[PATCH v2 1/1] usb: renesas_usbhs: use dmaengine_get_dma_device() instead of chan->device->dev

[PATCH v2 1/1] usb: renesas_usbhs: use dmaengine_get_dma_device() instead of chan->device->dev

[Frank.Li]

From: Frank Li <Frank.Li@nxp.com>

Replace direct dma_chan::device::dev access with the proper
dmaengine_get_dma_device() for consumer API.

chan->device->dev is not always the device used for DMA mapping.
Some DMA engines support per-channel IOMMU mappings, so different
channels may use different DMA devices.  dmaengine_get_dma_device()
returns the correct device for each channel.

This also prepares for making the DMA engine provider data structures
private. DMA consumers should not access DMA engine internals directly.

Assisted-by: LLM
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
change in v2
- Update subject
- v1 https://lore.kernel.org/all/20260917205625.1299375-1-Frank.Li@oss.nxp.com/
---
 drivers/usb/renesas_usbhs/fifo.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c
index bac6f8fd0055e..d6fa436112aba 100644
--- a/drivers/usb/renesas_usbhs/fifo.c
+++ b/drivers/usb/renesas_usbhs/fifo.c
@@ -810,7 +810,7 @@ static int __usbhsf_dma_map_ctrl(struct usbhs_pkt *pkt, int map)
 	struct usbhs_fifo *fifo = usbhs_pipe_to_fifo(pipe);
 	struct dma_chan *chan = usbhsf_dma_chan_get(fifo, pkt);
 
-	return info->dma_map_ctrl(chan->device->dev, pkt, map);
+	return info->dma_map_ctrl(dmaengine_get_dma_device(chan), pkt, map);
 }
 
 static void usbhsf_dma_complete(void *arg,
-- 
2.43.0