[PATCH] wifi: ath12k: fix wrong register read for RU start index of 80_3 segment

[PATCH] wifi: ath12k: fix wrong register read for RU start index of 80_3 segment

[Jose Ignacio Tornos Martinez]

The RU start index for the fourth 80 MHz segment (80_3) is read from
rx_usr_info->info2 instead of rx_usr_info->info3. The bitmask used
(HAL_RX_USR_INFO3_RU_START_IDX_80_3) is correct for info3, so applying
it to info2 extracts garbage bits, producing an out-of-range shift
exponent that triggers a UBSAN splat:

  UBSAN: shift-out-of-bounds in drivers/net/wireless/ath/ath12k/wifi7/dp_mon.c:302:22
  shift exponent 284 is too large for 64-bit type 'long long unsigned int'
  Call Trace:
   ath12k_wifi7_dp_mon_hal_rx_parse_user_info.cold+0x3a/0xef7 [ath12k_wifi7]
   ath12k_wifi7_dp_mon_rx_parse_status_tlv+0x621/0x990 [ath12k_wifi7]
   ath12k_wifi7_dp_mon_parse_rx_dest+0xa9/0x2b0 [ath12k_wifi7]
   ath12k_wifi7_dp_mon_srng_process+0x34f/0x560 [ath12k_wifi7]
   ath12k_wifi7_dp_mon_process_ring+0x205/0x270 [ath12k_wifi7]
   ath12k_wifi7_dp_service_srng+0x1b4/0x5e0 [ath12k_wifi7]
   ath12k_pci_ext_grp_napi_poll+0x43/0x100 [ath12k]

Read from the suitable info (in this case info3) like the other three
segments do.

Fixes: 5db19c488413 ("wifi: ath12k: Move MU user processing to Wi-Fi 7 module")
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
---
 drivers/net/wireless/ath/ath12k/wifi7/dp_mon.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath12k/wifi7/dp_mon.c b/drivers/net/wireless/ath/ath12k/wifi7/dp_mon.c
index 1e29c13ad66d..0e69d9fe138b 100644
--- a/drivers/net/wireless/ath/ath12k/wifi7/dp_mon.c
+++ b/drivers/net/wireless/ath/ath12k/wifi7/dp_mon.c
@@ -293,7 +293,7 @@ ath12k_wifi7_dp_mon_hal_rx_parse_user_info(const struct hal_receive_user_info *r
 	}
 
 	ru_type_80_3 = le32_get_bits(rx_usr_info->info2, HAL_RX_USR_INFO2_RU_TYPE_80_3);
-	ru_start_index_80_3 = le32_get_bits(rx_usr_info->info2,
+	ru_start_index_80_3 = le32_get_bits(rx_usr_info->info3,
 					    HAL_RX_USR_INFO3_RU_START_IDX_80_3);
 	if (ru_type_80_3 != HAL_EHT_RU_NONE) {
 		ru_size += ru_type_80_3;
-- 
2.56.0

Re: [PATCH] wifi: ath12k: fix wrong register read for RU start index of 80_3 segment

[Tamizh Raja]

On Fri, Oct 30, 2026 at 2:39 PM Jose Ignacio Tornos Martinez
<jtornosm@redhat.com> wrote:
>
> The RU start index for the fourth 80 MHz segment (80_3) is read from
> rx_usr_info->info2 instead of rx_usr_info->info3. The bitmask used
> (HAL_RX_USR_INFO3_RU_START_IDX_80_3) is correct for info3, so applying
> it to info2 extracts garbage bits, producing an out-of-range shift
> exponent that triggers a UBSAN splat:
>
>   UBSAN: shift-out-of-bounds in drivers/net/wireless/ath/ath12k/wifi7/dp_mon.c:302:22
>   shift exponent 284 is too large for 64-bit type 'long long unsigned int'
>   Call Trace:
>    ath12k_wifi7_dp_mon_hal_rx_parse_user_info.cold+0x3a/0xef7 [ath12k_wifi7]
>    ath12k_wifi7_dp_mon_rx_parse_status_tlv+0x621/0x990 [ath12k_wifi7]
>    ath12k_wifi7_dp_mon_parse_rx_dest+0xa9/0x2b0 [ath12k_wifi7]
>    ath12k_wifi7_dp_mon_srng_process+0x34f/0x560 [ath12k_wifi7]
>    ath12k_wifi7_dp_mon_process_ring+0x205/0x270 [ath12k_wifi7]
>    ath12k_wifi7_dp_service_srng+0x1b4/0x5e0 [ath12k_wifi7]
>    ath12k_pci_ext_grp_napi_poll+0x43/0x100 [ath12k]
>
> Read from the suitable info (in this case info3) like the other three
> segments do.
>
> Fixes: 5db19c488413 ("wifi: ath12k: Move MU user processing to Wi-Fi 7 module")
> Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>

Reviewed-by: Tamizh Chelvam Raja <tamizh.raja@oss.qualcomm.com>