[PATCH v4 0/2] regulator: rpi-panel-v2: Add vcc-supply

[PATCH v4 0/2] regulator: rpi-panel-v2: Add vcc-supply

[Shashank Maurya]

This series adds a vcc-supply property to both the dt-binding and the
driver:

- Patch 1/2: dt-bindings - documents the vcc-supply property as an
    optional property.
  - Patch 2/2: driver - uses devm_regulator_get() to obtain and enable
    the vcc supply at the start of probe, before any I2C access.

---
Changes in v4:
- Rebased onto the latest regulator for-next branch.
- No functional changes.
- Link to v3: https://patch.msgid.link/20260922-rpi_reg-v3-0-9214321c4070@oss.qualcomm.com

Changes in v3:
- dt-bindings: make vcc-supply optional instead of required, to preserve
  compatibility with existing device trees that do not describe the
  supply.
- Driver is unchanged from v2: devm_regulator_get() returns a dummy
  regulator when the supply is absent, so an optional binding needs no
  driver change.
- Link to v2: https://patch.msgid.link/20260907-rpi_reg-v2-0-0c59aa60d31f@oss.qualcomm.com

Changes in v2:
  - Made vcc-supply required instead of optional (devm_regulator_get()
    instead of devm_regulator_get_optional()).
  - Added vcc-supply to the required list in the dt-binding schema.

Changes in v1:
  - Initial submission with optional vcc-supply support.

To: Liam Girdwood <lgirdwood@gmail.com>
To: Mark Brown <broonie@kernel.org>
To: Rob Herring <robh@kernel.org>
To: Krzysztof Kozlowski <krzk+dt@kernel.org>
To: Conor Dooley <conor+dt@kernel.org>
To: Florian Fainelli <florian.fainelli@broadcom.com>
To: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
To: Marek Vasut <marek.vasut+renesas@mailbox.org>
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-rpi-kernel@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org

---
Shashank Maurya (2):
      dt-bindings: regulator: rpi-panel-v2: Add vcc-supply property
      regulator: rpi-panel-v2: Add vcc-supply support

 .../raspberrypi,7inch-touchscreen-panel-regulator-v2.yaml    |  4 ++++
 drivers/regulator/rpi-panel-v2-regulator.c                   | 12 ++++++++++++
 2 files changed, 16 insertions(+)
---
base-commit: 5436a50a0b44b448f965e928507b5159059dee57
change-id: 20260907-rpi_reg-8c6885b35e5b

Best regards,
--  
Shashank Maurya <shashank.maurya@oss.qualcomm.com>

[PATCH v4 1/2] dt-bindings: regulator: rpi-panel-v2: Add vcc-supply property

[Shashank Maurya]

Add an optional vcc-supply property to the Raspberry Pi 7" touchscreen
panel V2 regulator binding. The panel controller MCU is powered from an
external power rail, which has to be supplied before any I2C
communication can take place.

The property is optional so that existing device trees which do not
describe the supply remain valid.

Signed-off-by: Shashank Maurya <shashank.maurya@oss.qualcomm.com>
---
 .../regulator/raspberrypi,7inch-touchscreen-panel-regulator-v2.yaml   | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator-v2.yaml b/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator-v2.yaml
index 37b9ed371b67..3e2cbcad6490 100644
--- a/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator-v2.yaml
+++ b/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator-v2.yaml
@@ -35,6 +35,9 @@ properties:
     const: 3
     description: See ../../pwm/pwm.yaml for description of the cell formats.
 
+  vcc-supply:
+    description: Regulator supplying power to the panel controller.
+
 additionalProperties: false
 
 required:
@@ -55,6 +58,7 @@ examples:
         gpio-controller;
         #gpio-cells = <2>;
         #pwm-cells = <3>;
+        vcc-supply = <&vcc_reg>;
       };
     };
 

-- 
2.34.1

[PATCH v4 2/2] regulator: rpi-panel-v2: Add vcc-supply support

[Shashank Maurya]

The Raspberry Pi 7" touchscreen panel V2 MCU is powered from an external
power rail which has to be enabled before any I2C register access is
attempted. Use devm_regulator_get() to obtain the vcc supply and enable
it at the start of probe.

devm_regulator_get() returns a dummy regulator when the supply is not
described in the device tree, so device trees without a vcc-supply
property keep working as before.

Signed-off-by: Shashank Maurya <shashank.maurya@oss.qualcomm.com>
---
 drivers/regulator/rpi-panel-v2-regulator.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/regulator/rpi-panel-v2-regulator.c b/drivers/regulator/rpi-panel-v2-regulator.c
index 30b78aa75ee3..e54d675962e7 100644
--- a/drivers/regulator/rpi-panel-v2-regulator.c
+++ b/drivers/regulator/rpi-panel-v2-regulator.c
@@ -11,6 +11,7 @@
 #include <linux/module.h>
 #include <linux/pwm.h>
 #include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
 
 /* I2C registers of the microcontroller. */
 #define REG_ID		0x01
@@ -66,10 +67,21 @@ static int rpi_panel_v2_i2c_probe(struct i2c_client *i2c)
 		.parent		= &i2c->dev,
 		.reg_set_base	= REG_POWERON,
 	};
+	struct regulator *vcc;
 	struct regmap *regmap;
 	struct pwm_chip *pc;
 	int ret;
 
+	vcc = devm_regulator_get(&i2c->dev, "vcc");
+	if (IS_ERR(vcc))
+		return dev_err_probe(&i2c->dev, PTR_ERR(vcc),
+				     "Failed to get vcc supply\n");
+
+	ret = regulator_enable(vcc);
+	if (ret)
+		return dev_err_probe(&i2c->dev, ret,
+				     "Failed to enable vcc supply\n");
+
 	pc = devm_pwmchip_alloc(&i2c->dev, 1, 0);
 	if (IS_ERR(pc))
 		return PTR_ERR(pc);

-- 
2.34.1

Re: [PATCH v4 2/2] regulator: rpi-panel-v2: Add vcc-supply support

[Mark Brown]

> The Raspberry Pi 7" touchscreen panel V2 MCU is powered from an external
> power rail which has to be enabled before any I2C register access is
> attempted. Use devm_regulator_get() to obtain the vcc supply and enable
> it at the start of probe.

> +	ret = regulator_enable(vcc);
> +	if (ret)
> +		return dev_err_probe(&i2c->dev, ret,
> +				     "Failed to enable vcc supply\n");

Nothing ever undoes this enable.

-- 
Mark Brown <broonie@kernel.org>

Re: [PATCH v4 1/2] dt-bindings: regulator: rpi-panel-v2: Add vcc-supply property

[Rob Herring]

On Wed, Nov 04, 2026 at 01:40:47PM +0530, Shashank Maurya wrote:
> Add an optional vcc-supply property to the Raspberry Pi 7" touchscreen
> panel V2 regulator binding. The panel controller MCU is powered from an
> external power rail, which has to be supplied before any I2C
> communication can take place.
> 
> The property is optional so that existing device trees which do not
> describe the supply remain valid.
> 
> Signed-off-by: Shashank Maurya <shashank.maurya@oss.qualcomm.com>

Missing Krzysztof's ack.