From: Rob Herring <robh@kernel.org>
To: Navid Ghahremani <ghahramani.navid@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org, arnd@arndb.de,
stefandoesinger@gmail.com, krzk@kernel.org,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@kernel.org>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
netdev@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 17/24] dt-bindings: net: Add ZTE ZX279128S Ethernet switch
Date: Tue, 27 Oct 2026 16:48:30 -0500 [thread overview]
Message-ID: <20261027214830.GA1267186-robh@kernel.org> (raw)
In-Reply-To: <20261014072109.1759502-18-ghahramani.navid@gmail.com>
On Wed, Oct 14, 2026 at 08:20:57AM +0100, Navid Ghahremani wrote:
> Describe the switch, receive interrupt and per-port PHY modes and MAC
> addresses.
>
> Signed-off-by: Navid Ghahremani <ghahramani.navid@gmail.com>
> ---
> .../bindings/net/zte,zx279128s-gmac.yaml | 125 ++++++++++++++++++
> 1 file changed, 125 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/zte,zx279128s-gmac.yaml
>
> diff --git a/Documentation/devicetree/bindings/net/zte,zx279128s-gmac.yaml b/Documentation/devicetree/bindings/net/zte,zx279128s-gmac.yaml
> new file mode 100644
> index 0000000000..fcbdbafa76
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/zte,zx279128s-gmac.yaml
> @@ -0,0 +1,125 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/zte,zx279128s-gmac.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ZTE zx279128s Ethernet switch
> +
> +maintainers:
> + - Navid Ghahremani <ghahramani.navid@gmail.com>
> +
> +description:
> + The ZTE zx279128s has a five-port gigabit Ethernet switch with a traffic
> + manager, a buffer manager and a DMA engine that connects it to the CPU.
> + Each port is described by a child node of ethernet-ports and becomes its
> + own network interface, with the MAC address given in that node.
> +
Use the ethernet-switch.yaml schema here.
> +properties:
> + compatible:
> + const: zte,zx279128s-gmac
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> + description: The traffic manager's interrupt, which signals frames
> + received for the CPU.
> +
> + ethernet-ports:
> + type: object
> + additionalProperties: false
> +
> + properties:
> + '#address-cells':
> + const: 1
> + '#size-cells':
> + const: 0
> +
> + patternProperties:
> + "^port@[0-4]$":
ethernet-port is preferred for new bindings.
Rob
next prev parent reply other threads:[~2026-10-27 21:48 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20261014072109.1759502-1-ghahramani.navid@gmail.com>
2026-10-14 7:20 ` [PATCH v2 01/24] MAINTAINERS: Consolidate ARM/ZTE ZX SOC SUPPORT with Stefan Doesinger Navid Ghahremani
2026-10-14 20:11 ` Stefan Dösinger
2026-10-14 7:20 ` [PATCH v2 02/24] dt-bindings: arm: Add ZTE ZX279128S platform descriptions Navid Ghahremani
2026-10-27 21:30 ` Rob Herring (Arm)
2026-10-14 7:20 ` [PATCH v2 03/24] ARM: zte: Add ZX279128S platform and CPU hotplug support Navid Ghahremani
2026-10-14 7:20 ` [PATCH v2 04/24] dt-bindings: clock: Add ZTE ZX279128S CRM clock bindings Navid Ghahremani
2026-10-14 21:48 ` Stefan Dösinger
2026-10-15 9:25 ` Krzysztof Kozlowski
2026-10-15 9:26 ` Krzysztof Kozlowski
2026-10-14 7:20 ` [PATCH v2 05/24] dt-bindings: reset: Add ZTE ZX279128S reset controller bindings Navid Ghahremani
