* [PATCH net] net: usb: lan78xx: resume phylink on non-reset USB resume
@ 2026-11-02 23:51 Stefano Munari
0 siblings, 0 replies; only message in thread
From: Stefano Munari @ 2026-11-02 23:51 UTC (permalink / raw)
To: Thangaraj Samynathan
Cc: UNGLinuxDriver, Andrew Lunn, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, Russell King, Oleksij Rempel,
Russell King (Oracle),
netdev, linux-usb, linux-kernel
lan78xx_suspend() calls phylink_suspend(dev->phylink, false) on an open
interface, which always stops phylink and halts the PHY. The matching
phylink_resume() is only called from lan78xx_reset_resume().
When the USB device stays powered across system sleep (e.g. s2idle) and
the USB core calls .resume instead, the link stays down until the interface
is brought down and up by hand. The ifdown triggers:
WARNING: drivers/net/phy/phy.c:1670 at phy_stop+0x44/0xc8
called from state HALTED
Move phylink_resume() to the end of lan78xx_resume(), which both resume
paths go through, and call it only if the resume succeeded and the
interface was open, mirroring lan78xx_suspend(). As a side effect,
lan78xx_reset_resume() no longer starts phylink on a closed interface.
Tested on a Raspberry Pi 3B+ (LAN7515) with s2idle: the link now comes
back up on its own after resume and ifdown no longer warns.
Fixes: e110bc825897 ("net: usb: lan78xx: Convert to PHYLINK for improved PHY and MAC management")
Signed-off-by: Stefano Munari <stefanomunari.sm@gmail.com>
---
ftrace on unpatched kernel (s2idle, woken from PL011 UART IRQ):
lan78xx_suspend <- usb_suspend_both
phylink_suspend <- lan78xx_suspend
phylink_stop <- phylink_suspend
phy_stop <- phylink_stop
lan78xx_resume <- usb_resume_interface
No lan78xx_reset_resume() or phylink_resume() on the resume path.
ftrace on patched kernel:
lan78xx_resume <- usb_resume_interface
phylink_resume <- lan78xx_resume
phylink_start <- lan78xx_resume
phy_start <- lan78xx_resume
phylink_start + phy_start report lan78xx_resume as parent
since both are tail calls. On tested kernel phylink_start is tail call
optimized since with CONFIG_SFP=n sfp_upstream_start() is an empty stub.
---
drivers/net/usb/lan78xx.c | 16 +++++++---------
1 file changed, 7 insertions(+), 9 deletions(-)
diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index 181e8c087655..0136818e8cb0 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -5371,6 +5371,12 @@ static int lan78xx_resume(struct usb_interface *intf)
out:
mutex_unlock(&dev->dev_mutex);
+ if (!ret && dev_open) {
+ rtnl_lock();
+ phylink_resume(dev->phylink);
+ rtnl_unlock();
+ }
+
return ret;
}
@@ -5385,15 +5391,7 @@ static int lan78xx_reset_resume(struct usb_interface *intf)
if (ret < 0)
return ret;
- ret = lan78xx_resume(intf);
- if (ret < 0)
- return ret;
-
- rtnl_lock();
- phylink_resume(dev->phylink);
- rtnl_unlock();
-
- return 0;
+ return lan78xx_resume(intf);
}
static const struct usb_device_id products[] = {
--
2.55.0
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2026-11-02 23:51 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-11-02 23:51 [PATCH net] net: usb: lan78xx: resume phylink on non-reset USB resume Stefano Munari
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®