* [PATCH net v1 1/1] net: phylink: keep initial advertising settings
@ 2026-11-04 12:55 Thilo Zirnstein
0 siblings, 0 replies; only message in thread
From: Thilo Zirnstein @ 2026-11-04 12:55 UTC (permalink / raw)
To: linux, andrew, hkallweit1, davem, edumazet, kuba, pabeni
Cc: netdev, linux-kernel, Thilo Zirnstein
If the net device is phylink based,
consists of a mac with a phy connected and the
mac driver does add the phy while the ndo_open callback,
initial advertising settings of the link may be overwritten
during phylink_bringup_phy.
The mode of action is as follows:
* The link was not up yet - no phy connected
* the user configures the advertisement of the interface
* the mac driver delegates the call to phylink_ethtool_ksettings_set
* here we are not configuring the phy - it does not exist yet
* the user set up the interface
* the mac drivers calls phylink_connect_phy
* calls phylink_bringup_phy
* overwrites advertisement with
* linkmode_copy(config.advertising, phy->advertising);
* linkmode_copy(pl->link_config.advertising,
config.advertising);
Connecting the phy while ndo_open callback seems to be a common pattern,
affected drivers are:
* macb
* r8169
* stmmac
* tn40xx
The advertising settings can be kept by using the intersection
of the phylink advert bits and the phy advert bits.
This was observed and tested on a
Xilinx Zyqnmp system with builtin macb ethernet interface.
Fixes: 9525ae83959b ("phylink: add phylink infrastructure")
Signed-off-by: Thilo Zirnstein <thi.zirnstein@gmail.com>
---
drivers/net/phy/phylink.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index e885da1c2831..145f181bc9d3 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -2320,6 +2320,7 @@ static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy,
pl->phy_state.duplex = DUPLEX_UNKNOWN;
pl->phy_state.rate_matching = RATE_MATCH_NONE;
linkmode_copy(pl->supported, supported);
+ linkmode_and(config.advertising, config.advertising, pl->link_config.advertising);
linkmode_copy(pl->link_config.advertising, config.advertising);
/* Restrict the phy advertisement according to the MAC support. */
--
2.43.0
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2026-11-04 12:55 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-11-04 12:55 [PATCH net v1 1/1] net: phylink: keep initial advertising settings Thilo Zirnstein
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®