From: Maxime Chevallier <maxime.chevallier@bootlin.com>
To: "Jonathan Cameron" <jic23@kernel.org>,
"David Lechner" <dlechner@baylibre.com>,
"Nuno Sá" <nuno.sa@analog.com>,
"Andy Shevchenko" <andy@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>
Cc: Maxime Chevallier <maxime.chevallier@bootlin.com>,
Matti Vaittinen <mazziesaccount@gmail.com>,
Rodolfo Giometti <giometti@enneenne.com>,
Marcelo Schmitt <marcelo.schmitt@analog.com>,
Antoniu Miclaus <antoniu.miclaus@analog.com>,
Angelo Dureghello <adureghello@baylibre.com>,
Tobias Sperling <tobias.sperling@softing.com>,
Eason Yang <j2anfernee@gmail.com>,
Marilene Andrade Garcia <marilene.agarcia@gmail.com>,
Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>,
duje@dujemihanovic.xyz, herve.codina@bootlin.com,
thomas.petazzoni@bootlin.com, linux-iio@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Conor Dooley <conor.dooley@microchip.com>
Subject: [PATCH v3 1/2] dt-bindings: iio: adc: add Texas Instruments TLA2528
Date: Wed, 4 Nov 2026 13:57:24 +0100 [thread overview]
Message-ID: <20261104125726.1754980-2-maxime.chevallier@bootlin.com> (raw)
In-Reply-To: <20261104125726.1754980-1-maxime.chevallier@bootlin.com>
The TI TLA2528 is a simple 8-channel, 12-bit ADC and GPIO chip
accessible over i2c. The ADC part has an AVDD supply that doubles as a
reference.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
.../bindings/iio/adc/ti,tla2528.yaml | 91 +++++++++++++++++++
MAINTAINERS | 6 ++
2 files changed, 97 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,tla2528.yaml
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,tla2528.yaml b/Documentation/devicetree/bindings/iio/adc/ti,tla2528.yaml
new file mode 100644
index 000000000000..7a50a5026c1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,tla2528.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,tla2528.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TLA2528 8-channel 12-bit I2C ADC
+
+maintainers:
+ - Maxime Chevallier <maxime.chevallier@bootlin.com>
+
+description:
+ Each of the 8 input pins can be configured as an analog input, a digital
+ input or a digital output.
+
+properties:
+ compatible:
+ const: ti,tla2528
+
+ reg:
+ maxItems: 1
+
+ avdd-supply:
+ description: Analog supply, also used as the ADC reference voltage.
+
+ dvdd-supply: true
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
+ "#io-channel-cells":
+ const: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+patternProperties:
+ "^channel@[0-7]$":
+ type: object
+ $ref: adc.yaml
+ description: Represents an analog input.
+
+ properties:
+ reg:
+ description: AIN pin number
+ minimum: 0
+ maximum: 7
+
+ required:
+ - reg
+
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - avdd-supply
+ - dvdd-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc@17 {
+ compatible = "ti,tla2528";
+ reg = <0x17>;
+ avdd-supply = <®_adc_supply>;
+ dvdd-supply = <®_adc_supply>;
+ #io-channel-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ reg = <0>;
+ };
+
+ channel@3 {
+ reg = <3>;
+ };
+ };
+ };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 93abbb315065..9ccb33ada3d5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -27758,6 +27758,12 @@ F: include/dt-bindings/soc/ti,sci_pm_domain.h
F: include/linux/soc/ti/ti_sci_inta_msi.h
F: include/linux/soc/ti/ti_sci_protocol.h
+TEXAS INSTRUMENTS' TLA2528 ADC DRIVER
+M: Maxime Chevallier <maxime.chevallier@bootlin.com>
+L: linux-iio@vger.kernel.org
+S: Supported
+F: Documentation/devicetree/bindings/iio/adc/ti,tla2528.yaml
+
TEXAS INSTRUMENTS' TMP117 TEMPERATURE SENSOR DRIVER
M: Puranjay Mohan <puranjay@kernel.org>
L: linux-iio@vger.kernel.org
--
2.56.0
next prev parent reply other threads:[~2026-11-04 12:57 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-04 12:57 [PATCH v3 0/2] iio: adc: add driver for Texas Instruments TLA2528 adc Maxime Chevallier
2026-11-04 12:57 ` Maxime Chevallier [this message]
2026-11-04 13:58 ` [PATCH v3 1/2] dt-bindings: iio: adc: add Texas Instruments TLA2528 Joshua Crofts
2026-11-04 12:57 ` [PATCH v3 2/2] iio: adc: add driver for Texas Instruments TLA2528 adc Maxime Chevallier
2026-11-04 13:56 ` Joshua Crofts
2026-11-04 15:41 ` Andy Shevchenko
2026-11-04 15:45 ` Joshua Crofts
2026-11-04 18:06 ` Maxime Chevallier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261104125726.1754980-2-maxime.chevallier@bootlin.com \
--to=maxime.chevallier@bootlin.com \
--cc=adureghello@baylibre.com \
--cc=andy@kernel.org \
--cc=antoniu.miclaus@analog.com \
--cc=conor+dt@kernel.org \
--cc=conor.dooley@microchip.com \
--cc=cosmin-gabriel.tanislav.xa@renesas.com \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=duje@dujemihanovic.xyz \
--cc=giometti@enneenne.com \
--cc=herve.codina@bootlin.com \
--cc=j2anfernee@gmail.com \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcelo.schmitt@analog.com \
--cc=marilene.agarcia@gmail.com \
--cc=mazziesaccount@gmail.com \
--cc=nuno.sa@analog.com \
--cc=robh@kernel.org \
--cc=thomas.petazzoni@bootlin.com \
--cc=tobias.sperling@softing.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®