From: Rik van Riel <riel@surriel.com>
To: linux-kernel@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>,
David Hildenbrand <david@kernel.org>,
Jason Gunthorpe <jgg@ziepe.ca>,
John Hubbard <jhubbard@nvidia.com>, Peter Xu <peterx@redhat.com>,
Suren Baghdasaryan <surenb@google.com>,
Yuan-Hao Hsu <aa9736195201@gmail.com>,
Christoph Hellwig <hch@infradead.org>,
linux-mm@kvack.org, Rik van Riel <riel@surriel.com>
Subject: [PATCH 5/8] mm/gup: fill the pages array outside the pud/pmd lock
Date: Mon, 2 Nov 2026 14:30:23 -0500 [thread overview]
Message-ID: <20261102193026.3860700-6-riel@surriel.com> (raw)
In-Reply-To: <20261102193026.3860700-1-riel@surriel.com>
follow_huge_pud() and follow_huge_pmd() fill pages[] and flush the page's
caches while still holding the pud or pmd lock. Neither flush_anon_page()
nor flush_dcache_page() needs that lock.
Have the huge paths store the page and let follow_pud_mask() and
follow_pmd_mask() do the fill after they unlock, so the flushes happen
outside the critical section.
This should be safe because try_grab_folio() has already taken a folio
reference before the unlock, so nothing can free the page while the fill
runs, and the fill itself touches neither the page tables nor the pud or
pmd entry it was reached through.
No functional changes intended.
Suggested-by: David Hildenbrand <david@kernel.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Rik van Riel <riel@surriel.com>
---
mm/gup.c | 20 ++++++++++++++++++--
1 file changed, 18 insertions(+), 2 deletions(-)
diff --git a/mm/gup.c b/mm/gup.c
index c2a4f5b987ced..2edffc424f272 100644
--- a/mm/gup.c
+++ b/mm/gup.c
@@ -714,7 +714,8 @@ static long follow_huge_pud(struct vm_area_struct *vma,
*page_mask = HPAGE_PUD_NR - 1;
- gup_fill_pages(vma, addr, page, 1, pages);
+ if (pages)
+ pages[0] = page;
return 1;
}
@@ -779,7 +780,8 @@ static long follow_huge_pmd(struct vm_area_struct *vma,
page += (addr & ~HPAGE_PMD_MASK) >> PAGE_SHIFT;
*page_mask = HPAGE_PMD_NR - 1;
- gup_fill_pages(vma, addr, page, 1, pages);
+ if (pages)
+ pages[0] = page;
return 1;
}
@@ -1016,6 +1018,14 @@ static long follow_pmd_mask(struct vm_area_struct *vma,
}
ret = follow_huge_pmd(vma, address, pmd, flags, page_mask, pages);
spin_unlock(ptl);
+
+ /*
+ * The ref is already held, so the page cannot go away: fill the
+ * array and flush caches without the pmd lock.
+ */
+ if (ret > 0 && pages)
+ gup_fill_pages(vma, address, pages[0], ret, pages);
+
return ret;
}
@@ -1037,6 +1047,12 @@ static long follow_pud_mask(struct vm_area_struct *vma,
ptl = pud_lock(mm, pudp);
ret = follow_huge_pud(vma, address, pudp, flags, page_mask, pages);
spin_unlock(ptl);
+ /*
+ * The ref is already held, so the page cannot go away: fill
+ * the array and flush caches without the lock.
+ */
+ if (ret > 0 && pages)
+ gup_fill_pages(vma, address, pages[0], ret, pages);
if (ret)
return ret;
return no_page_table(vma, flags, address);
--
2.53.0-Meta
next prev parent reply other threads:[~2026-11-02 19:30 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-02 19:30 [RFC PATCH v5 0/8] batch lookups in follow_page_mask() Rik van Riel
2026-11-02 19:30 ` [PATCH 1/8] mm/gup: break out gup_fill_pages() helper Rik van Riel
2026-11-03 8:43 ` David Hildenbrand (Arm)
2026-11-02 19:30 ` [PATCH 2/8] mm/gup: convert follow_page_mask() to return a long Rik van Riel
2026-11-02 19:30 ` [PATCH 3/8] mm/gup: split out folio grab-and-store helper Rik van Riel
2026-11-02 19:30 ` [PATCH 4/8] mm/gup: break out gup_lookup_pte() helper Rik van Riel
2026-11-02 19:30 ` Rik van Riel [this message]
2026-11-02 19:30 ` [PATCH 6/8] mm/gup: return a huge page's full count from follow_page_mask() Rik van Riel
2026-11-02 19:30 ` [PATCH 7/8] mm/gup: walk multiple PTEs per follow_page_pte() call Rik van Riel
2026-11-02 19:30 ` [PATCH 8/8] mm/gup: batch contiguous same-folio PTEs into one refcount grab Rik van Riel
2026-11-03 8:35 ` David Hildenbrand (Arm)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261102193026.3860700-6-riel@surriel.com \
--to=riel@surriel.com \
--cc=aa9736195201@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=david@kernel.org \
--cc=hch@infradead.org \
--cc=jgg@ziepe.ca \
--cc=jhubbard@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=peterx@redhat.com \
--cc=surenb@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®