[PATCH 3/5] arm64: dts: qcom: milos-nothing-asteroids: Enable WiFi

[Alexander Koskovich <akoskovich@pm.me>]

Configure and enable the WiFi node, and add the required pinctrl to
provide the sleep clock from the PMK8550 (PMK7635) to WCN6755.

Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
---
 arch/arm64/boot/dts/qcom/milos-nothing-asteroids.dts | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/milos-nothing-asteroids.dts b/arch/arm64/boot/dts/qcom/milos-nothing-asteroids.dts
index 68b500bd4c3f..7d8afe8e95d5 100644
--- a/arch/arm64/boot/dts/qcom/milos-nothing-asteroids.dts
+++ b/arch/arm64/boot/dts/qcom/milos-nothing-asteroids.dts
@@ -141,7 +141,7 @@ wcn6750-pmu {
 
 		clocks = <&rpmhcc RPMH_RF_CLK1>;
 
-		pinctrl-0 = <&bluetooth_enable_default>;
+		pinctrl-0 = <&bluetooth_enable_default>, <&pmk8550_sleep_clk_default>;
 		pinctrl-names = "default";
 
 		regulators {
@@ -916,6 +916,17 @@ &pmiv0104_eusb2_repeater {
 	qcom,tune-usb2-preem = /bits/ 8 <0x6>;
 };
 
+&pmk8550_gpios {
+	pmk8550_sleep_clk_default: sleep-clk-default-state {
+		pins = "gpio5";
+		function = PMIC_GPIO_FUNC_FUNC1;
+		input-disable;
+		output-enable;
+		bias-disable;
+		power-source = <0>;
+	};
+};
+
 &pmr735b_gpios {
 	s1j_enable_default: s1j-enable-default-state {
 		pins = "gpio1";
@@ -1142,3 +1153,9 @@ &usb_1_hsphy {
 
 	status = "okay";
 };
+
+&wifi {
+	qcom,calibration-variant = "Nothing_Phone_3a";
+
+	status = "okay";
+};

-- 
2.55.0