[PATCH 0/5] riscv: dts: spacemit: k3-com260: Describe SD card, SPI NOR and MAC

[Troy Mitchell <troy.mitchell@linux.spacemit.com>]

The SD card slot and the SPI NOR flash of the K3 CoM260 module, and the
MAC address stored in its EEPROM, are part of the module, but they are
either described only in the IFX carrier device tree or not described
at all.

Fix the SD card power description, move the SD card slot into the
shared CoM260 device tree and describe the SPI NOR flash there. Enable
the AT24 EEPROM driver and the ONIE TLV layout in the RISC-V defconfig,
then let the module's Ethernet controller take its MAC address from the
module EEPROM. Every carrier using the module inherits these
descriptions.

---
Troy Mitchell (5):
      riscv: dts: spacemit: k3-com260-ifx: Drop wrong SD card vmmc-supply
      riscv: dts: spacemit: k3-com260: Move SD card to the module
      riscv: dts: spacemit: k3-com260: Add SPI NOR flash
      riscv: defconfig: Enable AT24 EEPROM and ONIE TLV layout
      riscv: dts: spacemit: k3-com260: Set Ethernet MAC from EEPROM

 arch/riscv/boot/dts/spacemit/k3-com260-ifx.dts | 18 ------
 arch/riscv/boot/dts/spacemit/k3-com260.dtsi    | 76 +++++++++++++++++++++++++-
 arch/riscv/configs/defconfig                   |  2 +
 3 files changed, 77 insertions(+), 19 deletions(-)
---
base-commit: 6628e7d4c6b25c8d18f1345e3a20d21829aae7e4
change-id: 20261105-k3-com260-module-sd-nor-mac-44edede14582

Best regards,
--  
Troy Mitchell <troy.mitchell@linux.spacemit.com>