* [PATCH] dt-bindings: mfd: bq25703a: fix input current limit default
@ 2026-11-01 8:57 Jun Yan
0 siblings, 0 replies; only message in thread
From: Jun Yan @ 2026-11-01 8:57 UTC (permalink / raw)
To: Lee Jones, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Chris Morgan
Cc: Jun Yan, Krzysztof Kozlowski, mfd, devicetree, linux-kernel
Section 8.6.6.1 "Input Current Registers" of the BQ25703A datasheet
states that "The default current limit is 3.3 A", while the binding
documents 3.25 A.
Use the documented value. It also matches BQ25703_IINDPM_DEFAULT_UA,
which the driver falls back to when input-current-limit-microamp is
absent, so the binding and the driver now agree.
Fixes: 76bc2203a46e ("dt-bindings: mfd: ti,bq25703a: Add TI BQ25703A Charger")
Link: https://www.ti.com/lit/ds/symlink/bq25703a.pdf
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
---
Documentation/devicetree/bindings/mfd/ti,bq25703a.yaml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/mfd/ti,bq25703a.yaml b/Documentation/devicetree/bindings/mfd/ti,bq25703a.yaml
index 3bc07f25d063..607873e270b4 100644
--- a/Documentation/devicetree/bindings/mfd/ti,bq25703a.yaml
+++ b/Documentation/devicetree/bindings/mfd/ti,bq25703a.yaml
@@ -88,7 +88,7 @@ allOf:
input-current-limit-microamp:
minimum: 50000
maximum: 6400000
- default: 3250000
+ default: 3300000
regulators:
properties:
vbus:
--
2.56.0
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2026-11-01 8:58 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-11-01 8:57 [PATCH] dt-bindings: mfd: bq25703a: fix input current limit default Jun Yan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®