[PATCH v2 2/9] media: i2c: ov7251: Fix link frequency index

[Antoine Pichot <antoine.pichot@gmail.com>]

ov7251_check_hwcfg() stores i, the index into the firmware's
link_frequencies array, in link_freq_idx, which the driver then uses to
index its own link_freq[], pixel_rates[] and pll1[] tables. The matching
driver entry is j. Store j.

Observed on a Surface Book 2, where ipu-bridge lists one link frequency,
319.2 MHz, which is link_freq[1]: V4L2_CID_LINK_FREQ reads 240000000,
and the pixel rate and PLL registers are off the same way.

The 319.2 MHz table this selects ran its PLL outside the datasheet
range until the previous patch, so do not apply this fix without it.

Fixes: cc125aaa5a78 ("media: i2c: Provide ov7251_check_hwcfg()")
Cc: stable@vger.kernel.org
Signed-off-by: Antoine Pichot <antoine.pichot@gmail.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
---
 drivers/media/i2c/ov7251.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/i2c/ov7251.c b/drivers/media/i2c/ov7251.c
index f429de5f1f7c..1f30a01c85b3 100644
--- a/drivers/media/i2c/ov7251.c
+++ b/drivers/media/i2c/ov7251.c
@@ -1523,7 +1523,7 @@ static int ov7251_check_hwcfg(struct ov7251 *ov7251)
 		goto out_free_bus_cfg;
 	}
 
-	ov7251->link_freq_idx = i;
+	ov7251->link_freq_idx = j;
 
 out_free_bus_cfg:
 	v4l2_fwnode_endpoint_free(&bus_cfg);
-- 
2.56.0