From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Linus Walleij <linusw@kernel.org>,
Bartosz Golaszewski <brgl@kernel.org>
Cc: Andy Shevchenko <andy@kernel.org>,
Janusz Krzysztofik <jmkrzyszt@gmail.com>,
linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
Andy Shevchenko <andriy.shevchenko@intel.com>
Subject: [PATCH v3 5/8] gpiolib: use __free(gpiod_put_array) in gpiod_get_array()
Date: Thu, 05 Nov 2026 22:30:19 -0800 [thread overview]
Message-ID: <20261105-b4-gpiolib-free-v3-5-bb47ad58642d@gmail.com> (raw)
In-Reply-To: <20261105-b4-gpiolib-free-v3-0-bb47ad58642d@gmail.com>
Switch to using __free(gpiod_put_array) scope-based cleanup facility
in gpiod_get_array(), simplifying error unwinding and eliminating manual
gpiod_put_array() calls.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
drivers/gpio/gpiolib.c | 16 +++++-----------
1 file changed, 5 insertions(+), 11 deletions(-)
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index e095aaef0a09..1da91e52e51c 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -5227,28 +5227,23 @@ struct gpio_descs *__must_check gpiod_get_array(struct device *dev,
enum gpiod_flags flags)
{
struct gpio_desc *desc;
- struct gpio_descs *descs;
struct gpio_device *gdev;
struct gpio_array *array_info = NULL;
int count, bitmap_size;
unsigned long dflags;
- size_t descs_size;
count = gpiod_count(dev, con_id);
if (count < 0)
return ERR_PTR(count);
- descs_size = struct_size(descs, desc, count);
- descs = kzalloc(descs_size, GFP_KERNEL);
+ struct gpio_descs *descs __free(gpiod_put_array) = kzalloc_flex(*descs, desc, count);
if (!descs)
return ERR_PTR(-ENOMEM);
for (int i = 0; i < count; i++) {
desc = gpiod_get_index(dev, con_id, i, flags);
- if (IS_ERR(desc)) {
- gpiod_put_array(descs);
+ if (IS_ERR(desc))
return ERR_CAST(desc);
- }
descs->desc[descs->ndescs++] = desc;
@@ -5258,6 +5253,7 @@ struct gpio_descs *__must_check gpiod_get_array(struct device *dev,
* its chip as a candidate for fast bitmap processing path.
*/
if (i == 0 && gpiod_hwgpio(desc) == 0) {
+ size_t descs_size = struct_size(descs, desc, count);
struct gpio_descs *array;
bitmap_size = BITS_TO_LONGS(gdev->ngpio > count ?
@@ -5266,10 +5262,8 @@ struct gpio_descs *__must_check gpiod_get_array(struct device *dev,
array = krealloc(descs, descs_size +
struct_size(array_info, invert_mask, 3 * bitmap_size),
GFP_KERNEL | __GFP_ZERO);
- if (!array) {
- gpiod_put_array(descs);
+ if (!array)
return ERR_PTR(-ENOMEM);
- }
descs = array;
@@ -5330,7 +5324,7 @@ struct gpio_descs *__must_check gpiod_get_array(struct device *dev,
array_info->gdev->label, array_info->size,
*array_info->get_mask, *array_info->set_mask,
*array_info->invert_mask);
- return descs;
+ return_ptr(descs);
}
EXPORT_SYMBOL_GPL(gpiod_get_array);
--
2.56.0.506.g506a7eabc5-goog
next prev parent reply other threads:[~2026-11-06 6:30 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-06 6:30 [PATCH v3 0/8] gpiolib: scope-based management and cleanup for GPIO descriptor arrays Dmitry Torokhov
2026-11-06 6:30 ` [PATCH v3 1/8] gpiolib: fix GPIO descriptor leak in gpiod_get_array() Dmitry Torokhov
2026-11-06 6:30 ` [PATCH v3 2/8] gpiolib: fix fast-path cancellation " Dmitry Torokhov
2026-11-06 6:30 ` [PATCH v3 3/8] gpiolib: of: return -ENOENT from of_gpio_count() stub Dmitry Torokhov
2026-11-06 6:30 ` [PATCH v3 4/8] gpiolib: add support for scope-based management of GPIO descriptors Dmitry Torokhov
2026-11-06 6:30 ` Dmitry Torokhov [this message]
2026-11-06 6:30 ` [PATCH v3 6/8] gpiolib: avoid krealloc() in gpiod_get_array() Dmitry Torokhov
2026-11-06 13:56 ` Linus Walleij
2026-11-06 6:30 ` [PATCH v3 7/8] gpiolib: use bitmap_zalloc() for fastpath bitmaps Dmitry Torokhov
2026-11-06 13:56 ` Linus Walleij
2026-11-06 6:30 ` [PATCH v3 8/8] gpiolib: use %*pb format specifier when printing array masks Dmitry Torokhov
2026-11-06 13:57 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261105-b4-gpiolib-free-v3-5-bb47ad58642d@gmail.com \
--to=dmitry.torokhov@gmail.com \
--cc=andriy.shevchenko@intel.com \
--cc=andy@kernel.org \
--cc=brgl@kernel.org \
--cc=jmkrzyszt@gmail.com \
--cc=linusw@kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®