[PATCH v3] Docs/admin-guide/mm/damon/reclaim: improve language

[Manuel Ebner <manuelebnerli@mailbox.org>]

Fix upper case.  Fix tenses.  Replace 'set as' with 'set to'.  Add space after
sentence to make it double space.  Rewrite and refine complex sentences.

CC: Aveline Noir <jm5905938@gmail.com>
Signed-off-by: Manuel Ebner <manuelebnerli@mailbox.org>
---
That's the final version.

[v3]
 Combine both patches into one
 Incorporate SJ's feedback

[v2]
 https://lore.kernel.org/all/20261027185938.2526259-2-manuelebnerli@mailbox.org/
 Include suggestions from SJ and Aveline
 Split [v1] into
  [1/2 v2] Docs/admin-guide/mm/damon/reclaim: improve grammar and style
  [2/2 v2] Docs/admin-guide/mm/damon/reclaim: rewrite complex parts
 Fixed an upper case and a missing double space -> [1/2 v2]

[v1]
 https://lore.kernel.org/all/20261015080623.808458-2-manuelebnerli@mailbox.org/
---
 .../admin-guide/mm/damon/reclaim.rst          | 43 ++++++++++---------
 1 file changed, 22 insertions(+), 21 deletions(-)

diff --git a/Documentation/admin-guide/mm/damon/reclaim.rst b/Documentation/admin-guide/mm/damon/reclaim.rst
index e4e2ffa52e..789db7099d 100644
--- a/Documentation/admin-guide/mm/damon/reclaim.rst
+++ b/Documentation/admin-guide/mm/damon/reclaim.rst
@@ -4,7 +4,7 @@
 DAMON-based Reclamation
 =======================
 
-DAMON-based Reclamation (DAMON_RECLAIM) is a static kernel module that aimed to
+DAMON-based reclamation (DAMON_RECLAIM) is a static kernel module that aimes to
 be used for proactive and lightweight reclamation under light memory pressure.
 It doesn't aim to replace the LRU-list based page_granularity reclamation, but
 to be selectively used for different level of memory pressure and requirements.
@@ -30,12 +30,13 @@ guests could mitigate this problem.
 How It Works?
 =============
 
-DAMON_RECLAIM finds memory regions that didn't accessed for specific time
-duration and page out.  To avoid it consuming too much CPU for the paging out
-operation, a speed limit can be configured.  Under the speed limit, it pages
-out memory regions that didn't accessed longer time first.  System
-administrators can also configure under what situation this scheme should
-automatically activated and deactivated with three memory pressure watermarks.
+DAMON_RECLAIM finds memory regions that have not been accessed for a
+specified period and attempts to page out those.  To avoid it consuming
+too much CPU for the paging out operation, a speed limit can be configured.
+Within the configured speed limit, it prioritizes regions that have been
+idle longer for reclamation.  System administrators can also configure under
+what situation this scheme should automatically be activated and deactivated
+with three memory pressure watermarks.
 
 Interface: Module Parameters
 ============================
@@ -55,10 +56,10 @@ enabled
 
 Enable or disable DAMON_RECLAIM.
 
-You can enable DAMON_RECLAIM by setting the value of this parameter as ``Y``.
-Setting it as ``N`` disables DAMON_RECLAIM.  Note that DAMON_RECLAIM could do
+You can enable DAMON_RECLAIM by setting the value of this parameter to ``Y``.
+Setting it to ``N`` disables DAMON_RECLAIM.  Note that DAMON_RECLAIM could do
 no real monitoring and reclamation due to the watermarks-based activation
-condition.  Refer to below descriptions for the watermarks parameter for this.
+condition.  Refer to below descriptions of the watermarks parameter for this.
 
 commit_inputs
 -------------
@@ -66,9 +67,9 @@ commit_inputs
 Make DAMON_RECLAIM reads the input parameters again, except ``enabled``.
 
 Input parameters that updated while DAMON_RECLAIM is running are not applied
-by default.  Once this parameter is set as ``Y``, DAMON_RECLAIM reads values
+by default.  Once this parameter is set to ``Y``, DAMON_RECLAIM reads values
 of parameters except ``enabled`` again.  Once the re-reading is done, this
-parameter is set as ``N``.  If invalid parameters are found while the
+parameter is set to ``N``.  If invalid parameters are found while the
 re-reading, DAMON_RECLAIM will be disabled.
 
 Once ``Y`` is written to this parameter, the user must not write to any
@@ -88,7 +89,7 @@ identifies the region as cold, and reclaims it.
 autotune_monitoring_intervals
 -----------------------------
 
-If this parameter is set as ``Y``, DAMON_RECLAIM automatically tunes DAMON's
+If this parameter is set to ``Y``, DAMON_RECLAIM automatically tunes DAMON's
 sampling and aggregation intervals.  The auto-tuning aims to capture meaningful
 amount of access events in each DAMON-snapshot, while keeping the sampling
 interval 5 milliseconds in minimum, and 10 seconds in maximum.  Setting this as
@@ -113,10 +114,10 @@ quota_sz
 
 Limit of size of memory for the reclamation in bytes.
 
-DAMON_RECLAIM charges amount of memory which it tried to reclaim within a time
-window (quota_reset_interval_ms) and makes no more than this limit is tried.
-This can be used for limiting consumption of CPU and IO.  If this value is
-zero, the limit is disabled.
+DAMON_RECLAIM charges the amount of memory which it tried to reclaim within a time
+window (quota_reset_interval_ms) and stops trying to reclaim memory when this limit
+is reached.  This can be used for limiting consumption of CPU and IO.  If this value
+is zero, the limit is disabled.
 
 128 MiB by default.
 
@@ -137,7 +138,7 @@ quota_mem_pressure_us
 
 Desired level of memory pressure-stall time in microseconds.
 
-While keeping the caps that set by other quotas, DAMON_RECLAIM automatically
+While keeping the caps that are set by other quotas, DAMON_RECLAIM automatically
 increases and decreases the effective level of the quota aiming this level of
 memory pressure is incurred.  System-wide ``some`` memory PSI in microseconds
 per quota reset interval (``quota_reset_interval_ms``) is collected and
@@ -219,7 +220,7 @@ monitoring.  This can be used to set lower-bound of the monitoring quality.
 But, setting this too high could result in increased monitoring overhead.
 Please refer to the DAMON documentation (:doc:`usage`) for more detail.
 
-Note that this must be 3 or higher. Please refer to the :ref:`Monitoring
+Note that this must be 3 or higher.  Please refer to the :ref:`Monitoring
 <damon_design_monitoring>` section of the design document for the rationale
 behind this lower bound.
 
@@ -263,7 +264,7 @@ This parameter is for setting and getting the :ref:`address unit
 
 ``monitor_region_start`` and ``monitor_region_end`` should be provided in this
 unit.  For example, let's suppose ``addr_unit``, ``monitor_region_start`` and
-``monitor_region_end`` are set as ``1024``, ``0`` and ``10``, respectively.
+``monitor_region_end`` are set to ``1024``, ``0`` and ``10``, respectively.
 Then DAMON_RECLAIM will work for 10 KiB length of physical address range that
 starts from address zero (``[0 * 1024, 10 * 1024)`` in bytes).
 
@@ -280,7 +281,7 @@ skip_anon
 
 Skip anonymous pages reclamation.
 
-If this parameter is set as ``Y``, DAMON_RECLAIM does not reclaim anonymous
+If this parameter is set to ``Y``, DAMON_RECLAIM does not reclaim anonymous
 pages.  By default, ``N``.
 
 
-- 
2.55.0