From: Dario Binacchi <dario.binacchi@amarulasolutions.com>
To: linux-kernel@vger.kernel.org
Cc: michael@amarulasolutions.com, linux-amarula@amarulasolutions.com,
Dario Binacchi <dario.binacchi@amarulasolutions.com>,
Conor Dooley <conor+dt@kernel.org>,
Fabio Estevam <festevam@gmail.com>, Frank Li <Frank.Li@nxp.com>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Rob Herring <robh@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
devicetree@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/5] arm64: dts: freescale: support Engicam i.Core MX8M Plus FE SoM
Date: Fri, 30 Oct 2026 17:35:42 +0100 [thread overview]
Message-ID: <20261030163547.2682583-4-dario.binacchi@amarulasolutions.com> (raw)
In-Reply-To: <20261030163547.2682583-1-dario.binacchi@amarulasolutions.com>
Support Engicam i.Core MX8M Plus Fast Ethernet SoM, a variant of the
i.Core MX8M Plus SoM which embeds a SMSC LAN8710 10/100 Ethernet PHY
connected to the EQOS controller in RMII mode.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---
.../dts/freescale/imx8mp-icore-mx8mp-fe.dtsi | 62 +++++++++++++++++++
1 file changed, 62 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-fe.dtsi
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-fe.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-fe.dtsi
new file mode 100644
index 000000000000..1341de0ba4b5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-fe.dtsi
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2026 Amarula Solutions, Dario Binacchi <dario.binacchi@amarulasolutions.com>
+ * Copyright (C) 2026 Engicam srl
+ */
+
+#include "imx8mp-icore-mx8mp.dtsi"
+
+/ {
+ compatible = "engicam,icore-mx8mp-fe", "fsl,imx8mp";
+};
+
+&eqos {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_eqos>;
+ phy-handle = <ðphy0>;
+ phy-mode = "rmii";
+ snps,force_thresh_dma_mode;
+ snps,rmii_refclk_ext;
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 { /* SMSC LAN8710 */
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ethphy0>;
+ reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <500>;
+ reset-deassert-us = <500>;
+ smsc,disable-energy-detect;
+ };
+ };
+};
+
+&iomuxc {
+ pinctrl_eqos: eqosgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3
+ MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3
+ MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x12
+ MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x12
+ MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x12
+ /* RMII reference clock input, provided by the SoM */
+ MX8MP_IOMUXC_ENET_TD2__CCM_ENET_QOS_CLOCK_GENERATE_REF_CLK 0x12
+ MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x1d0
+ MX8MP_IOMUXC_ENET_RXC__ENET_QOS_RX_ER 0x91
+ MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x1d0
+ MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x1d0
+ >;
+ };
+
+ pinctrl_ethphy0: ethphy0grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ENET_RD3__GPIO1_IO29 0x16
+ >;
+ };
+};
--
2.43.0
next prev parent reply other threads:[~2026-10-30 16:35 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-30 16:35 [PATCH 0/5] arm64: support Engicam i.Core MX8M Plus FE C.TOUCH 2.0 board Dario Binacchi
2026-10-30 16:35 ` [PATCH 1/5] arm64: dts: imx8mp-icore-mx8mp: enable the watchdog Dario Binacchi
2026-10-30 16:35 ` [PATCH 2/5] dt-bindings: arm: fsl: support Engicam i.Core MX8M Plus FE C.TOUCH 2.0 board Dario Binacchi
2026-10-30 16:35 ` Dario Binacchi [this message]
2026-10-30 16:35 ` [PATCH 4/5] arm64: dts: freescale: " Dario Binacchi
2026-10-30 16:35 ` [PATCH 5/5] arm64: dts: freescale: add Engicam C.TOUCH 2.0 LVDS display overlay Dario Binacchi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261030163547.2682583-4-dario.binacchi@amarulasolutions.com \
--to=dario.binacchi@amarulasolutions.com \
--cc=Frank.Li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-amarula@amarulasolutions.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michael@amarulasolutions.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®