[PATCH v3 2/8] gpiolib: fix fast-path cancellation in gpiod_get_array()

[Dmitry Torokhov <dmitry.torokhov@gmail.com>]

In gpiod_get_array(), when a pin on the same chip is not in hardware
order and the preceding pins form a contiguous block, the fast path is
cancelled by setting array_info to NULL. However, descs->info was
already populated with the array_info pointer during the first
iteration, leaving descs->info pointing to the aborted array_info.
Consequently, subsequent array operations still use the fast path with
remaining bits set in the masks and wrong hardware pin numbers.

Clear descs->info alongside array_info when cancelling the fast path so
callers do not erroneously use the aborted array_info.

Fixes: c4c958aa64f3 ("gpiolib: Fix array members of same chip processed separately")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/gpio/gpiolib.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index a5a519c0f001..e095aaef0a09 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -5307,6 +5307,7 @@ struct gpio_descs *__must_check gpiod_get_array(struct device *dev,
 			 * hardware number is different from its array index.
 			 */
 			if (bitmap_full(array_info->get_mask, i)) {
+				descs->info = NULL;
 				array_info = NULL;
 			} else {
 				__clear_bit(i, array_info->get_mask);

-- 
2.56.0.506.g506a7eabc5-goog