From: Long Zhao via B4 Relay <devnull+longzhao.ambarella.com@kernel.org>
To: Arnd Bergmann <arnd@arndb.de>,
Krzysztof Kozlowski <krzk@kernel.org>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
soc@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>
Cc: Jerome Brunet <jbrunet@baylibre.com>,
linux-clk@vger.kernel.org, Brian Masney <masneyb@kernel.org>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>,
Conor Dooley <conor+dt@kernel.org>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>,
devicetree@vger.kernel.org, Long Zhao <longzhao@ambarella.com>,
Long Zhao <zl020895@163.com>,
linux-kernel@vger.kernel.org, Linus Walleij <linusw@kernel.org>
Subject: [PATCH v11 0/5] arm64: add Ambarella CV75 SoC support
Date: Thu, 05 Nov 2026 19:06:34 +0800 [thread overview]
Message-ID: <20261105-cv75-soc-v11-0-aa6ee0b2380d@ambarella.com> (raw)
Add the Ambarella CV75 SoC and EVK support: the board binding, the
RCT clock binding and driver, ARCH_AMBARELLA, the devicetree and
MAINTAINERS.
The clock ID header is added before the devicetree that includes it,
so patch 2 (the clock binding) has to be applied before patch 4 (the
devicetree).
The ambarella vendor prefix and the CV75 secure scratchpad syscon
binding are already in linux-next. This series does not repeat
either of them.
GPIO, UART and pinctrl bindings and drivers are separate series.
This devicetree references those compatibles.
Tested on the CV75 EVK. The board boots. That boot used a local tree
that also includes the GPIO, UART and pinctrl patches.
To: Arnd Bergmann <arnd@arndb.de>
To: Krzysztof Kozlowski <krzk@kernel.org>
To: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: soc@lists.linux.dev
To: linux-arm-kernel@lists.infradead.org
To: Michael Turquette <mturquette@baylibre.com>
To: Stephen Boyd <sboyd@kernel.org>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: linux-clk@vger.kernel.org
Cc: Brian Masney <masneyb@kernel.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: Long Zhao <longzhao@ambarella.com>
Cc: Long Zhao <zl020895@163.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Long Zhao <longzhao@ambarella.com>
---
Changes in v11:
- clk: use builtin_platform_driver(). The Kconfig symbol is bool. (Brian)
- clk: drop CLK_IS_CRITICAL from the core PLL. It has no enable op. (Brian)
- clk: drop the misleading (u64) cast in the div_u64() call. (Brian)
- clk: add .suppress_bind_attrs = true to block sysfs unbind. (Brian)
- clk: drop MODULE_AUTHOR. (Brian)
- Link to v10:
https://patch.msgid.link/20261019-cv75-soc-v10-0-d386065e2dd5@ambarella.com
---
Long Zhao (5):
dt-bindings: arm: add Ambarella CV75 platforms
dt-bindings: clock: add Ambarella CV75 RCT
clk: ambarella: add CV75 RCT clock controller
arm64: ambarella: add ARCH_AMBARELLA and CV75 EVK DT
MAINTAINERS: add ARM/AMBARELLA SoC support
.../devicetree/bindings/arm/ambarella.yaml | 24 ++
.../bindings/clock/ambarella,cv75-rct.yaml | 64 ++++
MAINTAINERS | 14 +
arch/arm64/Kconfig.platforms | 6 +
arch/arm64/boot/dts/Makefile | 1 +
arch/arm64/boot/dts/ambarella/Makefile | 3 +
arch/arm64/boot/dts/ambarella/cv75-evk.dts | 30 ++
arch/arm64/boot/dts/ambarella/cv75.dtsi | 177 ++++++++++
arch/arm64/configs/defconfig | 1 +
drivers/clk/Kconfig | 1 +
drivers/clk/Makefile | 1 +
drivers/clk/ambarella/Kconfig | 8 +
drivers/clk/ambarella/Makefile | 3 +
drivers/clk/ambarella/clk-cv75.c | 361 +++++++++++++++++++++
include/dt-bindings/clock/ambarella,cv75-rct.h | 14 +
15 files changed, 708 insertions(+)
---
base-commit: 34cf6dafc47441dfb6b356a095b89c3585a93714
change-id: 20261007-cv75-soc-e628f357f066
Best regards,
--
Long Zhao <longzhao@ambarella.com>
next reply other threads:[~2026-11-05 11:07 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-05 11:06 Long Zhao via B4 Relay [this message]
2026-11-05 11:06 ` [PATCH v11 1/5] dt-bindings: arm: add Ambarella CV75 platforms Long Zhao via B4 Relay
2026-11-05 11:06 ` [PATCH v11 2/5] dt-bindings: clock: add Ambarella CV75 RCT Long Zhao via B4 Relay
2026-11-05 11:06 ` [PATCH v11 3/5] clk: ambarella: add CV75 RCT clock controller Long Zhao via B4 Relay
2026-11-05 11:06 ` [PATCH v11 4/5] arm64: ambarella: add ARCH_AMBARELLA and CV75 EVK DT Long Zhao via B4 Relay
2026-11-05 11:06 ` [PATCH v11 5/5] MAINTAINERS: add ARM/AMBARELLA SoC support Long Zhao via B4 Relay
2026-11-10 1:22 ` [PATCH v11 0/5] arm64: add Ambarella CV75 " Brian Masney
2026-11-10 8:02 ` Krzysztof Kozlowski
2026-11-10 8:23 ` Arnd Bergmann
2026-11-10 8:27 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261105-cv75-soc-v11-0-aa6ee0b2380d@ambarella.com \
--to=devnull+longzhao.ambarella.com@kernel.org \
--cc=alexandre.belloni@bootlin.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=arnd@arndb.de \
--cc=catalin.marinas@arm.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet@baylibre.com \
--cc=krzk+dt@kernel.org \
--cc=krzk@kernel.org \
--cc=krzysztof.kozlowski@oss.qualcomm.com \
--cc=linusw@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=longzhao@ambarella.com \
--cc=masneyb@kernel.org \
--cc=mturquette@baylibre.com \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=soc@lists.linux.dev \
--cc=will@kernel.org \
--cc=zl020895@163.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®