[PATCH net 0/5] net: dsa: b53: Preliminary fixes

[PATCH net 0/5] net: dsa: b53: Preliminary fixes

[Florian Fainelli]

This patch series contains fixes to issues reported by Sashiko on the
b53 PCS bug fixes being submitted, and then some more that came from
code review and testing.

Florian Fainelli (5):
  net: dsa: b53: initialize the jumbo frame size register offset
  net: dsa: b53: fix the SRAB grant timeout check
  net: dsa: b53: clear stale state when creating an ARL entry
  net: dsa: b53: reject conflicting mirror destinations
  net: dsa: b53: use the correct override register 2 Gbps bit

 drivers/net/dsa/b53/b53_common.c | 42 ++++++++++++++++++++++----------
 drivers/net/dsa/b53/b53_srab.c   |  2 +-
 2 files changed, 30 insertions(+), 14 deletions(-)

-- 
2.53.0

[PATCH net 1/5] net: dsa: b53: initialize the jumbo frame size register offset

[Florian Fainelli]

The chip data specifies both the jumbo port mask and frame size register
offsets, but b53_switch_init() only copies the former into the device.
Since the device is zero-initialized, b53_set_jumbo() writes the frame
size to offset zero instead of the chip-specific size register at 0x05
or 0x08.

Copy jumbo_size_reg from the chip data along with jumbo_pm_reg so frame
size updates reach the intended register.

Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
---
 drivers/net/dsa/b53/b53_common.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 0880310c9ce3..559d4b360c82 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -3109,6 +3109,7 @@ static int b53_switch_init(struct b53_device *dev)
 			dev->vta_regs[1] = chip->vta_regs[1];
 			dev->vta_regs[2] = chip->vta_regs[2];
 			dev->jumbo_pm_reg = chip->jumbo_pm_reg;
+			dev->jumbo_size_reg = chip->jumbo_size_reg;
 			dev->imp_port = chip->imp_port;
 			dev->num_vlans = chip->vlans;
 			dev->num_arl_bins = chip->arl_bins;
-- 
2.53.0

[PATCH net 2/5] net: dsa: b53: fix the SRAB grant timeout check

[Florian Fainelli]

b53_srab_request_grant() polls for a grant up to 20 times, but checks for
an iteration count of five to detect a timeout. This rejects a grant
received on the sixth poll and reports success when all 20 polls finish
without a grant. The latter allows a register access to proceed without
ownership of the switch resources.

Check for exhaustion of all 20 iterations instead.

Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
---
 drivers/net/dsa/b53/b53_srab.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/dsa/b53/b53_srab.c b/drivers/net/dsa/b53/b53_srab.c
index 83a03fca142a..f4689078ccd5 100644
--- a/drivers/net/dsa/b53/b53_srab.c
+++ b/drivers/net/dsa/b53/b53_srab.c
@@ -105,7 +105,7 @@ static int b53_srab_request_grant(struct b53_device *dev)
 			break;
 		usleep_range(10, 100);
 	}
-	if (WARN_ON(i == 5))
+	if (WARN_ON(i == 20))
 		return -EIO;
 
 	return 0;
-- 
2.53.0

[PATCH net 3/5] net: dsa: b53: clear stale state when creating an ARL entry

[Florian Fainelli]

When an ARL lookup does not find the requested MAC and VID, b53_arl_read()
returns the first free bin index but leaves the entry populated with the
last bin examined. The multicast add path then ORs the requested port into
that unrelated entry's forwarding bitmap, potentially forwarding packets
to ports which are not members of the multicast group.

Clear the entry before creating a new one. Also return without writing
anything when deleting an entry which is not present, instead of making
a new entry from stale bin contents.

Fixes: 5d65b64a3d97 ("net: dsa: b53: Add support for MDB")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
---
 drivers/net/dsa/b53/b53_common.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 559d4b360c82..0871a10d8cbc 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1992,6 +1992,10 @@ static int b53_arl_op(struct b53_device *dev, int op, int port,
 			addr, vid);
 		return is_valid ? ret : 0;
 	case -ENOENT:
+		if (!is_valid)
+			return 0;
+
+		memset(&ent, 0, sizeof(ent));
 		/* We could not find a matching MAC, so reset to a new entry */
 		dev_dbg(dev->dev, "{%pM,%.4d} not found, using idx: %d\n",
 			addr, vid, idx);
-- 
2.53.0

[PATCH net 4/5] net: dsa: b53: reject conflicting mirror destinations

[Florian Fainelli]

The mirror capture control register selects one destination for all
ingress and egress mirror sources. Adding a rule for a different capture
port currently overwrites that field and silently redirects all existing
mirror rules.

Read the capture control before changing any source masks and reject a
different destination while mirroring is enabled. Return an extack which
describes the hardware limitation, and propagate a failed capture-control
read rather than making the decision from uninitialized data.

Clear the capture-port field when the final source is removed so a later
rule can select a new destination.

