From: Larisa Grigore <larisa.grigore@oss.nxp.com>
To: Larisa Grigore <larisa.grigore@oss.nxp.com>,
NXP S32 Linux Team <s32@nxp.com>,
Alim Akhtar <alim.akhtar@samsung.com>,
Bart Van Assche <bvanassche@acm.org>,
Bean Huo <beanhuo@micron.com>,
Stanley Jhu <stanleyjhu@google.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
"James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>,
"Martin K. Petersen" <mkp@kernel.org>,
Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>,
Ajay Neeli <ajay.neeli@amd.com>,
Manivannan Sadhasivam <mani@kernel.org>,
Pedro Sousa <pedrom.sousa@synopsys.com>,
Adrian Hunter <adrian.hunter@intel.com>,
Can Guo <quic_cang@quicinc.com>,
Asutosh Das <quic_asutoshd@quicinc.com>
Cc: imx@lists.linux.dev, linux-scsi@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-msm@vger.kernel.org, clizzi@redhat.com,
aruizrui@redhat.com, eballetb@redhat.com, echanude@redhat.com,
Frank Li <Frank.Li@nxp.com>
Subject: [PATCH v10 08/11] dt-bindings: ufs: Add NXP S32N79 UFS host controller
Date: Tue, 3 Nov 2026 14:32:12 +0100 [thread overview]
Message-ID: <20261103133215.1385823-9-larisa.grigore@oss.nxp.com> (raw)
In-Reply-To: <20261103133215.1385823-1-larisa.grigore@oss.nxp.com>
Document the UFS host controller on the NXP S32N79 SoC.
The S32N79 M-PHY has two data lanes per direction and the driver programs
both of them, so restrict lanes-per-direction to 2.
The UFS core manages only the clocks added by the platform glue. Since
freq-table-hz is deprecated, the binding requires operating-points-v2 and
clock-names. As S32N79 does not scale the UFS clock, the OPP table contains
a single 0 Hz entry, which keeps the provider-configured rate while
allowing the clock to be enabled and gated.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Larisa Grigore <larisa.grigore@oss.nxp.com>
---
.../bindings/ufs/nxp,s32n79-ufshc.yaml | 68 +++++++++++++++++++
1 file changed, 68 insertions(+)
create mode 100644 Documentation/devicetree/bindings/ufs/nxp,s32n79-ufshc.yaml
diff --git a/Documentation/devicetree/bindings/ufs/nxp,s32n79-ufshc.yaml b/Documentation/devicetree/bindings/ufs/nxp,s32n79-ufshc.yaml
new file mode 100644
index 000000000000..541b59b8c89a
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/nxp,s32n79-ufshc.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ufs/nxp,s32n79-ufshc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP S32N79 Universal Flash Storage (UFS) Controller
+
+maintainers:
+ - Larisa Grigore <larisa.grigore@oss.nxp.com>
+
+properties:
+ compatible:
+ const: nxp,s32n79-ufshc
+
+ reg:
+ items:
+ - description: UFS Host Controller registers
+ - description: System Control Module registers
+
+ reg-names:
+ items:
+ - const: ufshc
+ - const: scm
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: core
+
+ lanes-per-direction:
+ const: 2
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - operating-points-v2
+
+allOf:
+ - $ref: ufs-common.yaml
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ ufshc@4ac80000 {
+ compatible = "nxp,s32n79-ufshc";
+ reg = <0x4ac80000 0x1000>, <0x4ac40000 0x1000>;
+ reg-names = "ufshc", "scm";
+ interrupt-parent = <&irqsteer_coss>;
+ interrupts = <211>;
+ clocks = <&clks 0x92>;
+ clock-names = "core";
+ operating-points-v2 = <&ufs_opp_table>;
+
+ ufs_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-0 {
+ opp-hz = /bits/ 64 <0>;
+ };
+ };
+ };
--
2.43.0
next prev parent reply other threads:[~2026-11-03 13:32 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-03 13:32 [PATCH v10 00/11] Add S32N79RDB UFS support Larisa Grigore
2026-11-03 13:32 ` [PATCH v10 01/11] ufs: core: Return a negative errno from WLUN suspend/resume Larisa Grigore
2026-11-03 17:53 ` Bart Van Assche
2026-11-03 13:32 ` [PATCH v10 02/11] ufs: dwc: Return a negative error if the link is down Larisa Grigore
2026-11-03 13:32 ` [PATCH v10 03/11] ufs: unipro: Move Tx/Rx FSM state definitions to unipro.h Larisa Grigore
2026-11-03 17:54 ` Bart Van Assche
2026-11-03 13:32 ` [PATCH v10 04/11] ufs: unipro: Add TX/RX FSM state attributes Larisa Grigore
2026-11-03 17:54 ` Bart Van Assche
2026-11-03 13:32 ` [PATCH v10 05/11] ufs: core: Add common Hibern8 TX FSM polling helper Larisa Grigore
2026-11-03 13:32 ` [PATCH v10 06/11] ufs: dwc: Move Versal2 M-PHY CREG access helpers into ufshcd-dwc Larisa Grigore
2026-11-03 13:32 ` [PATCH v10 07/11] ufs: dwc: Export common clock divider and link status helpers Larisa Grigore
2026-11-03 13:32 ` Larisa Grigore [this message]
2026-11-03 13:32 ` [PATCH v10 09/11] ufs: dwc: Sort CBCRCTRL and CBREFCLKCTRL2 by offset Larisa Grigore
2026-11-03 13:32 ` [PATCH v10 10/11] ufs: s32n7: Add NXP S32N79 UFS host controller driver Larisa Grigore
2026-11-03 17:57 ` Bart Van Assche
2026-11-03 13:32 ` [PATCH v10 11/11] MAINTAINERS: Add NXP S32N7 UFS host controller entry Larisa Grigore
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261103133215.1385823-9-larisa.grigore@oss.nxp.com \
--to=larisa.grigore@oss.nxp.com \
--cc=Frank.Li@nxp.com \
--cc=James.Bottomley@HansenPartnership.com \
--cc=adrian.hunter@intel.com \
--cc=ajay.neeli@amd.com \
--cc=alim.akhtar@samsung.com \
--cc=aruizrui@redhat.com \
--cc=beanhuo@micron.com \
--cc=bvanassche@acm.org \
--cc=clizzi@redhat.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=eballetb@redhat.com \
--cc=echanude@redhat.com \
--cc=imx@lists.linux.dev \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=mani@kernel.org \
--cc=mkp@kernel.org \
--cc=pedrom.sousa@synopsys.com \
--cc=quic_asutoshd@quicinc.com \
--cc=quic_cang@quicinc.com \
--cc=robh@kernel.org \
--cc=s32@nxp.com \
--cc=sai.krishna.potthuri@amd.com \
--cc=stanleyjhu@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®