From: Maxime Chevallier <maxime.chevallier@bootlin.com>
To: "Jonathan Cameron" <jic23@kernel.org>,
"David Lechner" <dlechner@baylibre.com>,
"Nuno Sá" <nuno.sa@analog.com>,
"Andy Shevchenko" <andy@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>
Cc: Maxime Chevallier <maxime.chevallier@bootlin.com>,
Matti Vaittinen <mazziesaccount@gmail.com>,
Rodolfo Giometti <giometti@enneenne.com>,
Marcelo Schmitt <marcelo.schmitt@analog.com>,
Antoniu Miclaus <antoniu.miclaus@analog.com>,
Angelo Dureghello <adureghello@baylibre.com>,
Tobias Sperling <tobias.sperling@softing.com>,
Eason Yang <j2anfernee@gmail.com>,
Marilene Andrade Garcia <marilene.agarcia@gmail.com>,
Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>,
duje@dujemihanovic.xyz, herve.codina@bootlin.com,
thomas.petazzoni@bootlin.com, linux-iio@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 0/2] iio: adc: add driver for Texas Instruments TLA2528 adc
Date: Wed, 4 Nov 2026 13:57:23 +0100 [thread overview]
Message-ID: <20261104125726.1754980-1-maxime.chevallier@bootlin.com> (raw)
Hi everyone,
This is V3 for the TLA2528 ADC driver.
It takes all reviews from Jonathan, Matti, Rodolfo and Victor into
account, thanks again everyone for that :)
Matti, I've not put your review tag as I've reworked things quite a bit,
sorry about that.
Maxime
V3:
- Require channels to be described
- Use guard()
- Add Datasheet link
- Drop the unused registers
- Use named initializers in the id table
- Collect Conor's Ack
V2: https://lore.kernel.org/r/20261030164705.297354-1-maxime.chevallier@bootlin.com
- Describe AVDD and DVDD in the bindings instead of vref.
- Add gpio-controller
- Allow describing individual ADC channels
- Switch to regmap with caching
- Reset the chip at probe time
- Small cleanups following all the reviews
- Moved MAINTAINERS to patch 1
V1: https://lore.kernel.org/linux-iio/20251223155534.220504-1-maxime.chevallier@bootlin.com/
Maxime Chevallier (2):
dt-bindings: iio: adc: add Texas Instruments TLA2528
iio: adc: add driver for Texas Instruments TLA2528 adc
.../bindings/iio/adc/ti,tla2528.yaml | 91 ++++++++
MAINTAINERS | 7 +
drivers/iio/adc/Kconfig | 12 +
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/ti-tla2528.c | 215 ++++++++++++++++++
5 files changed, 326 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,tla2528.yaml
create mode 100644 drivers/iio/adc/ti-tla2528.c
--
2.56.0
next reply other threads:[~2026-11-04 12:57 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-04 12:57 Maxime Chevallier [this message]
2026-11-04 12:57 ` [PATCH v3 1/2] dt-bindings: iio: adc: add Texas Instruments TLA2528 Maxime Chevallier
2026-11-04 13:58 ` Joshua Crofts
2026-11-04 12:57 ` [PATCH v3 2/2] iio: adc: add driver for Texas Instruments TLA2528 adc Maxime Chevallier
2026-11-04 13:56 ` Joshua Crofts
2026-11-04 15:41 ` Andy Shevchenko
2026-11-04 15:45 ` Joshua Crofts
2026-11-04 18:06 ` Maxime Chevallier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261104125726.1754980-1-maxime.chevallier@bootlin.com \
--to=maxime.chevallier@bootlin.com \
--cc=adureghello@baylibre.com \
--cc=andy@kernel.org \
--cc=antoniu.miclaus@analog.com \
--cc=conor+dt@kernel.org \
--cc=cosmin-gabriel.tanislav.xa@renesas.com \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=duje@dujemihanovic.xyz \
--cc=giometti@enneenne.com \
--cc=herve.codina@bootlin.com \
--cc=j2anfernee@gmail.com \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcelo.schmitt@analog.com \
--cc=marilene.agarcia@gmail.com \
--cc=mazziesaccount@gmail.com \
--cc=nuno.sa@analog.com \
--cc=robh@kernel.org \
--cc=thomas.petazzoni@bootlin.com \
--cc=tobias.sperling@softing.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®