mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH] fuse: ignore FUSE_ATTR_DAX unless a dax backing is possible
@ 2026-11-02 12:56 Joas Antonio dos Santos via B4 Relay
  0 siblings, 0 replies; only message in thread
From: Joas Antonio dos Santos via B4 Relay @ 2026-11-02 12:56 UTC (permalink / raw)
  To: Miklos Szeredi
  Cc: Miklos Szeredi, fuse-devel, linux-kernel, Joas Antonio dos Santos

From: Joas Antonio dos Santos <joasantonio108@gmail.com>

fuse_init_inode() trusts FUSE_ATTR_DAX from any server: it sets S_DAX and
switches the mapping to fuse_dax_aops, which has no ->read_folio and no
->readahead.  The open path only refuses such an inode without
FOPEN_PASSTHROUGH through an IS_DAX() check in fuse_file_io_open().

With CONFIG_FS_DAX=n, S_DAX is 0, so IS_DAX() is always false and that
check compiles away.  The file is opened for normal cached I/O on a
mapping without ->read_folio, and the first read() calls a NULL
function pointer from read_pages():

  Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
  pc : 0x0
  lr : read_pages+0x5b4/0x830
   page_cache_ra_order
   page_cache_sync_ra
   filemap_get_pages
   filemap_read
   generic_file_read_iter
   fuse_file_read_iter

Any server can do this, including an unprivileged one mounted through
fusermount3 or in a user namespace: answer LOOKUP of a regular file with
FUSE_ATTR_DAX set and a normal OPEN.  mmap() of the file reaches the same
NULL ->read_folio through filemap_fault().

As the commit adding it says, FUSE_ATTR_DAX is only meant to be used
with FUSE_PASSTHROUGH_V2 and a dax device backing, which needs FS_DAX.
Only honour it in that case.

Fixes: 2fbe4586cff3 ("fuse: add support for opening dax device as backing")
Signed-off-by: Joas Antonio dos Santos <joasantonio108@gmail.com>
---
Found by reviewing the v7.4-rc1 fs/fuse changes with an LLM-based
assistant, following up on the Sashiko review of the dax backing series
that pointed out the missing ->read_folio; the IS_DAX() check added for
it does not cover CONFIG_FS_DAX=n.

Tested on arm64 QEMU, v7.4-rc1 with CONFIG_FS_DAX=n and KASAN, with a
FUSE server running as uid 65534 in a user namespace that replies
INIT with no flags, LOOKUP with FUSE_ATTR_DAX and a plain OPEN:
before, read() oopses as above; after, the read returns the file data
and unmount is clean.  The FUSE_ATTR_DAX=0 control is unchanged.

This also keeps an unprivileged server from getting S_DAX on
CONFIG_FS_DAX=y kernels without FUSE_PASSTHROUGH_V2, which is where
"fuse: refuse FUSE_NOTIFY_STORE for DAX inodes" (sent 2026-10-31)
applies; that patch is still useful for servers that do negotiate
FUSE_PASSTHROUGH_V2.
---
 fs/fuse/inode.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 1341b681d0ed..7195e4d0852c 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -418,7 +418,14 @@ static void fuse_init_inode(struct inode *inode, struct fuse_attr *attr,
 		fuse_init_common(inode);
 		fuse_init_file_inode(inode, attr->flags);
 
-		if ((attr->flags & FUSE_ATTR_DAX) && !fuse_inode_vdax(inode)) {
+		/*
+		 * FUSE_ATTR_DAX is only meaningful for a dax device backing,
+		 * which needs FS_DAX and FUSE_PASSTHROUGH_V2.  Without FS_DAX
+		 * S_DAX is 0 and the inode would be left with fuse_dax_aops
+		 * on the page cache I/O paths.
+		 */
+		if (IS_ENABLED(CONFIG_FS_DAX) && fc->backing_id_64 &&
+		    (attr->flags & FUSE_ATTR_DAX) && !fuse_inode_vdax(inode)) {
 			inode->i_flags |= S_DAX;
 			inode->i_data.a_ops = &fuse_dax_aops;
 		}

---
base-commit: 6628e7d4c6b25c8d18f1345e3a20d21829aae7e4
change-id: 20261102-fuse-attr-dax-c1367d6c34f4

Best regards,
-- 
Joas Antonio dos Santos <joasantonio108@gmail.com>



^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2026-11-02 12:56 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-11-02 12:56 [PATCH] fuse: ignore FUSE_ATTR_DAX unless a dax backing is possible Joas Antonio dos Santos via B4 Relay

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®