2026-10-15 9:27 ` Krzysztof Kozlowski
2026-10-14 7:20 ` [PATCH v2 06/24] clk: zte: Add ZX279128S CRM clock and reset driver Navid Ghahremani
2026-10-14 13:21 ` Philipp Zabel
2026-10-14 19:39 ` Stefan Dösinger
2026-10-14 7:20 ` [PATCH v2 07/24] dt-bindings: gpio: Add ZTE ZX279128S GPIO controller Navid Ghahremani
2026-10-27 21:31 ` Rob Herring (Arm)
2026-10-14 7:20 ` [PATCH v2 08/24] gpio: Add ZTE ZX279128S GPIO driver Navid Ghahremani
2026-10-14 21:11 ` Stefan Dösinger
2026-10-15 12:25 ` Bartosz Golaszewski
2026-10-14 7:20 ` [PATCH v2 09/24] dt-bindings: pinctrl: pinctrl-single: Add ZTE ZX279128S pin mux Navid Ghahremani
2026-10-17 16:20 ` Krzysztof Kozlowski
2026-10-14 7:20 ` [PATCH v2 10/24] dt-bindings: phy: Add ZTE ZX279128S PCIe PHY binding Navid Ghahremani
2026-10-15 9:29 ` Krzysztof Kozlowski
2026-10-14 7:20 ` [PATCH v2 11/24] phy: zte: Add ZTE ZX279128S PCIe PHY driver Navid Ghahremani
2026-10-14 7:20 ` [PATCH v2 12/24] dt-bindings: PCI: Add ZTE ZX279128S host controller Navid Ghahremani
2026-10-27 21:40 ` Rob Herring
2026-10-14 7:20 ` [PATCH v2 13/24] PCI: dwc: Add ZTE ZX279128S host controller driver Navid Ghahremani
2026-10-14 13:19 ` Bjorn Helgaas
2026-10-14 21:06 ` Stefan Dösinger
2026-10-14 7:20 ` [PATCH v2 14/24] dt-bindings: net: Add ZTE ZX279128S MDIO controller Navid Ghahremani
2026-10-27 21:34 ` Rob Herring (Arm)
2026-10-14 7:20 ` [PATCH v2 15/24] net: mdio: " Navid Ghahremani
2026-10-14 12:13 ` Andrew Lunn
2026-10-14 7:20 ` [PATCH v2 16/24] net: phy: Add Sanechips ZX5201 PHY support Navid Ghahremani
2026-10-14 12:37 ` Andrew Lunn
2026-10-14 7:20 ` [PATCH v2 17/24] dt-bindings: net: Add ZTE ZX279128S Ethernet switch Navid Ghahremani
2026-10-27 21:48 ` Rob Herring [this message]
2026-10-14 7:20 ` [PATCH v2 18/24] net: ethernet: zte: Add ZX279128S Ethernet switch driver Navid Ghahremani
2026-10-14 7:20 ` [PATCH v2 19/24] dt-bindings: spi: Add ZTE ZX family SPI flash controller binding Navid Ghahremani
2026-10-14 20:33 ` Stefan Dösinger
2026-10-15 9:35 ` Krzysztof Kozlowski
2026-10-15 9:36 ` Krzysztof Kozlowski
2026-10-14 7:21 ` [PATCH v2 20/24] spi: zx: Add ZTE ZX family SPI flash controller driver Navid Ghahremani
2026-10-14 19:28 ` Stefan Dösinger
2026-10-15 9:34 ` Krzysztof Kozlowski
2026-10-15 14:29 ` kernel test robot
2026-10-19 12:15 ` Stefan Dösinger
2026-10-14 7:21 ` [PATCH v2 21/24] dt-bindings: usb: Add ZTE ZX279128S DWC3 controller Navid Ghahremani
2026-10-14 7:21 ` [PATCH v2 22/24] usb: dwc3: generic-plat: Add ZTE ZX279128S Navid Ghahremani
2026-10-14 7:21 ` [PATCH v2 23/24] ARM: dts: zte: Add ZX279128S SoC description Navid Ghahremani
2026-10-14 7:21 ` [PATCH v2 24/24] ARM: dts: zte: Add ZTE ZXHN H3600 board Navid Ghahremani
2026-10-14 12:52 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261027214830.GA1267186-robh@kernel.org \
--to=robh@kernel.org \
--cc=andrew+netdev@lunn.ch \
--cc=arnd@arndb.de \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@kernel.org \
--cc=ghahramani.navid@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=krzk@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=stefandoesinger@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®