Fixes: ed3af5fd08eb ("net: dsa: b53: Add support for port mirroring")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
---
 drivers/net/dsa/b53/b53_common.c | 29 +++++++++++++++++++----------
 1 file changed, 19 insertions(+), 10 deletions(-)

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 0871a10d8cbc..b8a7b380bac8 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -2543,7 +2543,19 @@ int b53_mirror_add(struct dsa_switch *ds, int port,
 		   struct netlink_ext_ack *extack)
 {
 	struct b53_device *dev = ds->priv;
-	u16 reg, loc;
+	u16 reg, loc, cap_ctl;
+	int ret;
+
+	ret = b53_read16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, &cap_ctl);
+	if (ret)
+		return ret;
+
+	if ((cap_ctl & MIRROR_EN) &&
+	    (cap_ctl & CAP_PORT_MASK) != mirror->to_local_port) {
+		NL_SET_ERR_MSG_MOD(extack,
+				   "Only one mirroring destination is supported");
+		return -EOPNOTSUPP;
+	}
 
 	if (ingress)
 		loc = B53_IG_MIR_CTL;
@@ -2554,11 +2566,10 @@ int b53_mirror_add(struct dsa_switch *ds, int port,
 	reg |= BIT(port);
 	b53_write16(dev, B53_MGMT_PAGE, loc, reg);
 
-	b53_read16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, &reg);
-	reg &= ~CAP_PORT_MASK;
-	reg |= mirror->to_local_port;
-	reg |= MIRROR_EN;
-	b53_write16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, reg);
+	cap_ctl &= ~CAP_PORT_MASK;
+	cap_ctl |= mirror->to_local_port;
+	cap_ctl |= MIRROR_EN;
+	b53_write16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, cap_ctl);
 
 	return 0;
 }
@@ -2595,10 +2606,8 @@ void b53_mirror_del(struct dsa_switch *ds, int port,
 
 	b53_read16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, &reg);
 	/* Both no longer have ports, let's disable mirroring */
-	if (loc_disable && other_loc_disable) {
-		reg &= ~MIRROR_EN;
-		reg &= ~mirror->to_local_port;
-	}
+	if (loc_disable && other_loc_disable)
+		reg &= ~(MIRROR_EN | CAP_PORT_MASK);
 	b53_write16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, reg);
 }
 EXPORT_SYMBOL(b53_mirror_del);
-- 
2.53.0

[PATCH net 5/5] net: dsa: b53: use the correct override register 2 Gbps bit

[Florian Fainelli]

The IMP and per-port GMII override registers swap the override-enable and 2
Gbps speed bits. Using the IMP speed bit on a GMII port clears its override
enable and leaves any previous 2 Gbps selection intact. Select the speed
bit alongside the register and enable bit so lower speeds clear the correct
bit and 2 Gbps sets it.

Fixes: b6a8a5477fe9 ("net: dsa: b53: fix resetting speed and pause on forced link")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
---
 drivers/net/dsa/b53/b53_common.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index b8a7b380bac8..7bbbfcd611e1 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1370,17 +1370,19 @@ static void b53_force_port_config(struct b53_device *dev, int port,
 				  int speed, int duplex,
 				  bool tx_pause, bool rx_pause)
 {
-	u8 reg, val, off;
+	u8 reg, val, off, speed2000;
 
 	/* Override the port settings */
 	if (port == dev->imp_port) {
 		off = B53_PORT_OVERRIDE_CTRL;
 		val = PORT_OVERRIDE_EN;
+		speed2000 = PORT_OVERRIDE_SPEED_2000M;
 	} else if (is5325(dev)) {
 		return;
 	} else {
 		off = B53_GMII_PORT_OVERRIDE_CTRL(port);
 		val = GMII_PO_EN;
+		speed2000 = GMII_PO_SPEED_2000M;
 	}
 
 	b53_read8(dev, B53_CTRL_PAGE, off, &reg);
@@ -1392,11 +1394,11 @@ static void b53_force_port_config(struct b53_device *dev, int port,
 
 	reg &= ~(0x3 << GMII_PO_SPEED_S);
 	if (is5301x(dev) || is58xx(dev))
-		reg &= ~PORT_OVERRIDE_SPEED_2000M;
+		reg &= ~speed2000;
 
 	switch (speed) {
 	case 2000:
-		reg |= PORT_OVERRIDE_SPEED_2000M;
+		reg |= speed2000;
 		fallthrough;
 	case SPEED_1000:
 		reg |= PORT_OVERRIDE_SPEED_1000M;
-- 
2.53.0

Re: [PATCH net 0/5] net: dsa: b53: Preliminary fixes

[netdev-bot+sinfo]

Hi!

This is an automated message. This series looks like a fix, but its
commit messages seem to be missing some information:

 - Whether the issue was actually triggered, or is only theoretical
   (e.g. found by code inspection). If it was triggered please include
   the symptoms, like the stack trace or error messages.

Please do not repost the series just to address the above. Instead,
reply to this email with the missing information, so that reviewers
can take it into account. If the series needs another revision for
other reasons, please include the information in the commit messages
then.

The evaluation is done by an LLM so it may be wrong, if you think
that is the case please reply and explain.

Re: [PATCH net 0/5] net: dsa: b53: Preliminary fixes

[Florian Fainelli]

On 10/27/26 13:26, netdev-bot+sinfo@kernel.org wrote:
> Hi!
> 
> This is an automated message. This series looks like a fix, but its
> commit messages seem to be missing some information:
> 
>   - Whether the issue was actually triggered, or is only theoretical
>     (e.g. found by code inspection). If it was triggered please include
>     the symptoms, like the stack trace or error messages.
> 
> Please do not repost the series just to address the above. Instead,
> reply to this email with the missing information, so that reviewers
> can take it into account. If the series needs another revision for
> other reasons, please include the information in the commit messages
> then.
> 
> The evaluation is done by an LLM so it may be wrong, if you think
> that is the case please reply and explain.

Except for issue #2, all of the other issues did trigger in testing and 
needed to be corrected.
-- 
Florian