[PATCH] media: qcom: camss: vfe: Clear active buffer pointers after flushing

[Loic Poulain <loic.poulain@oss.qualcomm.com>]

vfe_flush_buffers() returns all active buffers to vb2 but it leaves
output->buf[0] and output->buf[1] pointing to the completed buffers
despite the lost of ownership.

This can lead to subsequent flush or completion paths operating on
stale state and potentially completing the same buffer more than once.

Clear the buffer pointers explicitly.

Note: vfe_enable_output_v2 is supposed to overwrite those pointers with
pending buffers when streaming is restarted, but nothing guarantees that
enough pending buffers will be available to overwrite all entries.

Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/bug/linux-e617a776-3d96-47cb-8d60-a769340c25a7
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Fixes: 4c98a5f57f90 ("media: camss: Add VFE files")
---
 arch/arm64/boot/dts/qcom/monaco-pmics.dtsi    | 2 ++
 drivers/media/platform/qcom/camss/camss-vfe.c | 8 ++++++--
 2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/monaco-pmics.dtsi b/arch/arm64/boot/dts/qcom/monaco-pmics.dtsi
index 361f5163b6d91eef794d3bf86b374d4dcbc6d60f..1ed4de00b1a3e23e1ef0f1c412a2e29bf840c870 100644
--- a/arch/arm64/boot/dts/qcom/monaco-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/monaco-pmics.dtsi
@@ -58,6 +58,7 @@ pmm8620au_0_adc: adc@8000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#io-channel-cells = <1>;
+			#thermal-sensor-cells = <1>;
 
 			channel@3 {
 				reg = <ADC5_GEN3_DIE_TEMP(0)>;
@@ -112,6 +113,7 @@ pmm8650au_1_adc: adc@8000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#io-channel-cells = <1>;
+			#thermal-sensor-cells = <1>;
 
 			channel@203 {
 				reg = <ADC5_GEN3_DIE_TEMP(2)>;
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
index 2680a9914765fa2c8f3c2b38a5f4f0e0bcf4d873..8e297e2bcafcbf30b09fc2ad6e57f484a4e41898 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe.c
@@ -1187,11 +1187,15 @@ int vfe_flush_buffers(struct camss_video *vid,
 
 	vfe_buf_flush_pending(output, state);
 
-	if (output->buf[0])
+	if (output->buf[0]) {
 		vb2_buffer_done(&output->buf[0]->vb.vb2_buf, state);
+		output->buf[0] = NULL;
+	}
 
-	if (output->buf[1])
+	if (output->buf[1]) {
 		vb2_buffer_done(&output->buf[1]->vb.vb2_buf, state);
+		output->buf[1] = NULL;
+	}
 
 	if (output->last_buffer) {
 		vb2_buffer_done(&output->last_buffer->vb.vb2_buf, state);

---
base-commit: f1ac44c32cba88ad65dcecd4a279661d14e93651
change-id: 20261030-camss-fix-4972697ef90e

Best regards,
-- 
Loic Poulain <loic.poulain@oss.qualcomm.com>