2 2/2] ARM: dts: imx6ull-dhcor-maveo-box: Correct PCB number

[Christoph Niedermaier]

The PCB number of the maveo box isn't 525. Change the
number to the correct number, 625.

Fixes: 145e2732a5e9 ("ARM: dts: imx6ull-dhcor: Add Marantec maveo box")
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
---
Cc: Rob Herring <robh@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Frank Li <Frank.Li@nxp.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Marek Vasut <marex@nabladev.com>
Cc: devicetree@vger.kernel.org
Cc: imx@lists.linux.dev
Cc: kernel@dh-electronics.com
Cc: linux-kernel@vger.kernel.org
---
V2: - No changes
---
 arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-maveo-box.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-maveo-box.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-maveo-box.dts
index 0b48de79c595..0f900e58d8a4 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-maveo-box.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-maveo-box.dts
@@ -6,7 +6,7 @@
  * DHCOM iMX6ULL variant:
  * DHCR-iMX6ULL-C080-R051-SPI-WBT-I-01LG
  * DHCOR PCB number: 578-200 or newer
- * maveo box PCB number: 525-200 or newer
+ * maveo box PCB number: 625-200 or newer
  */
 
 /dts-v1/;
-- 
2.30.2

Re: [PATCH V2 2/2] ARM: dts: imx6ull-dhcor-maveo-box: Correct PCB number

[Marek Vasut]

On 10/27/26 12:12 PM, Christoph Niedermaier wrote:
> The PCB number of the maveo box isn't 525. Change the
> number to the correct number, 625.
> 
> Fixes: 145e2732a5e9 ("ARM: dts: imx6ull-dhcor: Add Marantec maveo box")
> Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Reviewed-by: Marek Vasut <marex@nabladev.com>

Re: [PATCH V2 1/2] ARM: dts: imx6ull-dhcor-maveo-box: Remove unused SPI device

[Marek Vasut]

On 10/27/26 12:12 PM, Christoph Niedermaier wrote:
> On the maveo box, the SPI pins are connected to connector X10,
> but no device is connected. The device "dhcom-board" was used
> only to test the hardware, but was not removed afterward. So
> remove this device to accurately represent the current hardware
> configuration here. Also remove the okay status, since there
> are no longer any devices defined in the interface.
> 
> Fixes: 145e2732a5e9 ("ARM: dts: imx6ull-dhcor: Add Marantec maveo box")
> Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Reviewed-by: Marek Vasut <marex@nabladev.com>